hello everybody ;) well, I get a problem with my laptop (Clevo 668 Multimedia Notebook), and with a Potato. The soundcard is :
. controller : ESS1879 (proprietary driver), PnP, 16-bit stereo, full-duplex 16-bit ADC, 3 DACs for audio, music synthesis and I²S zoom-video max. record & playback up to 44Khz stereo (WAVE audio) 20-voice FM music (ESFM(tm) technology) . wavetable : ESS692 . compatibility : Sound Blaster Pro(tm) 3.01, 16-bit FM, MU401(UART mode), MS Windows Sound System(tm) I have tried : pnpdump -rDim : # $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $ # # Release isapnptools-1.21 (library isapnptools-1.21) # # # # This is free software, see the sources for details. # # This software has NO WARRANTY, use at your OWN RISK # # # # For details of the output file format, see isapnp.conf(5) # # # # For latest information and FAQ on isapnp and pnpdump see: # # http://www.roestock.demon.co.uk/isapnptools/ # # # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR # # (for library: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR) # # # # Trying port address 0273 # # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 # # ff ff - bit 00, goodaddress 0 *** 00 # [...] # Trying port address 03f3 # [...] # fc fc - bit 00, goodaddress 0 *** csum *** 00 # No boards found "No boards found"...! But, so, I got : <- beginning of my /etc/isapnp.conf -> #(debug) #(IGNORECRC) #(READPORT 0x3bb) #(ISOLATE) #(IDENTIFY *) #(CONFIGURE DFX0000/1493 (LD 0 (IO 0 (BASE 0x3e8)) (INT 0 (IRQ 12 (MODE +E))) (A CT Y))) #(CONFIGURE DFX0000/1493 (LD 0 (REG 7 (PEEK)) (REG 0x30 (PEEK)))) #(CONFIGURE DFX0000/1493 (LD 1 (REG 7 (PEEK)) (REG 0x30 (PEEK)))) # Try to force logical device 2 (which doesn't exist)... #(CONFIGURE DFX0000/1493 (LD 1 (REG 7 (POKE 2) (PEEK)) (REG 0x30 (PEEK)))) # .. hence this gives an error #(CONFIGURE DFX0000/1493 (LD 2 (REG 7 (PEEK)) (REG 0x30 (PEEK)))) #(WAITFORKEY) <- end of my /etc/isapnp.conf -> then I reboot to have a look at the BIOS ; it offers the following settings : Audio Port Addresses : 220h-22Fh (default value) 240h-24Fh 260... 280 Midi Port Addresses : 300h-303h (default value) 310h-313h 320... 330... Audio/Midi IRQ : IRQ 5 (default value) IRQ 7 IRQ 9 IRQ 10 Audio DMA CH1 : DMA 0 DMA 1 DMA 3 (default value) Audio DMA CH2 : DMA 1 DMA 3 DMA 5 (default value) now, I have : # dmesg Linux version 2.2.17 ([EMAIL PROTECTED]) (gcc version 2.95.2 20000313 (Debian GNU/Li nux)) #1 Sun Jun 25 09:24:41 EST 2000 [...] PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio hda: IBM-DBCA-206480, ATA DISK drive hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: IBM-DBCA-206480, 6194MB w/420kB Cache, CHS=839/240/63 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 [...] Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 3.01 detected OK (220) ESS chip ES1879 detected # => [ok with the User's Manual : controller : ESS1879] Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Linux PCMCIA Card Services 3.1.8 kernel build: 2.2.17 unknown options: [pci] [cardbus] [apm] Intel PCIC probe: TI 1250A PCI-to-CardBus at bus 0 slot 3, mem 0x68000000, 2 sockets host opts [0]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 3 2/34] host opts [1]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 3 5/37] ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x807 cs: IO port probe 0x0100-0x04ff: excluding 0x300-0x307 0x378-0x37f 0x388-0x38f 0 x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. aha152x: processing commandline: ok aha152x: BIOS test: passed, detected 1 controller(s) aha152x0: vital data: PORTBASE=0x340, IRQ=3, SCSI ID=7, reconnect=enabled, parit y=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ scsi : 1 host. aha152x_cs: no SCSI devices found scsi : 0 hosts. tty02 at 0x02f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 [SPP] parport_probe: failed parport0: no IEEE-1284 device present. lp0: using parport0 (polling). [...] # lsmod Module Size Used by ppp_deflate 38988 0 (autoclean) bsd_comp 3828 0 (autoclean) ppp 20684 0 (autoclean) [ppp_deflate bsd_comp] slhc 4436 0 (autoclean) [ppp] af_packet 6040 0 (autoclean) parport_probe 3332 0 (autoclean) parport_pc 7236 1 (autoclean) lp 5188 1 (autoclean) parport 7280 1 (autoclean) [parport_probe parport_pc lp] serial_cs 5388 0 (unused) aha152x_cs 24484 0 (unused) lockd 31112 1 (autoclean) sunrpc 52420 1 (autoclean) [lockd] ds 6536 2 [serial_cs aha152x_cs] i82365 28516 2 pcmcia_core 44416 0 [serial_cs aha152x_cs ds i82365] serial 19564 1 (autoclean) [serial_cs] sb 33396 0 uart401 6128 0 [sb] sound 57592 0 [sb uart401] soundlow 416 0 [sound] soundcore 2628 5 [sb sound] sg 15320 0 (unused) unix 10212 32 (autoclean) # cat /proc/sound OSS/Free:3.8s2++-971130 Load type: Driver loaded as a module Kernel: Linux ile 2.2.17 #1 Sun Jun 25 09:24:41 EST 2000 i686 Config options: 0 Installed drivers: Card config: Audio devices: 0: ESS ES1879 AudioDrive (rev 11) (3.01) # => [ok with the User's Manual : controller : ESS1879] Synth devices: Midi devices: # => [not ok with the User's Manual : wavetable : ESS692] Timers: 0: System clock Mixers: 0: Sound Blaster # cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0220-022f : soundblaster # => [ok with the BIOS : Audio Port Addresses : 220h-22Fh (default # value)] 02f8-02ff : serial(set) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) 1100-1107 : ide0 1108-110f : ide1 13f8-13ff : serial(set) # cat /proc/interrupts CPU0 0: 343134 XT-PIC timer 1: 10962 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 26386 XT-PIC serial 5: 1 XT-PIC soundblaster # => [ok with the BIOS : Audio/Midi IRQ : IRQ 5 (default value)] 8: 1 XT-PIC rtc 12: 0 XT-PIC PS/2 Mouse 13: 1 XT-PIC fpu 14: 249676 XT-PIC ide0 15: 8 XT-PIC ide1 NMI: 0 # cat /proc/dma 1: SoundBlaster8 # => [ok with the User's Manual : compatibility : Sound Blaster Pro(tm) 3.01] 4: cascade # cat /proc/devices Character devices: [...] 14 sound [...] but, when I use xmms, I get (xsonsole) : Aug 22 13:34:46 ile kernel: Sound: DMA (output) timed out - IRQ/DRQ config error ? could somebody explain me how to configure (editing the files) IRQ/DMA/... ? Links ? Docs ? PS: I don't have M$/Windo$e ! -- Phil