hello :) trying to get an Abocom FE-2500-MX working specs: http://www.w-linx.com.tw/products/pcmcia/cardbus.htm
tuxmobil says they are supported: http://tuxmobil.org/pcmcia_ci10333.html running debian woody pcmcia-cs version 3.1.33-6woody1 loads without any trouble an d-link 650 wlan card, but i have no success with aboves card. # cardctl status Socket 0: 3.3V CardBus card function 0: [ready] # cardctl ident Socket 0: product info: "CardBus", "Fast Ethernet", "V1.0", "" manfid: 0x13d1, 0xab02 function: 6 (network) # lspci -v -s 2: 02:00.0 Ethernet controller: Abocom Systems Inc: Unknown device ab08 (rev 11) Subsystem: Abocom Systems Inc: Unknown device ab08 Flags: medium devsel, IRQ 11 I/O ports at 4000 [size=256] Memory at 20000000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 1fc00000 [size=128K] Capabilities: [c0] Power Management version 2 syslog when putting the card in: Jul 29 16:09:31 sputnik cardmgr[1296]: socket 0: CardBus hotplug device Jul 29 16:09:31 sputnik /etc/hotplug/pci.agent: ... no modules for PCI slot 02:00.0 and out: Jul 29 16:09:24 sputnik /etc/hotplug/pci.agent: PCI remove event not supported i've tried to add to /etc/pcmcia/config.opt card "Abocom FE-2500-MX" # version "CardBus", "Fast Ethernet", "V1.0", "" manfid: 0x13d1, 0xab02 bind "xircom_tulip_cb" "I have this listed as an ADMtek chip in a card manufactured Abocom." donald becker -> http://www.tux.org/hypermail/linux-tulip/2003-Mar/0006.html # grep PCMCIA /boot/config-2.4.21.030729 # PCMCIA/CardBus support CONFIG_PCMCIA=y # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # PCMCIA SCSI adapter support # CONFIG_SCSI_PCMCIA is not set CONFIG_PCMCIA_HERMES=m # PCMCIA network device support CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set # CONFIG_PCMCIA_FMVJ18X is not set CONFIG_PCMCIA_PCNET=m # CONFIG_PCMCIA_AXNET is not set # CONFIG_PCMCIA_NMCLAN is not set # CONFIG_PCMCIA_SMC91C92 is not set CONFIG_PCMCIA_XIRC2PS=m # CONFIG_PCMCIA_IBMTR is not set CONFIG_PCMCIA_XIRCOM=m CONFIG_PCMCIA_XIRTULIP=m # CONFIG_NET_PCMCIA_RADIO is not set # PCMCIA character devices CONFIG_PCMCIA_SERIAL_CS=m with my working dwl-650 syslog says: Jul 29 15:51:07 sputnik cardmgr[1296]: socket 0: D-Link DWL-650 Jul 29 15:51:07 sputnik cardmgr[1296]: executing: 'modprobe hermes' Jul 29 15:51:07 sputnik cardmgr[1296]: executing: 'modprobe orinoco' Jul 29 15:51:07 sputnik cardmgr[1296]: executing: 'modprobe orinoco_cs' Jul 29 15:51:08 sputnik /etc/hotplug/net.agent: invoke ifup eth1 Jul 29 15:51:08 sputnik cardmgr[1296]: executing: './network start eth1' Jul 29 15:55:49 sputnik cardmgr[1296]: executing: './network stop eth1' Jul 29 15:55:49 sputnik cardmgr[1296]: executing: 'modprobe -r orinoco_cs' Jul 29 15:55:50 sputnik cardmgr[1296]: executing: 'modprobe -r orinoco' Jul 29 15:55:50 sputnik cardmgr[1296]: executing: 'modprobe -r hermes' Jul 29 15:55:50 sputnik /etc/hotplug/net.agent: invoke ifdown eth1 thx for help || pointers, would like to get this card working, a++ maks
pgp00000.pgp
Description: PGP signature
