Tom Allison wrote:

Chris Halls wrote:

On Mon, Oct 22, 2001 at 07:02:07AM -0400, Tom Allison wrote:

I'll start looking toward 2.4.12 to see if that is better behaved. At least I have an idea what to look for!

2.4.12 works great with IrDA in FIR mode on my T20.
Chris




I'll be downloading....
Then I'll be calling!  :)



I have attached a dump of the syslog from 'irda start' and it's working!
I'm so happy!

I have one question though -- my baud rate is reported at 9600.
For a palm pilot Vx, can I turn this up?  How High?
irda0     Link encap:IrLAP  HWaddr 25:9c:c3:1e  
          UP RUNNING NOARP  MTU:2048  Metric:1
          RX packets:189 errors:0 dropped:0 overruns:0 frame:0
          TX packets:347 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:8 
          RX bytes:3606 (3.5 Kb)  TX bytes:11036 (10.7 Kb)

Oct 23 05:40:31 thorin kernel: irlap_state_ndm(), media busy!
Oct 23 05:40:35 thorin kernel: irlap_change_speed(), setting speed to 115200
Oct 23 05:40:35 thorin kernel: iriap_connect_indication()
Oct 23 05:40:35 thorin kernel: irlap_recv_disc_frame()
Oct 23 05:40:35 thorin kernel: irlap_change_speed(), setting speed to 9600
Oct 23 05:40:40 thorin kernel: irlap_change_speed(), setting speed to 115200
Oct 23 05:40:40 thorin kernel: iriap_connect_indication()
Oct 23 05:40:40 thorin kernel: irlap_recv_disc_frame()
Oct 23 05:40:40 thorin kernel: irlap_change_speed(), setting speed to 9600
Oct 23 05:40:40 thorin kernel: irlap_state_ndm(), media busy!
Oct 23 05:42:12 thorin irattach: got SIGTERM or SIGINT 
Oct 23 05:42:12 thorin irattach: exiting ... 
Oct 23 05:42:12 thorin kernel: irlmp_register_client_R17f18bfb()
Oct 23 05:42:13 thorin irattach: executing: '/sbin/modprobe irda0'
Oct 23 05:42:13 thorin irattach: executing: 'echo 1 > 
/proc/sys/net/irda/discovery'
Oct 23 05:42:13 thorin irattach: Starting device irda0
Oct 23 05:42:13 thorin irattach: executing: 'echo thorin > 
/proc/sys/net/irda/devname'
Oct 23 05:42:13 thorin kernel: irlmp_register_client_R17f18bfb()
Oct 23 05:42:13 thorin kernel: irlap_change_speed(), setting speed to 9600
Oct 23 05:44:18 thorin kernel: ircomm_tty_attach_cable()
Oct 23 05:44:18 thorin kernel: ircomm_tty_ias_register()
Oct 23 05:44:18 thorin kernel: irlmp_register_client_R17f18bfb()
Oct 23 05:44:26 thorin kernel: irlap_change_speed(), setting speed to 115200
Oct 23 05:44:26 thorin kernel: ircomm_param_service_type(), services in 
common=06
Oct 23 05:44:26 thorin kernel: ircomm_param_service_type(), resulting service 
type=0x04
Oct 23 05:44:27 thorin kernel: ircomm_param_xon_xoff(), XON/XOFF = 0x11,0x13
Oct 23 05:44:27 thorin kernel: ircomm_param_enq_ack(), ENQ/ACK = 0x13,0x11
Oct 23 05:44:27 thorin kernel: ircomm_tty_check_modem_status()
Oct 23 05:44:37 thorin kernel: ircomm_param_xon_xoff(), XON/XOFF = 0x11,0x13
Oct 23 05:44:37 thorin kernel: ircomm_param_enq_ack(), ENQ/ACK = 0x13,0x11
Oct 23 05:44:37 thorin kernel: ircomm_tty_check_modem_status()
Oct 23 05:45:14 thorin kernel: ircomm_tty_close()
Oct 23 05:45:14 thorin kernel: ircomm_tty_shutdown()
Oct 23 05:45:14 thorin kernel: ircomm_tty_detach_cable()
Oct 23 05:45:14 thorin kernel: ircomm_close()
Oct 23 05:45:18 thorin kernel: IrLAP, no activity on link!
Oct 23 05:45:27 thorin kernel: irlap_change_speed(), setting speed to 9600

Reply via email to