I am having problems with USB in my ACER Travelmate
291
I have Debian 3.0r2 instaled in my laptop.
dmesg
Linux version 2.4.18-686 ([EMAIL PROTECTED]) (gcc
version 2.95.4 20011002 (Debian prerelease)) #1 Sun
Apr 14 11:32:47 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 000000001eff0000
(usable)
BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI
data)
BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI
NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000
(reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
On node 0 totalpages: 126960
zone(0): 4096 pages.
zone(1): 122864 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: BOOT_IMAGE=Linux ro root=302
pci=biosirq
Initializing CPU#0
Detected 1398.845 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 495348k/507840k available (811k kernel code,
12104k reserved, 231k data, 212k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7,
524288 bytes)
Inode-cache hash table entries: 32768 (order: 6,
262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536
bytes)
Buffer-cache hash table entries: 32768 (order: 5,
131072 bytes)
Page-cache hash table entries: 131072 (order: 7,
524288 bytes)
CPU: Before vendor init, caps: a7e9fbbf 00000000
00000000, vendor = 0
CPU: L2 cache: 8192K
CPU: L3 cache: 5632K
CPU: After vendor init, caps: a7e9fbbf 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: a7e9fbbf 00000000
00000000 00000000
CPU: Common caps: a7e9fbbf 00000000
00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping
05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1398.8025 MHz.
..... host bus clock speed is 99.9144 MHz.
cpu: 0, clocks: 999144, slice: 499572
CPU0<T0:999136,T1:499552,D:12,S:499572,C:999144>
mtrr: v1.40 (20010327) Richard Gooch
([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xe9824, last
bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [8086/24cc] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch
([EMAIL PROTECTED])
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size
1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan
"Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind
32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2632 blocks [1 disk] into ram disk...
|
done.
Freeing initrd memory: 2632k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 212k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Journalled Block Device driver loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device
f9, VID=8086, DID=24ca
PCI: Device 00:1f.1 not available because of resource
collisions
PCI_IDE: chipset revision 3
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings:
hdc:DMA, hdd:pio
hda: TOSHIBA MK4025GAS, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78140160 sectors (40008 MB), CHS=77520/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL]
[4864/255/63] p1 p2 p3
ext3: No journal on filesystem on ide0(3,2)
Adding Swap: 634556k swap-space (priority -1)
Real Time Clock Driver v1.10e
8139too Fast Ethernet driver 0.9.24
eth0: RealTek RTL8139 Fast Ethernet at 0xdf8ba000,
00:02:3f:14:9d:0d, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik
<[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb-uhci.c: $Revision: 1.275 $ time 11:55:11 Apr 14
2002
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin A of device
00:1d.0.
usb-uhci.c: found UHCI device with no IRQ assigned.
check BIOS settings!
PCI: No IRQ known for interrupt pin B of device
00:1d.1.
usb-uhci.c: found UHCI device with no IRQ assigned.
check BIOS settings!
PCI: No IRQ known for interrupt pin C of device
00:1d.2.
usb-uhci.c: found UHCI device with no IRQ assigned.
check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
eth0: Setting 100mbps full-duplex based on
auto-negotiated partner ability 41e1.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lspci
00:00.0 Host bridge: Intel Corp.: Unknown device 3580
(rev 02)
00:00.1 System peripheral: Intel Corp.: Unknown device
3584 (rev 02)
00:00.3 System peripheral: Intel Corp.: Unknown device
3585 (rev 02)
00:02.0 VGA compatible controller: Intel Corp.:
Unknown device 3582 (rev 02)
00:02.1 Display controller: Intel Corp.: Unknown
device 3582 (rev 02)
00:1d.0 USB Controller: Intel Corp.: Unknown device
24c2 (rev 03)
00:1d.1 USB Controller: Intel Corp.: Unknown device
24c4 (rev 03)
00:1d.2 USB Controller: Intel Corp.: Unknown device
24c7 (rev 03)
00:1d.7 USB Controller: Intel Corp.: Unknown device
24cd (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2)
Chipset PCI (-M) (rev 83)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc
(rev 03)
00:1f.1 IDE interface: Intel Corp.: Unknown device
24ca (rev 03)
00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev
03)
00:1f.5 Multimedia audio controller: Intel Corp.:
Unknown device 24c5 (rev 03)
00:1f.6 Modem: Intel Corp.: Unknown device 24c6 (rev
03)
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc.
