well the output looks quite normal for me
On Fri, Dec 07, 2001 at 04:39:40PM -0500, Ilia Lobsanov wrote: > `route -n` might might help... > > ilia. > > ----- Original Message ----- > From: "Michael Merting" <[EMAIL PROTECTED]> > To: <debian-laptop@lists.debian.org> > Sent: Friday, December 07, 2001 3:28 PM > Subject: pcmcia-network problem > > > > hi, > > well now ifconfig shows me all the right parameters it should show and my > network card is blinking a lot when i try to ping someone but still I cannot > reach the net (no ping comes back). > > Plz have a look at my config-files. > > best regards, > > michael > > > > ps sorry for the long file... didn't want to use lame attachments > > > > CARDCTCL ident output: > > Socket 1: > > product info: "Xircom", "CreditCard 10/100", "CE3-10/100", "1.00" > > manfid: 0x0105, 0x010a > > function: 6 (network) > > > > IFCONFIG-output: > > eth0 Link encap:Ethernet HWaddr 00:80:C7:3F:4A:26 > > inet addr:160.45.117.144 Bcast:160.45.117.159 > Mask:255.255.255.224 > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:351 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:100 > > Interrupt:3 Base address:0x300 > > > > lo Link encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > UP LOOPBACK RUNNING MTU:16436 Metric:1 > > RX packets:337 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:337 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > > > /etc/pcmcia/network - file > > #! /bin/sh > > # > > # network 1.77 2000/10/26 16:26:50 (David Hinds) > > # > > # Initialize or shutdown a PCMCIA ethernet adapter > > # > > # This script should be invoked with two arguments. The first is the > > # action to be taken, either "start", "stop", or "restart". The > > # second is the network interface name. > > # > > # The script passes an extended device address to 'network.opts' in > > # the ADDRESS variable, to retrieve device-specific configuration > > # options. The address format is "scheme,socket,instance,hwaddr" > > # where "scheme" is the current PCMCIA device configuration scheme, > > # "socket" is the socket number, "instance" is used to number multiple > > # interfaces in a single socket, and "hwaddr" is the card's hardware > > # ethernet address. > > # > > > > if [ -r ./shared ] ; then . ./shared ; else . /etc/pcmcia/shared ; fi > > > > # Get device attributes > > get_info $DEVICE > > HWADDR=`/sbin/ifconfig $DEVICE | sed -n -e 's/.*addr \([^ ]*\) */\1/p'` > > > > # Load site-specific settings > > ADDRESS="$SCHEME,$SOCKET,$INSTANCE,$HWADDR" > > start_fn () { return; } > > stop_fn () { return; } > > . $0.opts > > > > RESOLV=/etc/resolv.conf > > > > # Now, run the specific script for Wireless LAN interfaces > > # Note : we need the wireless parameters to be set up before IP > parameters, > > # so that we can perform DHCP over the Wireless link if needed. Jean II > > #if [ -x ./wireless ] ; then > > # . ./wireless > > #else > > # . /etc/pcmcia/wireless > > #fi > > > > match () { case $1 in $2) return 0; ;; *) return 1; ;; esac ; } > > bootp_setup () > > { > > if match `uname -r` "2.[2-9].*" ; then > > /sbin/ifconfig $DEVICE up > > else > > /sbin/ifconfig $DEVICE up 0.0.0.0 > > /sbin/route add default dev $DEVICE netmask 0.0.0.0 > > fi > > } > > > > case "$ACTION" in > > > > 'start') > > > > test "$IF_PORT" && /sbin/ifport $DEVICE $IF_PORT > > > > if is_true $PUMP ; then > > /sbin/pump -i $DEVICE > /dev/null > > elif is_true $BOOTP ; then > > bootp_setup > > if [ -x /sbin/bootpc ] ; then > > eval `/sbin/bootpc --bootfile '' --returniffail \ > > --timeoutwait 10 --dev $DEVICE` > > /sbin/ifconfig $DEVICE down > > if [ "$GATEWAYS" ] ; then > > set - $GATEWAYS ; GATEWAY=$1 > > fi > > elif [ -x /sbin/pump ] ; then > > /sbin/pump -i $DEVICE > /dev/null > > else > > exit 1 > > fi > > elif is_true $DHCP || is_true $DHCLIENT ; then > > bootp_setup > > HN=${DHCP_HOSTNAME:+-h $DHCP_HOSTNAME} > > if [ -x /sbin/dhcpcd ] ; then > > # This is a version check: I know it looks weird > > if /sbin/dhcpcd -XYZZY 2>&1 | grep -q DHCP ; then > > /sbin/dhcpcd -d $HN $DEVICE >/dev/null 2>&1 || exit 1 > > else > > # Jump through hoops for lame 0.70-era dhcpcd > > L=/var/run/dhcp-lock-$DEVICE > > /bin/echo "#!/bin/sh\nrm $L" > $L ; chmod +x $L > > /sbin/dhcpcd $HN -c $L $DEVICE >/dev/null 2>&1 > > for t in 0 1 2 3 4 5 6 7 8 9 ; do > > sleep 2 ; if [ ! -e $L ] ; then break ; fi > > done > > rm -f $L > > if [ -e /etc/dhcpc/resolv.conf ] ; then > > echo "# $DEVICE begin" > $RESOLV.N > > cat /etc/dhcpc/resolv.conf >> $RESOLV.N > > echo "# $DEVICE end" >> $RESOLV.N > > cat $RESOLV >> $RESOLV.N ; mv $RESOLV.N $RESOLV > > fi > > fi > > elif [ -x /sbin/dhclient ] ; then > > /sbin/dhclient $DEVICE >/dev/null 2>&1 || exit 1 > > elif [ -x /sbin/pump ] ; then > > /sbin/pump $HN -i $DEVICE > /dev/null > > else > > exit 1 > > fi > > fi > > > > if [ "$IPADDR" ] ; then > > # Basic network setup > > NM=${NETMASK:+netmask $NETMASK} > > BC=${BROADCAST:+broadcast $BROADCAST} > > MTU=${MTU:+mtu $MTU} > > /sbin/ifconfig $DEVICE up $IPADDR $NM $BC $MTU > > if [ "$NETWORK" ] ; then > > /sbin/ifuser $DEVICE $NETWORK || \ > > /sbin/route add -net $NETWORK $NM dev $DEVICE > > elif [ "$GATEWAY" ] ; then > > /sbin/ifuser $DEVICE $GATEWAY || \ > > /sbin/route add $GATEWAY $DEVICE > > fi > > test "$GATEWAY" && /sbin/route add default gw $GATEWAY metric 1 > > fi > > > > # Update DNS stuff > > if [ "$DOMAIN$SEARCH$DNSSRVS$DNS_1$DNS_2$DNS_3" ] ; then > > echo "# $DEVICE begin" > $RESOLV.N > > test "$DOMAIN" && echo "domain $DOMAIN" >> $RESOLV.N > > test "$SEARCH" && echo "search $SEARCH" >> $RESOLV.N > > for DNS in ${DNSSRVS:-$DNS_1 $DNS_2 $DNS_3} ; do > > echo "nameserver $DNS" >> $RESOLV.N > > done > > echo "# $DEVICE end" >> $RESOLV.N > > sed -e "/# $DEVICE begin/,/# $DEVICE end/d" $RESOLV >> $RESOLV.N > > mv $RESOLV.N $RESOLV > > fi > > > > # Handle NFS mounts > > if [ "$MOUNTS" ] ; then > > for MT in $MOUNTS ; do mount -v $MT ; done > > fi > > > > if [ "$IPX_NETNUM" ] ; then > > ipx_interface add $DEVICE $IPX_FRAME $IPX_NETNUM > > fi > > > > if test -x /usr/sbin/ipmasq && is_true "$IPMASQ" ; then > > /usr/sbin/ipmasq > > fi > > > > start_fn $DEVICE > > ;; > > > > 'stop') > > > > stop_fn $DEVICE > > > > if is_true $PUMP || is_true $BOOTP || is_true $DHCP \ > > || is_true $DHCLIENT || [ "$IPADDR" ] ; then > > > > # Shut down all NFS mounts on this interface > > nfsstop () > > { > > local HOST MT > > if read HOST MT ; then > > nfsstop > > if /sbin/ifuser $DEVICE $HOST ; then > > do_fuser -k -m $MT > /dev/null > > umount -v $MT > > fi > > fi > > } > > mount | fgrep 'type nfs' | sed -e 's/:.* on \(.*\) type .*/ \1/' | nfsstop > > > > test "$IPX_NETNUM" && ipx_interface del $DEVICE $IPX_FRAME > > > > # Remove nameservers > > if fgrep -q "# $DEVICE begin" $RESOLV ; then > > sed -e "/# $DEVICE begin/,/# $DEVICE end/d" $RESOLV > $RESOLV.N > > mv $RESOLV.N $RESOLV > > fi > > > > if is_true $PUMP ; then > > /sbin/pump -r -i $DEVICE > > elif is_true $DHCP ; then > > if [ -x /sbin/dhcpcd -a -f /var/run/dhcpcd-$DEVICE.pid ] ; then > > kill -TERM `cat /var/run/dhcpcd-$DEVICE.pid` > > sleep 2 > > /sbin/dhcpcd -XYZZY 2>&1 | grep -q DHCP || \ > > rm -f /var/run/dhcpcd-$DEVICE.pid > > elif [ -x /sbin/dhclient ] ; then > > kill -TERM `cat /var/run/dhclient.pid` > > elif [ -x /sbin/pump ] ; then > > /sbin/pump -r -i $DEVICE > > fi > > fi > > fi > > /sbin/ifconfig $DEVICE down > > ;; > > > > 'check') > > is_true $NO_CHECK && exit 0 > > /sbin/ifconfig $DEVICE | grep -q RUNNING || exit 0 > > > > # Check for any in-use NFS mounts > > nfscheck () > > { > > while read HOST MT ; do > > /sbin/ifuser $DEVICE $HOST && do_fuser -sm $MT && exit 1 > > done > > } > > mount | fgrep 'type nfs' | sed -e 's/:.