Can anyone help me to understand how my hibernation system works so I can try to restore it?
I have a Sony Vaio F340 and the bios is Phoenix. (Phoenix Bios 4, release 6). Hibernation has not worked since I installed Debian. In fact, when I try to invoke hibernation the screen freezes up and I have found no escape sequence, such as control-alt-delete or control-alt f2, that has any effect so I have to turn off the power switch and restart. The current partition table, from fdisk, looks like this. ------------------------ ~# fdisk /dev/hda Command (m for help): p Disk /dev/hda: 240 heads, 63 sectors, 839 cylinders Units = cylinders of 15120 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 410 3099568+ b Win95 FAT32 /dev/hda2 556 558 22680 83 Linux /dev/hda3 559 839 2124360 5 Extended /dev/hda4 411 555 1096200 83 Linux /dev/hda5 559 830 2056288+ 83 Linux /dev/hda6 831 839 68008+ 82 Linux swap --------------------------- Debian is on hda4 and uses hda6 for swap. Windows is on hda1. Redhat Linux is on hda2 (/boot) and hda5 (/) and shares /hda6 as swap. Notice that hda4 is physically right after hda1. The history of this setup is as follows. The laptop came with Windows98, with the 6 GB disk partitioned into a 4 GB "C" drive and a 2 GB "D" drive. Without doing any new partitioning I installed first Corel Linux and then replaced it with Redhat Linux on the former "D" partition. At that point the hibernation feature still worked. The partition table at that time showed hda1 (4GB), and hda2, 3 (the extended partition), 5, and 6 as above. There was no hda4 in the table at that time. When I installed Debian, I left Redhat in place and formed the new 1 GB partition hda4 by shrinking the Windows partion hda1 to 3 GB using fips. That is when hibernation stopped working. Is it reasonable for me to infer from this that hibernation used the end of the original "C" partition hda1? What I read mostly says hibernation uses hda4 but the partition tables did not list an hda4 before I created it to install Debian. Also, now that I have four primary partitions I can not create a new hda4 as a new hibernation partition as some have suggested, at least without reorganizing things in some way. Would there be some way I could reinstall hibernation in the last portion of hda1 or elsewhere using something like phdisk or lphdisk or some other means? So far I have not located a description or documentation for phdisk. Thanks in advance to anyone who can give me an explanation of this. Steve
