Hi,
I have trouble getting the Netgear FA510 Cardbus Fast Ethernet Card to
work. While "cardctl ident" reports the correct card I cannot ping
another computer connected via a cross over cable (but it works in W2k).
I attached some data below.
I appreciate any suggestion,
Felix
The data:
> lsmod (after removing the sound card modules)
tulip_cb 31952 2
cb_enabler 2504 2 [tulip_cb]
ppp_deflate 38816 0 (autoclean)
bsd_comp 3704 0 (autoclean)
ppp 19712 0 (autoclean) [ppp_deflate bsd_comp]
slhc 4368 0 (autoclean) [ppp]
ds 6376 1 [cb_enabler]
i82365 22348 1
pcmcia_core 44832 0 [cb_enabler ds i82365]
nls_cp437 3872 3 (autoclean)
> cardctl ident
Socket 0:
product info: "NETGEAR", "FA510", "Fast Ethernet CardBus Card", "1.00"
manfid: 0x9513, 0x0081
function: 6 (network)
PCI id: 0x1011, 0x0019
> ifconfig (on the laptop)
eth0 Link encap:Ethernet HWaddr 00:10:7A:15:B8:E1
inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:12 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:3 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:2126 errors:0 dropped:0 overruns:0 frame:0
TX packets:2126 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
> ifconfig (on the connected computer)
eth0 Link encap:Ethernet HWaddr 00:0A:66:3C:F9:43
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:5 Base address:0xb000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