* on \(.*\) type .*/ \1/' | > nfscheck > > > > # Check for active TCP or UDP connections > > getdests () > > { > > IFS=" :" ; read A ; read A > > while read A B C D E HOST PORT STATE ; do > > if [ "$STATE" != "FIN_WAIT1" -a "$STATE" != "FIN_WAIT2" \ > > -a "$STATE" != "CLOSE_WAIT" -a "$STATE" != "TIME_WAIT" \ > > -a "$HOST" != "127.0.0.1" -a "$HOST" != "0.0.0.0" \ > > -a "$STATE" != "CLOSE" -a "$PORT" != "*" ] ; then\ > > echo $HOST > > fi > > done > > } > > DESTS=`netstat -ntuw | getdests` > > /sbin/ifuser $DEVICE $DESTS && exit 1 > > ;; > > > > 'cksum') > > if [ $WIRELESS = 1 ] ; then exit 1 ; fi > > chk_simple "$NEW_SCHEME,$SOCKET,$INSTANCE,$HWADDR" || exit 1 > > ;; > > > > 'restart') > > test "$IPADDR" && /sbin/ifconfig $DEVICE down up > > ;; > > > > 'suspend'|'resume') > > ;; > > > > *) > > usage > > ;; > > > > esac > > > > exit 0 > > /etc/pcmcia/network.opts - file > > # NOTE: This file was generated automatically by the pcnetconfig script. > > # Network adapter configuration > > # > > # The address format is "scheme,socket,instance,hwaddr". > > # > > # Note: the "network address" here is NOT the same as the IP address. > > # See the Networking HOWTO. In short, the network address is the IP > > # address masked by the netmask. > > # > > case "$ADDRESS" in > > *,*,*,00:60:1D:*|*,*,*,00:02:2D:*) > > INFO="techorix" > > # Transceiver selection, :for some cards -- see 'man ifport' > > IF_PORT="" > > # Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n] > > BOOTP="n" > > # Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n] > > DHCP="n" > > # If you need to explicitly specify a hostname for DHCP requests > > #DHCP_HOSTNAME="" > > # Host's IP address, netmask, network address, broadcast address > > IPADDR="160.45.117.144" > > NETMASK="255.255.255.224" > > NETWORK="" > > BROADCAST="160.45.117.159" > > # Gateway address for static routing > > GATEWAY="160.45.117.129" > > # Things to add to /etc/resolv.conf for this interface > > DOMAIN="" > > SEARCH="spline.inf.fu-berlin.de inf.fu-berlin.de fu-berlin.de" > > # The nameserver IP addresses specified here complement the > > # nameservers already defined in /etc/resolv.conf. These nameservers > > # will be added to /etc/resolv.conf automatically when the PCMCIA > > # network connection is established and removed from this file when > > # the connection is broken. > > DNS_1="160.45.117.134" > > DNS_2="" > > DNS_3="" > > # NFS mounts, should be listed in /etc/fstab > > MOUNTS="" > > # If you need to override the interface's MTU... > > MTU="" > > # For IPX interfaces, the frame type and network number > > IPX_FRAME="" > > IPX_NETNUM="" > > # Run ipmasq? [y/n] (see the Debian ipmasq package) > > IPMASQ="n" > > # Extra stuff to do after setting up the interface > > start_fn () { return; } > > # Extra stuff to do before shutting down the interface > > stop_fn () { return; } > > # Card eject policy options > > NO_CHECK="n" > > NO_FUSER="n" > > ;; > > > > *,*,*,*) > > INFO="Sample private network setup for normal network pcmcia card" > > # Transceiver selection, for some cards -- see 'man ifport' > > IF_PORT="" > > # Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n] > > BOOTP="n" > > # Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n] > > DHCP="n" > > # If you need to explicitly specify a hostname for DHCP requests > > DHCP_HOSTNAME="" > > # Host's IP address, netmask, network address, broadcast address > > IPADDR="160.45.117.144" > > NETMASK="255.255.255.224" > > #NETWORK="192.168.0.0" > > BROADCAST="160.45.117.159" > > # Gateway address for static routing > > GATEWAY="160.45.117.129" > > # Things to add to /etc/resolv.conf for this interface > > DOMAIN="" > > SEARCH="" > > # The nameserver IP addresses specified here complement the > > # nameservers already defined in /etc/resolv.conf. These nameservers > > # will be added to /etc/resolv.conf automatically when the PCMCIA > > # network connection is established and removed from this file when > > # the connection is broken. > > DNS_1="160.45.117.134" > > DNS_2="" > > DNS_3="" > > # NFS mounts, should be listed in /etc/fstab > > MOUNTS="" > > # If you need to override the interface's MTU... > > MTU="" > > # For IPX interfaces, the frame type and network number > > IPX_FRAME="" > > IPX_NETNUM="" > > # Run ipmasq? [y/n] (see the Debian ipmasq package) > > IPMASQ="n" > > # Extra stuff to do after setting up the interface > > start_fn () { return; } > > # Extra stuff to do before shutting down the interface > > stop_fn () { return; } > > # Card eject policy options > > NO_CHECK="n" > > NO_FUSER="n" > > ;; > > esac > > > > # This tries to use Debian's network setup in /etc/network/interfaces > > # if no settings are given higher up in this file. You can delete it > > # if that isn't desired. > > > > #is_true $PUMP || is_true $BOOTP || is_true $DHCP || is_true $DHCLIENT || > \ > > #if [ ! "$IPADDR" -a -f /etc/network/interfaces ] ; then > > #INFO="Debian network setup" > > #start_fn () { > > #log /sbin/ifup $1 > > #} > > #stop_fn () { > > #log /sbin/ifdown $1 > > #} > > #fi > > /etc/pcmcia/config.opts - file > > # > > # Local PCMCIA Configuration File > > # > > #---------------------------------------------------------------------- > > > > # System resources available for PCMCIA devices > > > > include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff > > include memory 0xc0000-0xfffff > > include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff > > > > # High port numbers do not always work... > > # include port 0x1000-0x17ff > > > > # Extra port range for IBM Token Ring > > include port 0xa00-0xaff > > > > # Resources we should not use, even if they appear to be available > > > > # First built-in serial port > > exclude irq 4 > > # Second built-in serial port > > #exclude irq 3 > > # First built-in parallel port > > exclude irq 7 > > > > #---------------------------------------------------------------------- > > > > # Examples of options for loadable modules > > > > # To fix sluggish network with IBM ethernet adapter... > > #module "pcnet_cs" opts "mem_speed=600" > > > > # Options for IBM Token Ring adapters > > #module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000" > > > > # Options for Raylink/WebGear driver: uncomment only one line... > > # Generic ad-hoc network > > module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 > translate=1" > > # Infrastructure network for older cards > > #module "ray_cs" opts "net_type=1 essid=ESSID1" > > # Infrastructure network for WebGear > > #module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 > beacon_period=256" > > > > # Options for WaveLAN/IEEE driver (AccessPoint mode)... > > #module "wvlan_cs" opts "station_name=MY_PC" > > # Options for WaveLAN/IEEE driver (ad-hoc mode)... > > #module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC" > > > > # Options for Xircom Netwave driver... > > #module "netwave_cs" opts "domain=0x100 scramble_key=0x0" > > > > /etc/pcmcia/config - file > > # > > # PCMCIA Card Configuration Database > > # > > # config 1.145 2000/11/07 21:20:05 (David Hinds) > > # > > > > # config.opts is now included at the very end > > > > # > > # Device driver definitions > > # > > device "3c589_cs" > > class "network" module "3c589_cs" > > > > device "ibmtr_cs" > > class "network" module "ibmtr_cs" > > > > device "nmclan_cs" > > class "network" module "nmclan_cs" > > > > device "oti12_cs" > > class "cdrom" module "oti12_cs" > > > > # Debian note: module 8390.o has been moved from the net subdirectory > > # to the pcmcia