i can't see vesa configuration in your XF86Config, you say that used dpkg-reconfigure, it creates XF86Config-4 , maybe xfree is reading your XF86Config-4 and not XF86Config.
On Thu, 24 Feb 2005 18:55:15 -0800 Cyprian Laskowski <[EMAIL PROTECTED]> wrote: > Hello, > > I have recently installed debian (sarge) on a Dell Inspiron 1150 with > an XGA 15 inch monitor, and an Intel 852GM/GME/GMV (64MB) video > controller. However, I have not been able to configure and > successfully start X (version 4.3.0.1). I have very little experience > with this, and am not comfortable with hardware issues, and so I > haven't been able to figure out what exactly is causing the problem > and how to fix it. I would really appreciate any help/pointers. > > I installed and configured X via aptitude, and subsequently tried > reconfiguring with dpkg-reconfigure and xf86config. But each time, > the server crashes before it gets anywhere. The big problem appears > to start after "Searching for matching VESA mode(s)". It then tries > such a variety of different modes, but, what I find extremely bizarre, > all the parameters for each mode appear as 0 or 0x0! After that it > says "VESA(0): No matching modes", and finally "Screen(s) found, but > none have a usable configuration." > > I'm including XF86Config file at the bottom. I would like to include > the log file too, but as it's pretty long, and I don't want to annoy > anybody. :) > > Thanks in advance for any help. > > cyp > > > /etc/X11/XF86Config: > --------------------------------------- > # File generated by xf86config. > > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > > # This loads the DBE extension module. > > Load "dbe" # Double buffer extension > > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > > # This loads the Type1 and FreeType font modules > Load "type1" > Load "speedo" > # Load "freetype" > # Load "xtt" > > # This loads the GLX module > # Load "glx" > # This loads the DRI module > # Load "dri" > > EndSection > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > # FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" > # FontPath "/usr/X11R6/lib/X11/fonts/freefont/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > # The module search path. The default path is shown here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # Option "NoTrapSignals" > > # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence > # (where n is 1 through 12). This allows clients to receive these key > # events. > > # Option "DontVTSwitch" > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # Option "DontZap" > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # Option "Dont Zoom" > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # Option "DisableVidModeExtension" > > # Uncomment this to enable the use of a non-local xvidtune client. > > # Option "AllowNonLocalXvidtune" > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # Option "DisableModInDev" > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # Option "AllowNonLocalModInDev" > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > Identifier "Keyboard1" > Driver "Keyboard" > > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > > # Option "Protocol" "Xqueue" > > Option "AutoRepeat" "500 30" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > # Option "XkbRules" "xfree86" > # Option "XkbModel" "pc101" > # Option "XkbLayout" "us" > # Option "XkbVariant" "" > # Option "XkbOptions" "" > > # Option "XkbDisable" > > Option "XkbRules" "xfree86" > Option "XkbModel" "microsoft" > Option "XkbLayout" "jp" > > EndSection > > > # ********************************************************************** > # Core Pointer's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > # Identifier and driver > > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Auto" > Option "Device" "/dev/mouse" > > # Mouse-speed setting for PS/2 mouse. > > # Option "Resolution" "256" > > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > > # Option "Protocol" "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice. In > # almost every case these lines should be omitted. > > # Option "BaudRate" "9600" > # Option "SampleRate" "150" > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" > > # ChordMiddle is an option for some 3-button Logitech mice > > # Option "ChordMiddle" > > EndSection > > > # ********************************************************************** > # Other input device sections > # this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the XF86Config man page for a description of the options. > # ********************************************************************** > # > # Section "InputDevice" > # Identifier "Mouse2" > # Driver "mouse" > # Option "Protocol" "MouseMan" > # Option "Device" "/dev/mouse2" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball" > # Driver "magellan" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball2" > # Driver "spaceorb" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen0" > # Driver "microtouch" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "1412" > # Option "MaxX" "15184" > # Option "MinY" "15372" > # Option "MaxY" "1230" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen1" > # Driver "elo2300" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "231" > # Option "MaxX" "3868" > # Option "MinY" "3858" > # Option "MaxY" "272" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonThreshold" "17" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > > # ********************************************************************** > # Monitor section > # ********************************************************************** > > # Any number of monitor sections may be present > > Section "Monitor" > > Identifier "My Monitor" > > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > HorizSync 31.5 > > # HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies > > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > VertRefresh 50-70 > > EndSection > > > # ********************************************************************** > # Graphics device section > # ********************************************************************** > > # Any number of graphics device sections may be present > > # Standard VGA Device: > > Section "Device" > Identifier "Standard VGA" > VendorName "Unknown" > BoardName "Unknown" > > # The chipset line is optional in most cases. It can be used to override > # the driver's chipset detection, and should not normally be specified. > > # Chipset "generic" > > # The Driver line must be present. When using run-time loadable driver > # modules, this line instructs the server to load the specified driver > # module. Even when not using loadable driver modules, this line > # indicates which driver should interpret the information in this section. > > Driver "vga" > # The BusID line is used to specify which of possibly multiple devices > # this section is intended for. When this line isn't present, a device > # section can only match up with the primary video device. For PCI > # devices a line like the following could be used. This line should not > # normally be included unless there is more than one video device > # intalled. > > # BusID "PCI:0:10:0" > > # VideoRam 256 > > # Clocks 25.2 28.3 > > EndSection > > # Device configured by xf86config: > > Section "Device" > Identifier "** Intel i810 (generic) [i810]" > Driver "i810" > #VideoRam 65536 > # Insert Clocks lines here if appropriate > EndSection > > > # ********************************************************************** > # Screen sections > # ********************************************************************** > > # Any number of screen sections may be present. Each describes > # the configuration of a single screen. A single specific screen section > # may be specified from the X server command line with the "-screen" > # option. > Section "Screen" > Identifier "Screen 1" > Device "** Intel i810 (generic) [i810]" > Monitor "My Monitor" > DefaultDepth 1 > > Subsection "Display" > Depth 8 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > EndSection > > # ********************************************************************** > # ServerLayout sections. > # ********************************************************************** > > # Any number of ServerLayout sections may be present. Each describes > # the way multiple screens are organised. A specific ServerLayout > # section may be specified from the X server command line with the > # "-layout" option. In the absence of this, the first section is used. > # When now ServerLayout section is present, the first Screen section > # is used alone. > > Section "ServerLayout" > > # The Identifier line must be present > Identifier "Simple Layout" > > # Each Screen line specifies a Screen section name, and optionally > # the relative position of other screens. The four names after > # primary screen name are the screens to the top, bottom, left and right > # of the primary screen. In this example, screen 2 is located to the > # right of screen 1. > > Screen "Screen 1" > > # Each InputDevice line specifies an InputDevice section name and > # optionally some options to specify the way the device is to be > # used. Those options include "CorePointer", "CoreKeyboard" and > # "SendCoreEvents". > > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > > EndSection > > # Section "DRI" > # Mode 0666 > # EndSection > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
pgpOKRybXqKO0.pgp
Description: PGP signature
