On Saturday 19 July 2003 01:15, Dan wrote: > > I've seen some messages about the Linksys WPC11 wireless pcmcia NIC, > > wether to use the prims2_cs driver or the orinoco_cs driver... > > I got one of those cards > > > I've got such a card too, and am trying to get it running... with or > > without WEP, currently without, being I cannot get it to work... > > I've read the wlan howto, read the docs in wireless-tools, but I am > > stuck... > > Never gotten WEP to work :( but without it I just insert card and the > following load orinoco_cs > orinoco > hermes > works like a charm
Tried with Knoppix 3.2 which has a 2.4.20 kernel... by itself it loaded the prism2_cs driver... removed it and tried the orinoco_cs, ... modules you mentioned, but I do not get an interface... which confirms your experience... I've tried to run Debian unstable with the 2.4.18-686 kernel, but still no eth1 interface... I do have a eth0, but that one is for the ethernet card, AFAIK... > > here is some versioning: > > > > wireless-tools 25-3 > > kernel-image-... 2.4.20-7 > > kernel-pcmcia-... 2.4.20-7 > > my wireless-tools are 26-1 and my kernel is custom 2.4.18 > funny I have a 2.4.20 and 2.4.21 custom kernels but my card doesn't get an > eth0 is still I see > cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff > 0xf0000-0xfffff orinoco_cs: RequestIRQ: Resource in use > no matter what I do. Tried searching for a solution but never found one > but I keep my 2.4.18 so I have wireless. Loading the orinoco_cs module never gives errors... on neither 2.4.18 or 2.4.20... Do you know some sources of information, i.e. programs that can figure out statuses of things? Egon Egon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