subdirectory > > device "pcnet_cs" > > class "network" module "8390", "pcnet_cs" > > > > device "smc91c92_cs" > > class "network" module "smc91c92_cs" > > > > device "wavelan_cs" > > class "network" module "wavelan_cs" > > > > device "wvlan_cs" > > class "network" module "wvlan_cs" > > > > device "memory_cs" needs_mtd > > class "memory" module "memory_cs" > > > > device "ftl_cs" needs_mtd > > class "ftl" module "ftl_cs" > > > > device "serial_cs" > > class "serial" module "serial_cs" > > > > device "parport_cs" > > class "parport" module "parport_cs" > > > > device "qlogic_cs" > > class "scsi" module "qlogic_cs" > > > > device "aha152x_cs" > > class "scsi" module "aha152x_cs" > > > > device "fdomain_cs" > > class "scsi" module "fdomain_cs" > > > > device "sym53c500_cs" > > class "scsi" module "sym53c500_cs" > > > > device "ide_cs" > > class "ide" module "ide_cs" > > > > device "fmvj18x_cs" > > class "network" module "fmvj18x_cs" > > > > device "netwave_cs" > > class "network" module "netwave_cs" > > > > device "xirc2ps_cs" > > class "network" module "xirc2ps_cs" > > > > device "iscc_cs" > > class "iscc" module "iscc_cs" > > > > device "3c574_cs" > > class "network" module "3c574_cs" > > > > device "teles_cs" > > class "teles" module "teles_cs" > > > > device "3c575_cb" > > class "network" module "cb_enabler", "3c575_cb" > > > > device "apa1480_cb" > > class "scsi" module "cb_enabler", "apa1480_cb" > > > > device "tulip_cb" > > class "network" module "cb_enabler", "tulip_cb" > > > > device "memory_cb" > > class "memory" module "cb_enabler", "memory_cb" > > > > device "epic_cb" > > class "network" module "cb_enabler", "epic_cb" > > > > device "eepro100_cb" > > class "network" module "cb_enabler", "eepro100_cb" > > > > device "serial_cb" > > class "serial" module "cb_enabler", "serial_cb" > > > > device "ray_cs" > > class "network" module "ray_cs" > > > > device "airo_cs" > > class "network" module "airo", "airo_cs" > > > > device "pcilynx_cb" > > class "ieee1394" module "cb_enabler", "pcilynx_cb" > > > > # > > # Ethernet adapter definitions > > # > > card "2412LAN Ethernet" > > version "2412LAN" > > bind "pcnet_cs" > > > > card "3Com 589 Ethernet" > > manfid 0x0101, 0x0589 > > bind "3c589_cs" > > > > card "Access/CARD Ethernet" > > version "UBKK,V2.0" > > bind "fmvj18x_cs" > > > > card "Accton EN2212 Ethernet" > > version "ACCTON", "EN2212" > > bind "pcnet_cs" > > > > card "Accton EN2216 Ethernet" > > version "ACCTON", "EN2216-PCMCIA-ETHERNET" > > bind "pcnet_cs" > > > > card "Accton UE2212 Ethernet" > > version "PCMCIA", "UE2212" > > bind "pcnet_cs" > > > > card "Accton UE2216 Ethernet" > > version "PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216" > > bind "pcnet_cs" > > > > card "Allied Telesis LA-PCM Ethernet" > > manfid 0xc00f, 0x0002 > > cis "cis/LA-PCM.dat" > > bind "pcnet_cs" > > > > card "AmbiCom AMB8002 Ethernet" > > version "AmbiCom Inc", "AMB8002" > > bind "pcnet_cs" > > > > card "AmbiCom AMB8002T Ethernet" > > version "AmbiCom Inc", "AMB8002T" > > bind "pcnet_cs" > > > > card "AmbiCom AMB8010 Ethernet" > > version "AmbiCom Inc", "AMB8010" > > bind "pcnet_cs" > > > > card "AnyCom ECO Ethernet" > > version "AnyCom", "ECO Ethernet" > > bind "pcnet_cs" > > > > card "Argosy EN210 Ethernet" > > version "PCMCIA LAN", "Ethernet" > > bind "pcnet_cs" > > > > card "Asante FriendlyNet Ethernet" > > version "ASANTE", "FriendlyNet PC Card" > > bind "pcnet_cs" > > > > card "Billionton LNT-10TB" > > version "Billionton", "LNT-10TB" > > bind "pcnet_cs" > > > > card "Billionton LNT-10TN" > > version "PCMCIA", "LNT-10TN" > > bind "pcnet_cs" > > > > card "California Access Ethernet" > > version "PCMCIAs", "ComboCard" > > bind "pcnet_cs" > > > > card "CeLAN Ethernet" > > version "PCMCIA", "ETHERNET V1.0" > > bind "pcnet_cs" > > > > card "CentreCOM LA-PCM V2 Ethernet" > > version "Allied Telesis, K.K.", "CentreCOM LA-PCM_V2" > > bind "pcnet_cs" > > > > card "CNet CN30BC Ethernet" > > version "CNet ", "CN30BC", "ETHERNET" > > bind "pcnet_cs" > > > > card "CNet CN40BC Ethernet" > > version "CNet", "CN40BC Ethernet" > > bind "pcnet_cs" > > > > card "Compaq Ethernet" > > version "Compaq", "Ethernet LAN Card" > > bind "xirc2ps_cs" > > > > card "Compaq Netelligent 10/100 Ethernet" > > version "Compaq", "Netelligent 10/100 PC Card" > > bind "xirc2ps_cs" > > > > card "COMPU-SHACK BASEline Ethernet" > > version "COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter" > > bind "pcnet_cs" > > > > card "Connectware LANdingGear Ethernet" > > manfid 0x0057, 0x1004 > > bind "pcnet_cs" > > > > card "CONTEC Ethernet" > > version "CONTEC Co.,Ltd." > > bind "fmvj18x_cs" > > > > card "Corega PCC-T Ethernet" > > version "corega K.K.", "corega Ether PCC-T" > > bind "pcnet_cs" > > > > card "Corega PCC-T Ethernet" > > version "corega K.K.", "corega EtherII PCC-T" > > bind "pcnet_cs" > > > > card "Corega PCC-T EthernetII" > > version "corega K.K.", "corega EtherII PCC-T" > > bind "pcnet_cs" > > > > card "Corega PCC-T Ethernet" > > version "corega,K.K.", "Ethernet LAN Card" > > bind "pcnet_cs" > > > > card "Corega PCM-T Ethernet" > > version "Corega,K.K.", "Ethernet LAN Card" > > bind "pcnet_cs" > > > > card "CyQ've 10baseT Ethernet" > > version "CyQ've 10 Base-T LAN CARD" > > bind "pcnet_cs" > > > > card "CyQ've ELA-010 Ethernet" > > version "CyQ've", "ELA-010" > > bind "pcnet_cs" > > > > card "Danpex EN-6200P2 Ethernet" > > version "*", "EN-6200P2" > > bind "pcnet_cs" > > > > card "DataTrek NetCard Ethernet" > > version "DataTrek.", "NetCard " > > bind "pcnet_cs" > > > > card "Dayna Commnunications CommuniCard E Ethernet" > > version "Dayna Communications, Inc.", "CommuniCard E" > > bind "pcnet_cs" > > > > card "Digital DEPCM-BA Ethernet" > > version "DIGITAL", "DEPCM-XX" > > bind "pcnet_cs" > > > > card "Digital PCP78-AC Ethernet" > > version "Digital", "Ethernet", "Adapter" > > bind "pcnet_cs" > > > > card "D-Link DE-650 Ethernet" > > version "D-Link", "DE-650" > > bind "pcnet_cs" > > > > card "D-Link DFE-650 Ethernet" > > version "D-Link", "DFE-650" > > bind "pcnet_cs" > > > > card "D-Link DE-660 Ethernet" > > version "D-Link", "DE-660" > > bind "pcnet_cs" > > > > card "D-Link DE-660+ Ethernet" > > version "D-Link", "DE-660+" > > bind "pcnet_cs" > > > > card "D-Link DE-650 Ethernet" > > tuple 0x40, 0x0009, "D-Link PC Ethernet Card" > > bind "pcnet_cs" > > > > card "DynaLink L10C Ethernet" > > version "DYNALINK", "L10C" > > bind "pcnet_cs" > > > > card "E2000 NE2000-Compatible Ethernet" > > version "Ethernet Adapter", "E2000 PCMCIA Ethernet" > > bind "pcnet_cs" > > > > card "Eagle NE200 Ethernet" > > manfid 0x0004, 0x0004 > > bind "fmvj18x_cs" > > > > card "Edimax Ethernet Combo" > > version "Edimax Technology Inc.", "PCMCIA", "Ethernet Card" > > bind "pcnet_cs" > > > > card "EFA 207 Ethernet" > > version "EFA ", "EFA207", "ETHERNET" > > bind "pcnet_cs" > > > > card "Eiger Labs EPX-ET10T2 Ethernet" > > version "EIGER Labs Inc.", "Ethernet Combo card" > > bind "pcnet_cs" > > > > card "Eiger Labs EPX-ET10BT Ethernet" > > version "EIGER Labs Inc.", "Ethernet 10BaseT card" > > bind "pcnet_cs" > > > > card "Eiger Labs EPX-10BT Ethernet" > > version "Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT" > > bind "fmvj18x_cs" > > > > card "Eiger Labs EPX-ET 10BT Ethernet" > > version "Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT" > > bind "fmvj18x_cs" > > > > card "ELECOM Laneed LD-CDF" > > version "Laneed", "LD-CDF" > > bind "pcnet_cs" > > > > card "EZLink 4109 Ethernet" > > version "PCMCIA", "Ethernet Card" > > bind "pcnet_cs" > > > > card "EP-210 Ethernet" > > version "Ethernet PCMCIA