hi emilien, you will have to recompile the pcmcia-modules because you recompiled your kernel.
greetings, uLI On Tue, Apr 17, 2001 at 09:28:04AM +0200 or thereabouts, Emilien Arino wrote: > Hi, > > > Sorry, the precompiled kernel was made for my laptop which has the > > Actiontec combo card. You have to recompile your own kernel, based > > on the kernel config file that was enclosed to the tarball. Just > > disable the incorrect Ethernet driver and enable yours. > > Best use make-kpkg to build the kernel so that you will get a deb! > > > > I recompiled the kernel using your kernel config file (with the 3com > ethernet driver enabled and the etherpro disabled). > I recompiled it on another computer running Potato using the following > commands: > make-kpkg clean > su root > make-kpkg --revision=custom kernel_image > > Then I installed the new kernel ant the patched pcmcias debs (included in > Dell.tgz) but at reboot, I get tons of: > depmod : unresolved symbol in /lib/modules/2.4.3/pcmcia/3c574.o > ... > ... > (one for each module listed in /lib/modules/2.4.3/pcmcia) > > There are also a few > modprobe :modprobe : Can't locate module nls_ cp437.0 > ... > > But the ethernet card works. > > Is it because I didn't run : make modules ? Do I have to run : make modules > even if I use make-kpkg? > > Thanks, > Emilien Arino > > > > > Cheers, > > Guenter > > > > -- > > Linux: Who needs GATES in a world without fences? > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
