I believe my 365X is the same as your 365XD, at least video-wise. Mine is an
active matrix running on a Trident Cyber chipset. Attached is my X86Config
file,
which runs 800x600 @ 8-bit. This particular config is for a virtual screen size
of 1152x900. I'm running potato w/ whatever version of x comes standard with
potato. This config also worked under slink. Good luck.
Forrest English wrote:
> it's the 11.3 active matrix model. i've found other people's configs
> online, but none of them seem to be helpful at all. the best i've gotten
> is 640x480 with messed up colors and flickering that makes it impossible
> to read, much less look at.
>
> however, people apear to have gotten 800x600 8bit just fine. do i NEED
> to use xfree 3.2 instead of 3.3.6 out of potato?
>
> any help here would be great. i like the console fine... but, x would be
> nice.
>
> --
> Forrest English
> http://truffula.net
>
> "I don't like this air, but that doesn't
> mean I'm going to stop breathing."
> -Doug Martsch
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
# File generated by anXious - the Debian X Configuration Tool
# anXious and xviddetect are (c) 2000 Randolph Chung <[EMAIL PROTECTED]>
# Suggestions and bug reports about this tool should be sent to
# [EMAIL PROTECTED]
# ***************************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file. A more thoroughly commented version of this configuration
# file can be found in /usr/share/doc/xserver-common/examples/XF86Config.eg
# ***************************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/lib/X11/fonts/cyrillic/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1/"
FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/cyrillic/"
FontPath "/usr/lib/X11/fonts/100dpi/"
FontPath "/usr/lib/X11/fonts/75dpi/"
ModulePath "/usr/X11R6/lib/modules"
EndSection
# Section "Module"
# Load "xf86Jstk.so"
# EndSection
Section "ServerFlags"
# NoTrapSignals
# DontZap
# DontZoom
# DisableVidModeExtension
# AllowNonLocalXvidtune
# DiableModInDev
# AllowNonLocalModInDev
EndSection
Section "Keyboard"
Protocol "Standard"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
# if you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeymap "xfree86(en_US)"
EndSection
Section "Pointer"
# Protocol "PS/2"
# Device "/dev/mouse"
Protocol "ps/2"
Device "/dev/psaux"
Emulate3Buttons
EndSection
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 25-64
VertRefresh 50-90
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
EndSection
Section "Device"
Identifier "My Video Card"
VendorName "Unknown"
BoardName "Unknown"
VideoRam 1024
EndSection
Section "Screen"
Driver "svga"
Device "My Video Card"
Monitor "My Monitor"
DefaultColorDepth 8
Subsection "Display"
Depth 8
Modes "800x600"
ViewPort 0 0
Virtual 1152 900
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600"
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600"
EndSubsection
Subsection "Display"
Depth 32
Modes "800x600"
EndSubsection
EndSection