adapter", "EP-210" > > bind "pcnet_cs" > > > > card "EP-210 Ethernet" > > version "EP-210 PCMCIA LAN CARD." > > bind "pcnet_cs" > > > > card "EP-220 Ethernet" > > version "PCMCIA", "ETHERNET" > > bind "pcnet_cs" > > > > card "Epson EEN10B Ethernet" > > version "Seiko Epson Corp.", "Ethernet" > > bind "pcnet_cs" > > > > card "Farallon ENet" > > version "Farallon", "ENet" > > bind "3c589_cs" > > > > card "Fujitsu FMV-J181 Ethernet" > > version "PCMCIA MBH10302" > > bind "fmvj18x_cs" > > > > card "Fujitsu FMV-1080 Ethernet" > > version "FUJITSU", "MBH10308" > > bind "fmvj18x_cs" > > > > card "Fujitsu FMV-J182 Ethernet" > > version "FUJITSU", "LAN Card(FMV-J182)" > > bind "fmvj18x_cs" > > > > card "Fujitsu Towa LA501 Ethernet" > > version "FUJITSU TOWA", "LA501" > > bind "fmvj18x_cs" > > > > card "Grey Cell GCS2000 Ethernet" > > version "Grey Cell", "GCS2000" > > bind "pcnet_cs" > > > > card "Grey Cell GCS2220 Ethernet" > > version "Grey Cell", "GCS2220" > > bind "pcnet_cs" > > > > card "GVC NIC-2000P Ethernet" > > version "GVC", "NIC-2000p" > > bind "pcnet_cs" > > > > card "GVC NIC-2000P Ethernet" > > version "PCMCIA", "Ethernet Combo card" > > bind "pcnet_cs" > > > > card "Hitachi HT-4840-11 Ethernet" > > version "HITACHI", "HT-4840-11" > > bind "fmvj18x_cs" > > > > card "Hypertec EP401 Ethernet" > > version "Hypertec", "*", "EP401" > > bind "pcnet_cs" > > > > card "IBM Credit Card Ethernet" > > version "IBM Corp.", "Ethernet" > > bind "pcnet_cs" > > > > card "IC-Card Ethernet" > > version "IC-CARD", "IC-CARD" > > bind "pcnet_cs" > > > > card "IC-Card Plus Ethernet" > > version "IC-CARD+", "IC-CARD+" > > bind "pcnet_cs" > > > > card "Kansai KLA-PCM/T Ethernet" > > version "KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T" > > bind "pcnet_cs" > > > > card "Katron PE-520 Ethernet" > > version "KCI", "PE520 PCMCIA Ethernet Adapter" > > bind "pcnet_cs" > > > > card "KingMax Technology Ethernet" > > version "KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card" > > bind "pcnet_cs" > > > > card "KingMax Technology Ethernet" > > version "KingMax Technology Inc.", "*", "Ethernet Card" > > bind "pcnet_cs" > > > > card "KingMax Technology Ethernet" > > version "KINGMAX", "EN10T2T" > > bind "pcnet_cs" > > > > card "Kingston KNE-PCM/x Ethernet" > > version "Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter" > > bind "pcnet_cs" > > > > card "Kingston KNE-PC2 Ethernet" > > version "Kingston", "KNE-PC2" > > bind "pcnet_cs" > > > > card "KTI PE-520 Plus Ethernet" > > version "KTI", "PE520 PLUS" > > cis "cis/PE520.dat" > > bind "pcnet_cs" > > > > card "Linksys Ethernet" > > tuple 0x40, 0x0009, "E-CARD PC Ethernet Card" > > cis "cis/E-CARD.dat" > > bind "pcnet_cs" > > > > card "Linksys Ethernet" > > version "LINKSYS", "E-CARD" > > bind "pcnet_cs" > > > > card "Linksys Ethernet" > > version "E-CARD", "E-CARD" > > bind "pcnet_cs" > > > > card "Linksys Ethernet" > > version "Linksys", "Combo PCMCIA EthernetCard (EC2T)" > > bind "pcnet_cs" > > > > card "Longshine ShineNet LCS-8534 Ethernet" > > version "LONGSHINE", "PCMCIA Ethernet Card" > > bind "pcnet_cs" > > > > card "Longshine ShineNet LCS-8534 Ethernet" > > version "LONGSHINE", "*", "EP401" > > bind "pcnet_cs" > > > > card "Logitec LPM-LN10BA Ethernet" > > version "Cardwell", "PCMCIA", "ETHERNET" > > bind "pcnet_cs" > > > > card "Logitec LPM-LN20T Ethernet" > > version "Logitec", "LPM-LN20T" > > bind "pcnet_cs" > > > > card "MACNICA Ethernet" > > version "MACNICA", "ME1-JEIDA" > > bind "pcnet_cs" > > > > card "Maxtech PCN2000 Ethernet" > > version "MAXTECH", "PCN2000" > > bind "pcnet_cs" > > > > card "Megahertz CC10BT/2 Ethernet" > > version "Megahertz", "CC10BT/2" > > bind "smc91c92_cs" > > > > card "Melco LPC2-T Ethernet" > > manfid 0x01bf, 0x2216 > > bind "pcnet_cs" > > > > card "Microdyne NE4200 Ethernet" > > version "Microdyne", "NE4200" > > bind "pcnet_cs" > > > > card "Midori LT-PCMT Ethernet" > > version "MIDORI ELEC.", "LT-PCMT" > > bind "pcnet_cs" > > > > card "National Semiconductor InfoMover 4100 Ethernet" > > version "National Semiconductor", "InfoMover 4100" > > bind "pcnet_cs" > > > > card "National Semiconductor InfoMover NE4100 Ethernet" > > version "National Semiconductor", "InfoMover NE4100" > > bind "pcnet_cs" > > > > card "NEC PC-9801N-J12 Ethernet" > > version "NEC", "PC-9801N-J12" > > bind "pcnet_cs" > > > > card "New Media Ethernet" > > version "New Media Corporation", "Ethernet" > > bind "nmclan_cs" > > > > card "New Media BASICS Ethernet" > > version "BASICS by New Media Corporation", "Ethernet", "SMC91C94" > > bind "smc91c92_cs" > > > > card "New Media LanSurfer" > > manfid 0x0057, 0x0021 > > bind "pcnet_cs" > > > > card "NextCom NC5310 Ethernet" > > version "NextComK.K.", "NC5310 Ver1.0 " > > bind "fmvj18x_cs" > > > > card "NE2000 Compatible Ethernet" > > version "PCMCIA", "Ethernet" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Ethernet" > > version "PCMCIA", "Ethernet 10BaseT Card" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Ethernet" > > version "NE2000 Compatible" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Ethernet" > > version "Ethernet", "Adapter" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Ethernet" > > version "PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Ethernet" > > manfid 0x0149, 0xc1ab > > bind "pcnet_cs" > > > > card "NDC Instant-Link Ethernet" > > version "NDC", "Ethernet" > > cis "cis/NE2K.dat" > > bind "pcnet_cs" > > > > card "Novell Eagle 200T Ethernet" > > version "EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04" > > bind "fmvj18x_cs" > > > > card "Ositech Four of Diamonds Ethernet" > > version "Ositech", "Trumpcard:Four of Diamonds Ethernet" > > bind "smc91c92_cs" > > > > card "IO DATA PCLA/T Ethernet" > > version "I-O DATA", "PCLA", "ETHERNET" > > bind "pcnet_cs" > > > > card "IO DATA PCLA/TE Ethernet" > > version "IO DATA", "PCLATE", "ETHERNET" > > bind "pcnet_cs" > > > > card "Panasonic CF-VEL211 Ethernet" > > version "Matsushita Electric Industrial Co.,LTD.", "CF-VEL211" > > bind "pcnet_cs" > > > > card "Portable Add-ons Ethernet+" > > version "Portable Add-ons", "Ethernet+" > > bind "nmclan_cs" > > > > card "PreMax PE-200 Ethernet" > > version "PMX ", "PE-200" > > cis "cis/PE-200.dat" > > bind "pcnet_cs" > > > > card "PRETEC CompactLAN Ethernet" > > version "PRETEC", "Ethernet CompactLAN 10baseT 3.3V" > > bind "pcnet_cs" > > > > card "Psion Gold Card Ethernet" > > version "Psion Dacom", "Gold Card Ethernet" > > bind "pcnet_cs" > > > > card "Psion Gold Card Netglobal Ethernet" > > version "Psion", "10Mb Ethernet" > > bind "smc91c92_cs" > > > > card "RATOC Ethernet" > > version "PCMCIA LAN MBH10304 ES" > > bind "fmvj18x_cs" > > > > card "RATOC REX-R280 Ethernet" > > version "RATOC System Inc.", "10BASE_T CARD R280" > > bind "fmvj18x_cs" > > > > card "Relia RE2408T Ethernet" > > version "PCMCIA LAN", "Ethernet" > > bind "pcnet_cs" > > > > card "Reliasys 2400A Ethernet" > > version "=RELIA==", "Ethernet" > > bind "pcnet_cs" > > > > card "RPTI EP400 Ethernet" > > version "RPTI LTD.", "EP400" > > bind "pcnet_cs" > > > > card "RPTI EP400 Ethernet" > > version "RPTI", "EP400 Ethernet NE2000 Compatible" > > bind "pcnet_cs" > > > > card "RPTI EP401 Ethernet" > > version "RPTI", "EP401 Ethernet NE2000 Compatible" > > bind "pcnet_cs" > > > > card "RPTI 1625B Ethernet" > > version "RP", "1625B Ethernet NE2000 Compatible" > > bind "pcnet_cs" > > > > card "SCM Ethernet Combo" > > version "SCM", "Ethernet Combo card" > > bind "pcnet_cs" > > > > card "Sky Link Express" > > version "2408LAN", "Ethernet" > > bind "pcnet_cs" > > > > card "SMC EtherEZ Ethernet" > > version "SMC", "EtherEZ Ethernet 8020" > > bind "smc91c92_cs" > > > > card "SMC EZCard-10 Ethernet" > > version "SMC", "EZCard-10-PCMCIA" > > bind "pcnet_cs" > > > > card "Socket EA Ethernet" > > version "Socket Communications Inc", > > "Socket EA PCMCIA LAN Adapter Revision D" > > bind "pcnet_cs" > > > > card "Socket EA Ethernet" > > version "Socket Communications Inc", > > "Socket EA PCMCIA LAN Adapter Revision E" > > bind "pcnet_cs" > > > > card "Socket LP-E Ethernet" > > manfid 0x0104, 0x000d > > bind "pcnet_cs" > > > > card "Socket LP-E CF+ Ethernet" > > manfid 0x0104, 0x0075 > > bind "pcnet_cs" > > > > card "SuperSocket Ethernet" > > version "Telecom Device K.K.", "SuperSocket RE450T" > > bind "pcnet_cs" > > > > card "Surecom Ethernet" > > version "TAMARACK", "Ethernet" > > cis "cis/tamarack.dat" > > bind "pcnet_cs" > > > > card "TDK LAC-CD02x Ethernet" > > version "TDK", "LAC-CD02x" > > bind "fmvj18x_cs" > > > > card "Xircom IIps Ethernet" > > version "Xircom", "*", "PS-CE2-10" > > bind "xirc2ps_cs" > > > > card "Xircom RE-10 Ethernet" > > version "Xircom", "*", "RE-10" > > bind "xirc2ps_cs" > > > > # > > # 10/100baseT network adapters > > # > > card "3Com 572/574 Fast Ethernet" > > manfid 0x0101, 0x0574 > > bind "3c574_cs" > > > > card "Abocom LinkMate FE1000 Fast Ethernet" > > version "Fast Ethernet", "Adapter" > > bind "pcnet_cs" > > > > card "Accton Fast EtherCard-16" > > manfid 0x01bf, 0x010a > > bind "xirc2ps_cs" > > > > card "AmbiCom AMB8110 Fast Ethernet" > > manfid 0x021b, 0x0202 > > bind "pcnet_cs" > > > > card "AnyCom ECO 10/100 Fast Ethernet" > > version "AnyCom", "ECO Ethernet 10/100" > > bind "pcnet_cs" > > > > card "Argosy EN220 Fast Ethernet" > > version "ARGOSY", "Fast Ethernet PCCard" > > bind "smc91c92_cs" > > > > card "Buffalo LPC3-CLX Fast Ethernet" > > manfid 0x026f, 0x0301 > > bind "pcnet_cs" > > > > card "COMPU-SHACK FASTline 10/100 Fast Ethernet" > > version "COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet" > > bind "pcnet_cs" > > > > card "Corega PCC-TX Fast Ethernet" > > version "corega K.K.", "corega FastEther PCC-TX" > > bind "pcnet_cs" > > > > card "D-Link Fast Ethernet" > > version "ETHER-C16" > > bind "pcnet_cs" > > > > card "Dynalink L100C Fast Ethernet" > > version "DYNALINK", "L100C" > > bind "smc91c92_cs" > > > > card "EXP ThinLan-110 Fast Ethernet" > > version "PCMCIA", "Fast Ethernet PCCard" > > bind "smc91c92_cs" > > > > card "Farallon Enet" > > version "Farallon", "Farallon Enet" > > bind "smc91c92_cs" > > > > card "Intel EtherExpress PRO/100" > > version "Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16" > > bind "xirc2ps_cs" > > > > card "IO DATA PCET/TX Fast Ethernet" > > version "IO DATA", "PCETTX" > > bind "pcnet_cs" > > > > card "Laneed LD-10/100CD Fast Ethernet" > > version "Laneed", "LD-10/100CD" > > bind "pcnet_cs" > > > > card "Level One 10/100 Fast Ethernet" > > version "Dual Speed", "10/100 PC Card" > > bind "pcnet_cs" > > > > card "Linksys EtherFast 10/100 Fast Ethernet" > > version "Linksys", "EtherFast 10/100 PC Card (PCMPC100)" > > bind "pcnet_cs" > > > > card "Logitec LPM-LN100TX Fast Ethernet" > > version "Logitec", "LPM-LN100TX" > > bind "pcnet_cs" > > > > card "Melco LPC2-TX Fast Ethernet" > > version "MELCO", "LPC2-TX" > > bind "pcnet_cs" > > > > card "Melco/SMC LPC-TX Fast Ethernet" > > version "MELCO/SMC", "LPC-TX" > > bind "smc91c92_cs" > > > > card "Microcom C.E. Travel Card 10/100 Fast Ethernet" > > version "Microcom C.E.", "Travel Card LAN 10/100" > > bind "pcnet_cs" > > > > card "NetGear FA410TXC Fast Ethernet" > > version "NETGEAR", "FA410TX" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Fast Ethernet" > > manfid 0x0149, 0x0230 > > bind "pcnet_cs" > > > > card "NE2000 Compatible Fast Ethernet" > > version "PCMCIA", "10/100 Ethernet Card" > > bind "pcnet_cs" > > > > card "NE2000 Compatible Fast Ethernet" > > version "PCMCIA", "FAST ETHERNET CARD" > > bind "pcnet_cs" > > > > card "Ositech Seven of Diamonds Fast Ethernet" > > version "Ositech", "Trumpcard:Seven of Diamonds Ethernet" > > bind "smc91c92_cs" > > > > card "Planex FNW-3600T Fast Ethernet" > > version "Fast Ethernet", "Adapter" > > bind "pcnet_cs" > > > > card "Psion Gold Card NetGlobal 10/100 Fast Ethernet" > > manfid 0x016c, 0x0023 > > bind "smc91c92_cs" > > > > card "Toshiba Advanced Network Fast Ethernet" > > version "Toshiba Information Systems", "*", "TPCENET" > > bind "xirc2ps_cs" > > > > card "Toshiba 10/100 Fast Ethernet" > > version "Toshiba", "10/100 Ethernet PC Card" > > bind "xirc2ps_cs" > > > > # These conflict with other cards! > > #card "WiseCom WC-PC400 Fast Ethernet" > > # manfid 0x0186, 0x0100 > > # bind "smc91c92_cs" > > #card "WiseCom WC-PC400 Fast Ethernet" > > # manfid 0x8a01, 0xc1ab > > # bind "smc91c92_cs" > > > > card "Xircom CE3-10/100 Fast Ethernet" > > version "Xircom", "*", "CE3-10/100" > > bind "xirc2ps_cs" > > > > card "Xircom RealPort2 10/100 Fast Ethernet" > > version "Xircom", "*", "R2E-100BTX" > > bind "xirc2ps_cs" > > > > card "Xircom XE2000 10/100 Fast Ethernet" > > manfid 0x0105, 0x010a > > bind "xirc2ps_cs" > > > > # > > # Wireless network adapters > > # > > card "Aironet PC4500" > > manfid 0x015f, 0x0005 > > bind "airo_cs" > > > > card "Aironet PC4800" > > manfid 0x015f, 0x0007 > > bind "airo_cs" > > > > card "AT&T WaveLAN Adapter" > > version "AT&T", "WaveLAN/PCMCIA" > > bind "wavelan_cs" > > > > card "Cabletron RoamAbout 802.11 DS" > > version "Cabletron", "RoamAbout 802.11 DS" > > bind "wvlan_cs" > > > > card "Digital RoamAbout/DS" > > version "Digital", "RoamAbout/DS" > > bind "wavelan_cs" > > > > card "ELSA AirLancer MC-11" > > version "ELSA", "AirLancer MC-11" > > bind "wvlan_cs" > > > > card "Lucent Technologies WaveLAN Adapter" > > version "Lucent Technologies", "WaveLAN/PCMCIA" > > bind "wavelan_cs" > > > > card "D-Link DWL-650 11 Mbps Wireless Adapter" > > manfid 0x0156, 0x0002 > > bind "wvlan_cs" > > > > card "Lucent Technologies WaveLAN/IEEE Adapter" > > version "Lucent Technologies", "WaveLAN/IEEE" > > bind "wavelan_cs" > > > > card "MELCO WLI-PCM-L11" > > version "MELCO", "WLI-PCM-L11" > > bind "wvlan_cs" > > > > card "NCR WaveLAN Adapter" > > version "NCR", "WaveLAN/PCMCIA" > > bind "wavelan_cs" > > > > card "NCR WaveLAN/IEEE Adapter" > > version "NCR", "WaveLAN/IEEE" > > bind "wvlan_cs" > > > > card "ELSA AirLancer MC-11" > > version "ELSA", "AirLancer MC-11" > > bind "wvlan_cs" > > > > card "RayLink PC Card WLAN Adapter" > > manfid 0x01a6, 0x0000 > > bind "ray_cs" > > > > card "Xircom CreditCard Netwave" > > version "Xircom", "CreditCard Netwave" > > bind "netwave_cs" > > > > # > > # Modems and other serial devices > > # > > # NOTE: most modems do not need explicit entries here, because they > > # are correctly identified using the following generic entry. > > # > > card "Serial or Modem" > > function serial_port > > bind "serial_cs" > > > > card "3Com 3CCM156 56K Global Modem" > > manfid 0x0101, 0x0039 > > bind "serial_cs" > > > > card "Angia Fax/Modem" > > version "Intelligent", "ANGIA FAX/MODEM" > > bind "serial_cs" > > > > card "Bullet V.34 28.8K Modem" > > version "OEM ", "C288MX " > > bind "serial_cs" > > > > card "Cirrus Logic 14.4K Fax Modem" > > version "CIRRUS LOGIC", "FAX MODEM" > > bind "serial_cs" > > > > card "Compaq 28.8K Modem" > > version "COMPAQ", "PCMCIA 28800 FAX/DATA MODEM" > > bind "serial_cs" > > > > card "Compaq 33.6K Modem" > > version "COMPAQ", "PCMCIA 33600 FAX/DATA MODEM" > > bind "serial_cs" > > > > card "Dr. Neuhaus 14.4K FURY Card" > > version "Dr. Neuhaus", "FURY CARD 14K4" > > bind "serial_cs" > > > > card "E.TECH Bullet 33.6K