Hi,
I've a Toshiba M30X-131 laptop with Debian Sid
and XFree86 Version 4.3.0.1 running.
The video card is an ATI Radeon 9700. I installed
the recent ATI driver and the module is going to
be loaded.
[EMAIL PROTECTED]:~$ lsmod
Module Size Used by
fglrx 240284 0
But glxgears just calculates small values like
466 frames in 5.0 seconds = 93.200 FPS
and glxinfo indicates that the 3D acceleration is
not running.
[EMAIL PROTECTED]:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
OpenGL extensions:
GL_ARB_multitexture, GL_ARB_imaging, GL_EXT_blend_color,
GL_EXT_blend_minmax
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 1 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 1 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 1 24 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 1 24 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 1 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 1 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 1 24 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 1 24 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
I also used to follow the introduction
http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html
got the save problem as above.
My XF86Config-4 reads:
[snip]
Section "Module"
...
Load "GLcore"
Load "glx"
Load "dri"
...
# Load "extmod" but omit DGA extension
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
...
EndSection
Section "Device"
Identifier "ATI"
Driver "fglrx" # this is the important bit
# If X refuses to use the screen resolution you asked for,
# uncomment this; see "Bugs and Workarounds" for details.
#Option "NoDDC"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Use internal AGP GART support? ===
# If OpenGL acceleration doesn't work, try using "yes" here
# and disable the kernel agpgart driver.
Option "UseInternalAGPGART" "no"
EndSection
Section "Screen"
Identifier "your screen"
Device "ATI"
Monitor "your monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x960" # this is only an example,
# use your preferred resolution here
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[snip]
The kernel is running without framebuffer and DRM.
grep FB .config
# CONFIG_FB is not set
grep DRM .config
# CONFIG_DRM is not set
I also played with agpgart, tried to load it as a module
or leave it out and setting the appropriate values
for Option "UseInternalAGPGART.
But all these steps didn't enable the 3D support.
Any ideas how to fix this problem?
Thanks
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