OHCI Compliant IEEE 1394 Host Controller (rev 80)
01:01.0 Ethernet controller: Realtek Semiconductor
Co., Ltd. RTL-8139 (rev 10)
01:02.0 Network controller: Intel Corp.: Unknown
device 1043 (rev 04)
01:04.0 CardBus bridge: ENE Technology Inc: Unknown
device 1410 (rev 01)
lspci -vvx
00:00.0 Host bridge: Intel Corp.: Unknown device 3580
(rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit,
prefetchable)
Capabilities: [40] #09 [a105]
00: 86 80 80 35 06 00 90 20 02 00 00 06 00 00 80 00
10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
00:00.1 System peripheral: Intel Corp.: Unknown device
3584 (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 84 35 06 00 80 00 02 00 80 08 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.3 System peripheral: Intel Corp.: Unknown device
3585 (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 85 35 06 00 80 00 02 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.0 VGA compatible controller: Intel Corp.:
Unknown device 3582 (rev 02) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, prefetchable)
[size=128M]
Region 1: Memory at f0000000 (32-bit,
non-prefetchable) [size=512K]
Region 2: I/O ports at e000 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 82 35 07 00 90 00 02 00 00 03 00 00 80 00
10: 08 00 00 b0 00 00 00 f0 01 e0 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00
00:02.1 Display controller: Intel Corp.: Unknown
device 3582 (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at 20000000 (32-bit, prefetchable)
[disabled] [size=128M]
Region 1: Memory at 1f000000 (32-bit,
non-prefetchable) [disabled] [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 82 35 00 00 90 00 02 00 80 03 00 00 80 00
10: 08 00 00 20 00 00 00 1f 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
00:1d.0 USB Controller: Intel Corp.: Unknown device
24c2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1200 [size=32]
00: 86 80 c2 24 05 00 80 02 03 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 12 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:1d.1 USB Controller: Intel Corp.: Unknown device
24c4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1600 [size=32]
00: 86 80 c4 24 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 16 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
00:1d.2 USB Controller: Intel Corp.: Unknown device
24c7 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1700 [size=32]
00: 86 80 c7 24 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 17 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:1d.7 USB Controller: Intel Corp.: Unknown device
24cd (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at f0080000 (32-bit,
non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
00: 86 80 cd 24 06 00 90 02 03 20 03 0c 00 00 00 00
10: 00 00 08 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2)
Chipset PCI (-M) (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset-
FastB2B-
00: 86 80 48 24 07 01 80 80 83 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 d0 80 22
20: 00 e0 f0 ef 00 a0 f0 af 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc
(rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 cc 24 0f 00 80 02 03 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1f.1 IDE interface: Intel Corp.: Unknown device
24ca (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1100 [size=16]
Region 5: Memory at 1f080000 (32-bit,
non-prefetchable) [size=1K]
00: 86 80 ca 24 07 00 80 02 03 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 11 00 00 00 00 08 1f 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev
03)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1400 [size=32]
00: 86 80 c3 24 01 00 80 02 03 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 14 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 02 00 00
00:1f.5 Multimedia audio controller: Intel Corp.:
Unknown device 24c5 (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device
0021
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at e100 [size=256]
Region 1: I/O ports at e200 [size=64]
Region 2: Memory at f0080400 (32-bit,
non-prefetchable) [size=512]
Region 3: Memory at f0080600 (32-bit,
non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 c5 24 07 00 90 02 03 00 01 04 00 00 00 00
10: 01 e1 00 00 01 e2 00 00 00 04 08 f0 00 06 08 f0
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 21 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00
00:1f.6 Modem: Intel Corp.: Unknown device 24c6 (rev
03) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at e300 [size=256]
Region 1: I/O ports at e400 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 c6 24 05 00 90 02 03 00 03 07 00 00 00 00
10: 01 e3 00 00 01 e4 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc.
OHCI Compliant IEEE 1394 Host Controller (rev 80)
(prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns max), cache line size 04
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0001800 (32-bit,
non-prefetchable) [size=2K]
Region 1: I/O ports at c100 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 44 30 87 00 10 02 80 10 00 0c 04 80 00 00
10: 00 18 00 e0 01 c1 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 20
01:01.0 Ethernet controller: Realtek Semiconductor
Co., Ltd. RTL-8139 (rev 10)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at e0001000 (32-bit,
non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 80 00 00
10: 01 c0 00 00 00 10 00 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 3d 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
01:02.0 Network controller: Intel Corp.: Unknown
device 1043 (rev 04)
Subsystem: Intel Corp.: Unknown device 2527
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 8500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit,
non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
00: 86 80 43 10 06 00 90 02 04 00 80 02 00 80 00 00
10: 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 27 25
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 02 22
01:04.0 CardBus bridge: ENE Technology Inc: Unknown
device 1410 (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device
003d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 1f081000 (32-bit,
non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05,
sec-latency=176
Memory window 0: 1f400000-1f7ff000 (prefetchable)
Memory window 1: 1f800000-1fbff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+
16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00: 24 15 10 14 07 00 10 02 01 00 07 06 08 a8 02 00
10: 00 10 08 1f a0 00 00 02 01 02 05 b0 00 00 40 1f
20: 00 f0 7f 1f 00 00 80 1f 00 f0 bf 1f 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 25 10 3d 00 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I have tried adding pci=biosirq to the /etc/lilo.conf
with no success.
I have read in
http://david.dpitts.com/archives/000012.html that this
is a problem
with the BIOS. Some have overcome the problem
switching off the BIOS Plug&Play OS Setting to No.
But my BIOS menu does not have this option to switch
it off.
Any help will be greatly appreciated.
Best Regards,
Aitor
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