Modem" > > version "PCMCIA ", "C336MX " > > bind "serial_cs" > > > > card "Gateway 2000 TelePath Fax Modem" > > version "GATEWAY2000", "CC3144", "*", "PCMCIA MODEM" > > bind "serial_cs" > > > > card "Intel-compatible Modem" > > version "Intel", "MODEM 2400+" > > bind "serial_cs" > > > > card "Macronix Fax/Modem" > > version "MACRONIX", "FAX/MODEM" > > bind "serial_cs" > > > > card "Megahertz PCMCIA Modem" > > version "MEGAHERTZ", "*", "*", "PCMCIA MODEM" > > bind "serial_cs" > > > > card "Megahertz V.34 Modem" > > version "MEGAHERTZ", "*", "V.34 PCMCIA MODEM" > > bind "serial_cs" > > > > card "MultiTech MultiModem" > > version "Multi-Tech", "MT1432LT" > > bind "serial_cs" > > > > card "MultiTech V.34 Modem" > > version "Multi-Tech", "MT2834LT" > > bind "serial_cs" > > > > card "MultiTech MT5634ZLX" > > version "MultiTech", "PCMCIA 56K DataFax" > > cis "cis/MT5634ZLX.dat" > > bind "serial_cs" > > > > card "Toshiba T144PF Modem" > > version "TOSHIBA", "T144PF", "*", "PCMCIA MODEM" > > bind "serial_cs" > > > > card "Advantech COMpad-32/85" > > version "ADVANTECH", "COMpad-32/85", "1.0" > > cis "cis/COMpad2.dat" > > bind "serial_cs" > > > > card "Advantech COMpad-32/85B-4" > > version "ADVANTECH", "COMpad-32/85B-4" > > cis "cis/COMpad4.dat" > > bind "serial_cs" > > > > card "Advantech COMpad-32/85" > > version "ADV", "*", "TECH", "COMpad-32/85" > > bind "serial_cs" > > > > card "Argosy Dual Serial I/O" > > version "*", "RS-COM 2P" > > cis "cis/RS-COM-2P.dat" > > bind "serial_cs" > > > > card "Brain Boxes 2-Port RS-232" > > manfid 0x0160, 0x0002 > > bind "serial_cs" to 0, "serial_cs" to 1 > > > > card "Computerboards PCM-COM422" > > version "Computerboards, Inc.", "PCM-COM422" > > bind "serial_cs" > > > > card "Fujitsu FMV-JMD711" > > version "FUJITSU", "FC14F ", "MBH10213" > > bind "serial_cs" > > > > card "IOTech Dual RS-232" > > version "IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card" > > bind "serial_cs" > > > > card "National Instruments PCMCIA-232" > > manfid 0x10b, 0x0d50 > > bind "serial_cs" > > > > card "National Instruments PCMCIA-232/2" > > manfid 0x10b, 0x0d51 > > bind "serial_cs" > > > > card "National Instruments PCMCIA-485" > > manfid 0x10b, 0x0d52 > > bind "serial_cs" > > > > card "National Instruments PCMCIA-485/2" > > manfid 0x10b, 0x0d53 > > bind "serial_cs" > > > > card "National Instruments PCMCIA-232/4" > > manfid 0x10b, 0xd180 > > bind "serial_cs" > > > > card "Omega Engineering QSP-100" > > manfid 0x0137, 0x0025 > > bind "serial_cs" > > > > card "Quatech Dual RS-232" > > version "Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card" > > bind "serial_cs" > > > > card "Quatech Quad RS-232" > > manfid 0x0137, 0x001b > > bind "serial_cs" > > > > card "Silicom 2S100 Dual Serial" > > manfid 0x0089, 0x0301 > > bind "serial_cs" > > > > card "Socket Communications Dual RS-232" > > manfid 0x0104, 0x0006 > > bind "serial_cs" > > > > card "Socket Communications Dual I/O Card" > > manfid 0x0104, 0x0070 > > bind "serial_cs" to 0, "serial_cs" to 1 > > > > # > > # Memory cards > > # > > card "Anonymous Memory" > > anonymous > > bind "memory_cs" > > > > card "Memory Card" > > function memory_card > > bind "memory_cs" > > > > card "IBM 2MB SRAM" > > version "IBM", "2MB SRAM" > > bind "memory_cs" > > > > card "IBM 4MB Series 1 Flash" > > version "IBM", "4MB FLASH" > > bind "memory_cs", "ftl_cs" > > > > card "IBM 8MB Series 2 Flash" > > version "IBM", "8MB FLASH" > > bind "memory_cs", "ftl_cs" > > > > card "Intel Series 2 2MB Flash" > > version "intel", "SERIES2-02 " > > bind "memory_cs", "ftl_cs" > > > > card "Intel Series 2 4MB Flash" > > version "intel", "SERIES2-04 " > > bind "memory_cs", "ftl_cs" > > > > card "Intel Series 2 20MB Flash" > > version "intel", "SERIES2-20 " > > bind "memory_cs", "ftl_cs" > > > > card "Intel Series 2+ 8MB Flash" > > version "Intel", "S2E8 SW" > > bind "memory_cs", "ftl_cs" > > > > card "Intel Series 2+ 20MB Flash" > > version "Intel", "S2E20SW" > > bind "memory_cs", "ftl_cs" > > > > card "Intel Series 100 Flash" > > version "intel", "VALUE SERIES 100 " > > bind "memory_cs", "ftl_cs" > > > > card "IO DATA 2MB SRAM" > > version "IO DATA", "PCS-2M", "2MB SRAM" > > bind "memory_cs" > > > > card "Maxtor MobileMax Flash" > > version "Maxtor", "MAXFL MobileMax Flash Memory Card" > > bind "memory_cs", "ftl_cs" > > > > card "Seiko/Epson WWB101EN20" > > version "SEIKO EPSON", "WWB101EN20" > > bind "memory_cs" > > > > card "Seiko/Epson WWB513EN20" > > version "SEIKO EPSON", "WWB513EN20" > > bind "memory_cs" > > > > card "Franklink/Rolodex REX-3000" > > version "Starfish, Inc.", "REX-3000" > > bind "memory_cs" > > > > card "Franklink/Rolodex REX-4100" > > version "Starfish, Inc.", "REX-4100" > > bind "memory_cs" > > > > #card "RATOC SmartMedia Adapter" > > # version "RATOC Systems,Inc.", "SmartMedia ADAPTER PC Card" > > # bind "memory_cs", "ftl_cs" > > > > # > > # Memory Technology Drivers > > # > > region "Generic or SRAM" > > default > > mtd "sram_mtd" > > > > region "Intel Series 2 Flash" > > jedec 0x89 0xa2 > > mtd "iflash2_mtd" > > > > region "Intel Series 100 Flash" > > jedec 0x89 0xaa > > mtd "iflash2_mtd" > > > > region "Intel Series 2+ Flash" > > jedec 0x89 0xa0 > > mtd "iflash2+_mtd" > > > > # > > # Token Ring adapters > > # > > card "3Com TokenLink Velocity Adapter" > > version "3Com", "TokenLink Velocity PC Card" > > bind "ibmtr_cs" > > > > card "IBM Token Ring Adapter" > > version "IBM", "TOKEN RING" > > bind "ibmtr_cs" > > > > # > > # SCSI host adapters > > # > > card "Adaptec APA-1460 SlimSCSI" > > version "Adaptec, Inc.", "APA-1460 SCSI Host Adapter" > > bind "aha152x_cs" > > > > card "Eiger Labs SCSI" > > version "EIger Labs", "PCMCIA-to-SCSI Adapter" > > bind "qlogic_cs" > > > > card "Epson SC200 SCSI" > > version "EPSON", "SCSI-2 PC Card SC200" > > bind "qlogic_cs" > > > > card "IBM SCSI" > > version "IBM Corp.", "SCSI PCMCIA Card" > > bind "fdomain_cs" > > > > card "IBM SCSI" > > version "SCSI PCMCIA Adapter Card" > > bind "fdomain_cs" > > > > #card "MACNICA mPS100 SCSI" > > # version "MACNICA", "MIRACLE SCSI", "mPS100" > > # bind "qlogic_cs" > > > > card "MACNICA mPS110 SCSI" > > version "MACNICA", "MIRACLE SCSI-II mPS110" > > bind "qlogic_cs" > > > > card "Midori CN-SC43 SCSI" > > version "MIDORI ELECTRONICS ", "CN-SC43" > > bind "qlogic_cs" > > > > card "NEC PC-9801N-J03R SCSI" > > version "NEC", "PC-9801N-J03R" > > bind "qlogic_cs" > > > > card "New Media Bus Toaster SCSI" > > version "New Media", "SCSI", "Bus Toaster" > > bind "aha152x_cs" > > > > card "New Media Toast & Jam Sound/SCSI" > > version "New Media Corporation", "Multimedia Sound/SCSI" > > bind "aha152x_cs" > > > > card "Noteworthy Bus Toaster SCSI" > > version "NOTEWORTHY", "SCSI", "Bus Toaster" > > bind "aha152x_cs" > > > > card "New Media BASICS SCSI" > > version "BASICS by New Media Corporation", "SCSI Sym53C500" > > bind "sym53c500_cs" > > > > card "New Media Bus Toaster SCSI" > > version "New Media Corporation", "SCSI Bus Toaster Sym53C500" > > bind "sym53c500_cs" > > > > card "Panasonic KXLC003" > > version "KME ", "KXLC003" > > bind "qlogic_cs" > > > > card "Panasonic KXLC004" > > version "KME ", "KXLC004" > > bind "qlogic_cs" > > > > card "Panasonic KXLC101" > > version "KME", "KXLC101" > > bind "qlogic_cs" > > > > card "Qlogic FastSCSI" > > version "QLOGIC CORPORATION", "pc05" > > bind "qlogic_cs" > > > > card "Qlogic FastSCSI" > > version "QLOGIC CORPORATION", "pc05 rev 1.10" > > bind "qlogic_cs" > > > > card "Raven CD-Note SCSI" > > version "KME", "KXLC002", "00" > > bind "qlogic_cs" > > > > card "RATOC REX-9530 SCSI-2" > > version "RATOC System Inc.", "SCSI2 