> >
> > Hello, I am running Debian sarge on a Toshiba Tecra 9100 running
> > kernel 2.6.8-1-686. I am using a Cisco Aironet 350 card. Both airo
> > and airo_cs modules are loaded when I insert the card, however when
> > I try to bring up the interface, it reports that bringing up the
> > interface. I cannot find any error messages in syslog or dmesg.
> > The same card was working with 2.6.6-1-686. Is anyone facing the
> > same problem and solved it ? -- Gokul
> >
> >
>
> grep airo /var/log/*.log /var/log/messages /syslog
>
> reports what?
>
this is my configuration in /etc/network/interfaces
iface home inet dhcp
wireless-essid (ssid)
wireless-key (wireless key)
pre-up /opt/cisco/bin/bcard
I bring the interface up with ifup eth2=home. The same conf file works
with kernels 2.4.25, 2.4.27 and 2.6.6. I need to run bcard (a cisco
utility), otherwise even the other kernels don't work.
Log file messages follow.
before ifup
/var/log/messages:Dec 14 10:13:20 localhost kernel: airo: Probing for
PCI adapters
/var/log/messages:Dec 14 10:13:20 localhost kernel: airo: Finished
probing for PCI adapters
/var/log/messages:Dec 14 10:13:21 localhost kernel: airo: MAC enabled
eth2 0:9:e8:b4:d7:ff
/var/log/kern.log:Dec 14 10:13:20 localhost kernel: airo: Probing for
PCI adapters
/var/log/kern.log:Dec 14 10:13:20 localhost kernel: airo: Finished
probing for PCI adapters
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: cmd= 111
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: status= 7f11
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: Rsp0= 2
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: Rsp1= 0
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: Rsp2= 0
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: Doing fast bap_reads
/var/log/kern.log:Dec 14 10:13:21 localhost kernel: airo: MAC enabled
eth2 0:9:e8:b4:d7:ff
/var/log/daemon.log:Dec 14 10:13:20 localhost cardmgr[2367]:
executing: 'modprobe airo_cs'
after ifup
no changes in log file
--
Gokul
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
