Myself, I'd use minicom and play. It looks as though something is kicking
on ttyS00 and ttyS02, so I'd check those first. A simple ATZ sent via minicom
will give you an OK or just ignore ya (no modem there). If yer ignored, try
the next one! :--)
Then, as "The Star" advised, use a good text editor and correct the
wvdial.conf (if that's the file it builds { I use autoppp so don't know
wvdial } ).
On Sunday 31 December 2000 15:27, Kamath wrote something to this effect:
> i used dmesg .. amongst the messages are
>
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
>
> then again under the Intel PCIC probe is the message
> ttyS02 at 0x03e8 (irq = 3) is a 16550A
>
>
> .......
> Registered device ppp0
>
> then when i run wvdial
> i get the message
> ---> Cannot open /dev/ttyS1: Input/output error
>
> any clues on this one anyone??
--
______________________________________________________________________________
OutCast Computer Consultants of Central Oregon
http://outcast-consultants.redmond.or.us
[EMAIL PROTECTED]
(541) 504-1388
Via IRC at; 205.227.115.251:6667:#OutCasts
Via ICQ: UIN 138930