CARD 37" > > bind "qlogic_cs" > > > > card "SIMA TECH SCSI9000" > > version "*", "SCSI9000" > > bind "sym53c500_cs" > > > > card "Simple Technology SCSI" > > version " SIMPLE TECHNOLOGY Corporation", > > "SCSI PCMCIA Credit Card Controller" > > bind "fdomain_cs" > > > > card "Toshiba SCSC200A SCSI" > > version "TOSHIBA", "SCSC200A PC CARD SCSI" > > bind "qlogic_cs" > > > > card "Toshiba SCSC200B SCSI" > > version "TOSHIBA", "SCSC200B PC CARD SCSI-10" > > bind "qlogic_cs" > > > > # > > # IEEE1394/FireWire cards > > # > > card "Newer Technology FireWire 2 Go" > > pci 0x104c, 0x8000 > > bind "pcilynx_cb" > > > > # > > # Multifunction cards > > # > > card "3Com 3c562/3c563 Ethernet/Modem" > > manfid 0x0101, 0x0562 > > bind "3c589_cs" to 0, "serial_cs" to 1 > > > > card "3Com/Megahertz 3CXEM556 Ethernet/Modem" > > manfid 0x0101, 0x0035 > > cis "cis/3CXEM556.dat" > > bind "3c589_cs" to 0, "serial_cs" to 1 > > > > card "3Com/Megahertz 3CXEM556 B-INT Ethernet/Modem" > > manfid 0x0101, 0x003d > > cis "cis/3CXEM556.dat" > > bind "3c589_cs" to 0, "serial_cs" to 1 > > > > card "3Com/Megahertz 3CCFEM556 Ethernet/Modem" > > manfid 0x0101, 0x0556 > > cis "cis/3CCFEM556.dat" > > bind "3c574_cs" to 0, "serial_cs" to 1 > > > > card "Accton EN2218 LAN/Modem" > > version "PCMCIA", "EN2218-LAN/MODEM" > > cis "cis/PCMLM28.dat" > > bind "pcnet_cs", "serial_cs" > > > > card "Accton UE2218 LAN/Modem" > > version "PCMCIA", "UE2218-LAN/MODEM" > > cis "cis/PCMLM28.dat" > > bind "pcnet_cs", "serial_cs" > > > > card "AnyCom Fast Ethernet/Modem" > > version "AnyCom", "Fast Ethernet + 56K COMBO" > > bind "pcnet_cs", "serial_cs" > > > > card "Apex MultiCard Ethernet/Modem" > > version "APEX DATA", "MULTICARD", "ETHERNET-MODEM" > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "Billionton LM5LT-10B Ethernet/Modem" > > manfid 0x021b, 0x0101 > > bind "pcnet_cs", "serial_cs" > > > > card "Compaq Microcom CPQ550 Ethernet/Modem" > > manfid 0x0138, 0x110a > > bind "xirc2ps_cs", "serial_cs" > > > > card "Dayna Communicard Ethernet/Modem" > > version "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION" > > cis "cis/DP83903.dat" > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "D-Link DME336T Ethernet/Modem" > > version "D-Link", "DME336T" > > bind "pcnet_cs", "serial_cs" > > > > card "D-Link DMF560TX Ethernet/Modem" > > manfid 0x0143, 0xc0ab > > bind "pcnet_cs", "serial_cs" > > > > card "Gateway Telepath Ethernet/Modem" > > version "Gateway 2000", "XJEM3336" > > bind "smc91c92_cs", "serial_cs" > > > > card "Grey Cell GCS3400 Ethernet/Modem" > > version "Grey Cell", "GCS3000" > > bind "pcnet_cs", "serial_cs" > > > > card "IBM Home and Away Ethernet/Modem" > > version "IBM", "Home and Away Credit Card Adapter" > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "IBM Home and Away 28.8 Ethernet/Modem" > > version "IBM", "Home and Away 28.8 PC Card " > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "IBM w95 Home and Away Ethernet/Modem" > > version "IBM", "w95 Home and Away Credit Card " > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "Intel EtherExpress PRO/100 LAN/Modem" > > manfid 0x0089, 0x110a > > bind "xirc2ps_cs", "serial_cs" > > > > card "No-Name Ethernet/Modem" > > version "*", "FAX/Modem/Ethernet Combo Card " > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "Linksys LANmodem 28.8" > > version "LINKSYS", "PCMLM28" > > cis "cis/PCMLM28.dat" > > bind "pcnet_cs", "serial_cs" > > > > card "Linksys LANmodem 33.6" > > version "LINKSYS", "PCMLM336" > > bind "pcnet_cs", "serial_cs" > > > > card "Linksys EtherFast LANmodem 56K" > > version "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)" > > bind "pcnet_cs", "serial_cs" > > > > card "Megahertz CC/XJEM1144 Ethernet/Modem" > > version "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM" > > bind "smc91c92_cs", "serial_cs" > > > > card "Megahertz CC/XJEM1144 Ethernet/Modem" > > version "MEGAHERTZ", "XJEM1144/CCEM1144" > > bind "smc91c92_cs", "serial_cs" > > > > card "Megahertz EM1144T Ethernet/Modem" > > version "MEGAHERTZ", "EM1144T", "PCMCIA MODEM" > > bind "smc91c92_cs", "serial_cs" > > > > card "Megahertz CC/XJEM3288 Ethernet/Modem" > > version "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM" > > bind "smc91c92_cs", "serial_cs" > > > > card "Megahertz CC/XJEM3336 Ethernet/Modem" > > version "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM" > > bind "smc91c92_cs", "serial_cs" > > > > card "Motorola Marquis Ethernet/Modem" > > version "Motorola MARQUIS" > > bind "3c589_cs" to 0, "serial_cs" to 1 > > > > card "Motorola Mariner Ethernet/Modem" > > manfid 0x0109, 0x0501 > > bind "smc91c92_cs", "serial_cs" > > > > card "New Media LANSurfer 10+56 Ethernet/Modem" > > manfid 0x08a1, 0xc0ab > > bind "pcnet_cs", "serial_cs" > > > > card "NSC DP83903-based Ethernet/Modem" > > version "*", "*", "*", "NSC MF LAN/Modem" > > cis "cis/DP83903.dat" > > bind "pcnet_cs" to 0, "serial_cs" to 1 > > > > card "Ositech Jack of Diamonds Ethernet/Modem" > > version "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet" > > bind "smc91c92_cs", "serial_cs" > > > > card "Ositech Jack of Hearts Ethernet/Modem" > > version "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet" > > bind "smc91c92_cs", "serial_cs" > > > > card "Ositech Jack of Hearts Ethernet/Modem" > > manfid 0x0140, 0x000a > > bind "smc91c92_cs", "serial_cs" > > > > card "Psion Gold Card V34 Ethernet" > > version "Psion Dacom", "Gold Card V34 Ethernet" > > cis "cis/PCMLM28.dat" > > bind "pcnet_cs", "serial_cs" > > > > card "Psion Gold Card V34 Ethernet" > > version "Psion Dacom", "Gold Card V34 Ethernet GSM" > > cis "cis/PCMLM28.dat" > > bind "pcnet_cs", "serial_cs" > > > > card "Psion Gold Card Netglobal 56K+10Mb Ethernet" > > manfid 0x016c, 0x0020 > > bind "smc91c92_cs" to 0, "serial_cs" to 1 > > > > card "Rover ComboCard Ethernet/Modem" > > version "PCMCIAs", "ComboCard" > > bind "pcnet_cs", "serial_cs" > > > > card "Socket ES-1000 Ethernet/RS-232" > > manfid 0x0104, 0x000a > > bind "pcnet_cs", "serial_cs" > > > > card "TDK Global Networker Ethernet/Modem" > > version "TDK", "GlobalNetworker 3410/3412" > > bind "serial_cs" > > > > card "TDK 3000/3400/5670 Fast Ethernet/Modem" > > manfid 0x0143, 0x3341 > > bind "pcnet_cs", "serial_cs" > > > > card "TDK DFL5610WS Ethernet/Modem" > > manfid 0x0105, 0xea15 > > bind "pcnet_cs", "serial_cs" > > > > card "Telecom Device SuperSocket LM336 Ethernet/Modem" > > version "PCMCIAs", "LanModem" > > bind "pcnet_cs", "serial_cs" > > > > card "Xircom CE II Ethernet/Modem" > > version "Xircom", "CreditCard Ethernet+Modem II" > > bind "xirc2ps_cs", "serial_cs" > > > > card "Xircom CEM28 Ethernet/Modem" > > version "Xircom", "*", "CEM28" > > bind "xirc2ps_cs", "serial_cs" > > > > card "Xircom CEM33 Ethernet/Modem" > > version "Xircom", "*", "CEM33" > > bind "xirc2ps_cs", "serial_cs" > > > > card "Xircom CEM56 Ethernet/Modem" > > version "Xircom", "*", "CEM56" > > bind "xirc2ps_cs", "serial_cs" > > > > card "Xircom RealPort REM10BT Ethernet/Modem" > > version "Xircom", "*", "REM10" > > bind "xirc2ps_cs", "serial_cs" > > > > card "Xircom XEM5600 Ethernet/Modem" > > version "Xircom", "*", "XEM5600" > > bind "xirc2ps_cs", "serial_cs" > > > > # > > # ATA/IDE fixed disk devices > > # > > card "ATA/IDE Fixed Disk" > > function fixed_disk > > bind "ide_cs" > > > > card "ACE DoubleFlash 20MB" > > version "IBM", "IBM17JSSFP20" > > bind "ide_cs" > > > > card "Argosy EIDE CD-ROM" > > version "ARGOSY", "CD-ROM" > > bind "ide_cs" > > > > card "Caravelle CD-36N/CD-36E CD-ROM" > > version "Caravelle", "PSC-IDE ", "PSC000" > > bind "ide_cs" > > > > card "CNF CARDport CD-ROM" > > version "CNF CD-M", "CD-ROM" > > bind "ide_cs" > > > > card "Creative Technology CD-ROM" > > version "Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card" > > bind "ide_cs" > > > > card "Digital Mobile Media CD-ROM" > > version "Digital Equipment Corporation.", "Digital Mobile Media CD-ROM" > > bind "ide_cs" > > > > card "EXP CD940 CD-ROM" > > version "EXP ", "CD-ROM" > > bind "ide_cs" > > > > card "EXP Traveler 620 CD-ROM" > > version "EXP", "CD+GAME", "C1" > > bind "ide_cs" > > > > card "Freecom IQ-drive" > > version "FREECOM", "PCCARD-IDE" > > bind "ide_cs" > > > > card "Generic ATAPI CD-ROM" > > version "PCMCIA", "CD-ROM" > > bind "ide_cs" > > > > card "IBM Max Portable CD-ROM" > > manfid 0x00a4, 0x002d > > bind "ide_cs" > > > > card "IBM Portable Drive Bay" > > version "PCMCIA", "IDE CARD", "F1" > > bind "ide_cs" > > > > card "IO DATA CDP-TX/PCIDE" > > version "IO DATA", "PCIDE" > > bind "ide_cs" > > > > card "IO DATA PCIDE II" > > version "IO DATA", "PCIDEII" > > bind "ide_cs" > > > > card "IO DATA CBIDE" > > version "WIT", "IDE16" > > bind "ide_cs" > > > > card "IO DATA CBIDE2" > > version "IO DATA", "CBIDE2 " > > bind "ide_cs" > > > > card "MCD601p CD-ROM" > > version "CDROM", "IDE", "MCD-601p" > > bind "ide_cs" > > > > card "Ninja ATA" > > version " ", "NinjaATA-" > > bind "ide_cs" > > > > card "Simple Tech Compact Flash" > > version "STI Flash" > > bind "ide_cs" > > > > card "Toshiba CD-ROM" > > version "LOOKMEET", "CBIDE2 " > > bind "ide_cs" > > > > # > > # Non-ATA/IDE CD-ROM's > > # > > card "Innovative Communications CyberRom CD" > > version "Innovative Communications", "CyberRom CD" > > bind "oti12_cs" > > > > # > > # Miscellaneous card definitions > > # > > #card "Canon FDCard" > > # version "Canon Electronics INC.", "FDCard Ver. 1.00" > > # > > #card "New Media .WAVjammer" > > #version "New Media Corporation", ".WAVjammer" > > > > card "IBM Smart Capture Card" > > version "IBM Corp.", "Video Capture" > > bind "iscc_cs" > > > > card "Parallel Port Card" > > function parallel_port > > bind "parport_cs" > > > > card "Quatech SPP-100 Parallel Port Card" > > manfid 0x0137, 0x0003 > > bind "parport_cs" > > > > card "TELES S0/PC ISDN" > > version "TELES", "S0/PC" > > bind "teles_cs" > > > > # > > # CardBus cards > > # > > card "3Com 3c575-TX Fast EtherLink XL" > > manfid 0x0101, 0x5057 > > bind "3c575_cb" > > > > card "3Com 3CCFE575B/3CXFE575B Fast EtherLink XL" > > manfid 0x0101, 0x5157 > > bind "3c575_cb" > > > > card "3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL" > > manfid 0x0101, 0x5257 > > bind "3c575_cb" > > > > card "3Com 3CCFEM656B w/Winmodem" > > manfid 0x0102, 0x6560 > > bind "3c575_cb" > > > > card "3Com 3CCFEM656B w/Winmodem" > > manfid 0x0102, 0x6562 > > bind "3c575_cb" > > > > card "3Com 3CXFEM656C w/Winmodem" > > manfid 0x0102, 0x6564 > > bind "3c575_cb" > > > > card "Accton EN2220 Fast Ethernet" > > version "Accton", "EN2220 CardBus Fast Ethernet Card" > > bind "tulip_cb" > > > > card "Adaptec APA-1480 SCSI Host Adapter" > > manfid 0x012f, 0xcb01 > > bind "apa1480_cb" > > > > #Conflicts with corega PCC-T! > > #card "Allied Telesyn AT-2800 10/100 Fast Ethernet" > > # manfid 0xc00f, 0x0000 > > # bind "tulip_cb" > > > > card "Ambicom AMB8100 Fast Ethernet" > > manfid 0x9513, 0x0081 > > bind "tulip_cb" > > > > card "Asante FriendlyNET 10/100 CardBus" > > version "Asante", "FriendlyNET 10/100 CardBus" > > bind "tulip_cb" > > > > card "Billionton LND-100B Fast Ethernet" > > version "Billionton", "LND-100B" > > bind "tulip_cb" > > > > card "D-Link DFE-660 Fast Ethernet" > > manfid 0x50c7, 0xcafe > > bind "tulip_cb" > > > > card "Farallon EtherTX 10/100 Fast Ethernet" > > version "Farallon", "10/100", "Ethernet" > > bind "tulip_cb" > > > > card "Fujitsu FMV-J184 Fast Ethernet" > > version "FUJITSU", "LAN Card(100BASE-TX)(FMV-J184)" > > bind "tulip_cb" > > > > card "Fujitsu FMV-J185 Fast Ethernet" > > version "FUJITSU", "LAN Card(100BASE-TX)(FMV-J185)" > > bind "eepro100_cb" > > > > card "Genius MF3000 Fast Ethernet" > > version "CardBus", "10/100Mbps LanCard" > > bind "tulip_cb" > > > > card "IBM 10/100 EtherJet CardBus" > > manfid 0x00a4, 0x0113 > > bind "tulip_cb" > > > > card "IBM 10/100 EtherJet 56K CardBus" > > manfid 0x00a4, 0x0103 > > bind "tulip_cb", "serial_cb" > > > > card "Intel EtherExpress PRO/100 CardBus" > > manfid 0x0089, 0x0102 > > bind "tulip_cb" > > > > card "Intel EtherExpress PRO/100 CardBus Mobile Adapter32" > > manfid 0x0089, 0x0113 > > bind "tulip_cb" > > > > card "Intel EtherExpress PRO/100 CardBus" > > manfid 0x0089, 0x0113 > > bind "tulip_cb" > > > > card "Intel EtherExpress PRO/100 CardBus II" > > manfid 0x0089, 0x0103 > > bind "eepro100_cb" > > > > card "Intel EtherExpress PRO/100 LAN+Modem 56K CardBus II" > > manfid 0x0089, 0x1103 > > bind "eepro100_cb" to 0, "serial_cb" to 1 > > > > card "Kingston KNE-CB4TX Fast Ethernet" > > manfid 0x0186, 0x0101 > > bind "tulip_cb" > > > > card "Linksys EtherFast 10/100" > > manfid 0x0149, 0x0231 > > bind "tulip_cb" > > > > card "Linksys EtherFast 10/100" > > manfid 0x0149, 0xc2ab > > bind "tulip_cb" > > > > card "NDC Communications Sohoware NCB100 Fast Ethernet" > > version "NDC Communications, Inc.", "NCB100" > > bind "tulip_cb" > > > > card "NetGear FA510C Fast Ethernet" > > manfid 0x9513, 0x0081 > > bind "tulip_cb" > > > > card "PLANET ENW-3502-FC" > > version "PLANET", "ENW-3502-FC" > > bind "tulip_cb" > > > > card "PrimeXPress 10/100 Fast Ethernet" > > manfid 0x021b, 0x0510 > > bind "tulip_cb" > > > > card "Silicom FEM56 Fast Ethernet" > > manfid 0x01da, 0x0090 > > bind "tulip_cb" > > > > card "SMC EZ 10/100 Fast Ethernet" > > manfid 0x01bf, 0x2220 > > bind "tulip_cb" > > > > card "SMC EZ 10/100 Fast Ethernet" > > manfid 0x01bf, 0x2225 > > bind "tulip_cb" > > > > #card "SVEC 10/100 Fast Ethernet" > > # manfid 0x8a01, 0x0100 > > # bind "tulip_cb" > > > > card "TDK NetworkFlyer 10/100 Fast Ethernet" > > manfid 0x0105, 0x0500 > > bind "tulip_cb" > > > > card "Tulip-based CardBus Fast Ethernet" > > version "CardBus", "10/100Mbps LAN Card" > > bind "tulip_cb" > > > > card "UMAX Technologies UMAX250 Fast Ethernet" > > manfid 0x9513, 0x0081 > > bind "tulip_cb" > > > > card "Ositech Seven of Spades Fast Ethernet" > > manfid 0x0140, 0x0011 > > bind "epic_cb" > > > > card "Ositech Jack of Spades Fast Ethernet/Modem" > > manfid 0x0140, 0x000f > > bind "epic_cb" to 0, "serial_cb" to 1 > > > > card "Ositech Jack of Spades Fast Ethernet/Modem" > > manfid 0x0140, 0x0012 > > bind "epic_cb" to 0, "serial_cb" to 1 > > > > card "Psion Gold Card Netglobal 56K+10/100Mb CardBus" > > manfid 0x016c, 0x0021 > > bind "epic_cb" to 0, "serial_cb" to 1 > > > > card "Xircom CBEII-10/100 CardBus 10/100 Ethernet" > > version "Xircom", "*", "CBEII-10/100" > > bind "tulip_cb" > > > > card "Xircom R2BE-100BTX CardBus 10/100 Ethernet" > > version "Xircom", "*", "R2BE-100BTX" > > bind "tulip_cb" > > > > card "Xircom CBEM56G-100 CardBus 10/100 Ethernet + 56K Modem" > > version "Xircom", "*", "CBEM56G" > > bind "tulip_cb" to 0, "serial_cb" to 1 > > > > card "Xircom RBM56G Modem" > > manfid 0x0105, 0x1000 > > bind "serial_cb" > > > > # Include configuration files for add-on drivers > > > > source ./*.conf > > > > # Include local configuration settings > > > > source ./config.opts > > no product info available > > Socket 1: > > product info: "Xircom", "CreditCard 10/100", "CE3-10/100", "1.00" > > manfid: 0x0105, 0x010a > > function: 6 (network) > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 160.45.117.128 0.0.0.0 255.255.255.224 U 0 0 0 eth0 0.0.0.0 160.45.117.129 0.0.0.0 UG 1 0 0 eth0