Thanks to everyone that has replied, I greatly appreciate your replies, however the messages are getting confused.
I have reposted this to try and clear things up a little.
I do not have usb-ohci installed. I am running an Asus laptop with Intel chipset and using usb-uhci
My lsmod shows: zeus:/home/ben# lsmod Module Size Used by Not tainted orinoco_cs 4372 1 mousedev 3832 1 nls_cp437 4348 2 (autoclean) usb-uhci 21804 0 (unused) asus_acpi 7676 0 thermal 6432 0 (unused) processor 8780 0 [thermal] fan 1568 0 (unused) button 2508 0 (unused) battery 5856 0 (unused) ac 1792 0 (unused) microcode 3424 0 (unused) msr 1640 0 (unused) cpuid 1224 0 (unused) radeonfb 22636 0 (unused) fbcon-cfb8 3336 0 [radeonfb] fbcon-cfb24 4200 0 [radeonfb] fbcon-cfb16 3912 0 [radeonfb] fbcon-cfb32 3752 0 [radeonfb] hid 16836 0 (unused) usbcore 58368 1 [usb-uhci hid] i810_audio 24968 1 ac97_codec 12076 0 [i810_audio] orinoco 33036 0 [orinoco_cs] hermes 5252 0 [orinoco_cs orinoco] busmouse 3260 0 (unused) input 3488 0 [mousedev]
As you can see only mousedev is using input what have I done wrong??!!
Jason Kraftcheck wrote:
Shyamal Prasad wrote:
"Bob" == Bob Proulx <[EMAIL PROTECTED]> writes:
Bob> ben wrote: >> if i enter modconf on my latest compile no usbmouse shows up, >> however if i lsmod it appears. I am still not sure if this is >> the problem as my kernel 2.4.18 (bf24) has this module loaded >> and the mouse works, but I am willing to try anything at this >> stage!
Bob> For USB mice and a modular kernel I have found experimentally Bob> that I need to load the following two drivers.
Bob> echo hid >> /etc/modules Bob> echo mousedev >> /etc/modules
Bob> modprobe hid modprobe mousedev
Bob> With these loaded everything works fine for me.
There was a time I actually understood the USB subsystem (two years ago or so). Now all I do is
- use a stock Debian woody kernel (2.4.18-{k7|686}) in my case) - apt-get install hotplug
and it all works pretty much by itself. With my USB keyboard and mouse I see
$ /sbin/lsmod | grep usb usbkbd 2944 0 (unused) usbmouse 1792 0 (unused) input 3424 0 [keybdev usbkbd mousedev hid usbmouse] usb-uhci 21508 0 (unused) usbcore 49696 1 [usbkbd hid usbmouse usb-uhci]
You don't need usbkdb or usbmouse. For USB mouse and keyboard support you should have:
usbcore
usb-[ou]hci
input
hid
mousedev
keybdev
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
