try to install xfs On Tue, 2004-10-19 at 20:24, [EMAIL PROTECTED] wrote: > Hi! > I am a debian newbie and I installed debian sarge 2.6.8 on my apple > powerbook g3 firewire laptop. The installation ran fine but I have a > problem with the GUI. These are the errors that I am getting. I tried > solving them by using > dpkg-reconfigure xserver-xfree86 and startx commands with no success. > Can somebody help me in thi matter. > > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) > (II) R128(0): Generic Monitor: Using hsync range of 28.00-50.00 kHz > (II) R128(0): Generic Monitor: Using vrefresh range of 43.00-75.00 Hz > (II) R128(0): Clock range: 12.50 to 250.00 MHz > (II) R128(0): Not using default mode "640x350" (vrefresh out of range) > (II) R128(0): Not using default mode "320x175" (vrefresh out of range) > (II) R128(0): Not using default mode "640x400" (vrefresh out of range) > (II) R128(0): Not using default mode "320x200" (vrefresh out of range) > (II) R128(0): Not using default mode "720x400" (vrefresh out of range) > (II) R128(0): Not using default mode "360x200" (vrefresh out of range) > (II) R128(0): Not using default mode "640x480" (vrefresh out of range) > (II) R128(0): Not using default mode "320x240" (vrefresh out of range) > (II) R128(0): Not using default mode "800x600" (hsync out of range) > (II) R128(0): Not using default mode "400x300" (hsync out of range) > (II) R128(0): Not using default mode "1024x768" (vrefresh out of range) > (II) R128(0): Not using default mode "512x384" (vrefresh out of range) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "512x384" (hsync out of range) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "512x384" (hsync out of range) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "512x384" (hsync out of range) > (II) R128(0): Not using default mode "1152x864" (hsync out of range) > (II) R128(0): Not using default mode "576x432" (hsync out of range) > (II) R128(0): Not using default mode "1280x960" (hsync out of range) > (II) R128(0): Not using default mode "640x480" (hsync out of range) > (II) R128(0): Not using default mode "1280x960" (hsync out of range) > (II) R128(0): Not using default mode "640x480" (hsync out of range) > (II) R128(0): Not using default mode "1280x1024" (hsync out of range) > (II) R128(0): Not using default mode "640x512" (hsync out of range) > (II) R128(0): Not using default mode "1280x1024" (hsync out of range) > (II) R128(0): Not using default mode "640x512" (hsync out of range) > (II) R128(0): Not using default mode "1280x1024" (hsync out of range) > (II) R128(0): Not using default mode "640x512" (hsync out of range) > (II) R128(0): Not using default mode "1600x1200" (hsync out of range) > (II) R128(0): Not using default mode "800x600" (hsync out of range) > (II) R128(0): Not using default mode "1600x1200" (hsync out of range) > (II) R128(0): Not using default mode "800x600" (hsync out of range) > (II) R128(0): Not using default mode "1600x1200" (hsync out of range) > (II) R128(0): Not using default mode "800x600" (hsync out of range) > (II) R128(0): Not using default mode "1600x1200" (hsync out of range) > (II) R128(0): Not using default mode "800x600" (hsync out of range) > (II) R128(0): Not using default mode "1600x1200" (hsync out of range) > (II) R128(0): Not using default mode "800x600" (hsync out of range) > (II) R128(0): Not using default mode "1792x1344" (hsync out of range) > (II) R128(0): Not using default mode "896x672" (hsync out of range) > (II) R128(0): Not using default mode "1792x1344" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "896x672" (hsync out of range) > (II) R128(0): Not using default mode "1856x1392" (hsync out of range) > (II) R128(0): Not using default mode "928x696" (hsync out of range) > (II) R128(0): Not using default mode "1856x1392" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "928x696" (hsync out of range) > (II) R128(0): Not using default mode "1920x1440" (hsync out of range) > (II) R128(0): Not using default mode "960x720" (hsync out of range) > (II) R128(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "960x720" (hsync out of range) > (II) R128(0): Not using default mode "1400x1050" (hsync out of range) > (II) R128(0): Not using default mode "700x525" (hsync out of range) > (II) R128(0): Not using default mode "1400x1050" (hsync out of range) > (II) R128(0): Not using default mode "700x525" (hsync out of range) > (II) R128(0): Not using default mode "1600x1024" (hsync out of range) > (II) R128(0): Not using default mode "800x512" (hsync out of range) > (II) R128(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "960x720" (hsync out of range) > (II) R128(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "1152x768" (width too large for > virtual size) > (II) R128(0): Not using default mode "1024x768" (width too large for > virtual size) > (II) R128(0): Not using default mode "832x624" (width too large for > virtual size) > (II) R128(0): Not using default mode "800x600" (width too large for > virtual size) > (II) R128(0): Not using default mode "800x600" (width too large for > virtual size) > (II) R128(0): Not using default mode "800x600" (width too large for > virtual size) > (II) R128(0): Not using default mode "800x600" (width too large for > virtual size) > (--) R128(0): Virtual size is 640x480 (pitch 640) > (**) R128(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) R128(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 > -hsync -vsync > (**) R128(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) R128(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 > -hsync -vsync > (**) R128(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) R128(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 > -hsync -vsync > (**) R128(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) > (II) R128(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 > doublescan +hsync +vsync > (**) R128(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) > (II) R128(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 > doublescan -hsync -vsync > (**) R128(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) > (II) R128(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 > doublescan -hsync -vsync > (**) R128(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) > (II) R128(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 > doublescan +hsync +vsync > (**) R128(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) > (II) R128(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 > doublescan +hsync +vsync > (**) R128(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) > (II) R128(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 > doublescan +hsync +vsync > (**) R128(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) > (II) R128(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 > doublescan +hsync +vsync > (**) R128(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) > (II) R128(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 > doublescan -hsync -vsync > (**) R128(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) > (II) R128(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 > doublescan -hsync -vsync > (**) R128(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) > (II) R128(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 > doublescan -hsync -vsync > (++) R128(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "shadowfb" > (II) LoadModule: "shadowfb" > (II) Loading /usr/X11R6/lib/modules/libshadowfb.a > (II) Module shadowfb: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) R128(0): Page flipping disabled > (!!) R128(0): For information on using the multimedia capabilities > of this adapter, please see http://gatos.sf.net. > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xa0000000 - 0xa0003fff (0x4000) MS[B] > [1] 0 0 0xa4000000 - 0xa7ffffff (0x4000000) MS[B] > [2] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] > [3] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] > [4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B] > [5] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B] > [6] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B] > [7] -1 0 0x80082000 - 0x80082fff (0x1000) MX[B] > [8] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B] > [9] -1 0 0xa0000000 - 0xa0003fff (0x4000) MX[B](B) > [10] -1 0 0xa4000000 - 0xa7ffffff (0x4000000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) > [14] 0 0 0x00000400 - 0x000004ff (0x100) IS[B] > [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] > [17] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) > [18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmGetBusid returned 'PCI:0:16:0' > drmOpenDevice: minor is 1 > drmOpenDevice: node name is /dev/dri/card1 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 2 > drmOpenDevice: node name is /dev/dri/card2 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 3 > drmOpenDevice: node name is /dev/dri/card3 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 4 > drmOpenDevice: node name is /dev/dri/card4 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 5 > drmOpenDevice: node name is /dev/dri/card5 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 6 > drmOpenDevice: node name is /dev/dri/card6 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 7 > drmOpenDevice: node name is /dev/dri/card7 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 8 > drmOpenDevice: node name is /dev/dri/card8 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 9 > drmOpenDevice: node name is /dev/dri/card9 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 10 > drmOpenDevice: node name is /dev/dri/card10 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 11 > drmOpenDevice: node name is /dev/dri/card11 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 12 > drmOpenDevice: node name is /dev/dri/card12 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 13 > drmOpenDevice: node name is /dev/dri/card13 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 14 > drmOpenDevice: node name is /dev/dri/card14 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenByBusid: busid is PCI:0:16:0 > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenByBusid: drmOpenMinor returns 6 > drmOpenByBusid: drmGetBusid reports PCI:0:16:0 > (II) R128(0): [drm] drmSetBusid failed (6, PCI:0:16:0), Device or resource > busy > (EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI. > (II) R128(0): Memory manager initialized to (0,0) (640,6553) > (II) R128(0): Reserved area from (0,480) to (640,482) > (II) R128(0): Largest offscreen area available: 640 x 6071 > (II) R128(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Dashed Lines > Scanline Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 18 256x256 slots > 7 512x512 slots > (II) R128(0): Acceleration enabled > (==) R128(0): Backing store disabled > (==) R128(0): Silken mouse enabled > (II) R128(0): Using hardware cursor (scanline 964) > (II) R128(0): Largest offscreen area available: 640 x 6067 > (**) Option "dpms" "true" > (**) R128(0): DPMS enabled > (II) R128(0): Direct rendering disabled > (==) RandR enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Keyboard "Generic Keyboard" handled by legacy driver > (**) Option "Protocol" "ImPS/2" > (**) Configured Mouse: Protocol: "ImPS/2" > (**) Option "CorePointer" > (**) Configured Mouse: Core Pointer > (**) Option "Device" "/dev/psaux" > (**) Option "Emulate3Buttons" "true" > (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 > (**) Configured Mouse: Buttons: 5 > (**) Option "Protocol" "ImPS/2" > (**) Generic Mouse: Protocol: "ImPS/2" > (**) Option "SendCoreEvents" "true" > (**) Generic Mouse: always reports core events > (**) Option "Device" "/dev/input/mice" > (**) Option "Emulate3Buttons" "true" > (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Generic Mouse: ZAxisMapping: buttons 4 and 5 > (**) Generic Mouse: Buttons: 5 > (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE) > (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) > (II) Server_Terminate keybinding not found > (II) Configured Mouse: ps2EnableDataReporting: succeeded > (II) Generic Mouse: ps2EnableDataReporting: succeeded > Warning: font renderer for ".pcf" already registered at priority 0 > Warning: font renderer for ".pcf.Z" already registered at priority 0 > Warning: font renderer for ".pcf.gz" already registered at priority 0 > Warning: font renderer for ".snf" already registered at priority 0 > Warning: font renderer for ".snf.Z" already registered at priority 0 > Warning: font renderer for ".snf.gz" already registered at priority 0 > Warning: font renderer for ".bdf" already registered at priority 0 > Warning: font renderer for ".bdf.Z" already registered at priority 0 > Warning: font renderer for ".bdf.gz" already registered at priority 0 > Warning: font renderer for ".pmf" already registered at priority 0 > Could not init font path element unix/:7100, removing from list! > > > > Thanks, > Ashwin. >
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
