I'm having a strange problem getting my Linksys Etherfast PCMPC200
card working. Using the stock Debian kernel 2.2.20-idepci, it works
fine. However, i need a custom kernel to support other hardware (and
reiserfs). I've tried the kernel-source-2.4.20 package but the tulip
pcmcia module isn't there and the xircom_tulip_cb.o doesn't seem to
work. I'm running Sarge sometimes booting the woody 2.2.20-idepci
kernel, and sometimes with 2.4.20.
Using 2.2.20, lsmod gives this output
Module Size Used by
tulip_cb 31712 1
cb_enabler 2496 2 [tulip_cb]
ds 6400 2 [cb_enabler]
i82365 22640 2
pcmcia_core 45792 0 [cb_enabler ds i82365]
parport_pc 7276 1 (autoclean)
lp 4580 1 (autoclean)
parport 6676 1 (autoclean) [parport_pc lp]
af_packet 6136 0 (unused)
Hotplug takes care of everything.
Using 2.4.20, i get no help from hotplug nor modprobe.
What am i missing?
--
mark wilson
+===================================================+
this message sent using Linux (Debian Sarge)
**GnuPG public key available**
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
