Schaymal, thanks that does seem to do the trick ...
Cheers, Mariano On Tue, 2003-04-01 at 16:08, Shyamal Prasad wrote: > "mkamp" == mkamp <[EMAIL PROTECTED]> writes: > > mkamp> When booting the wlan card is not recognized and so > mkamp> dhcpclient doesn't get any address during boot. A cardctl > mkamp> eject; cardctl insert does "solve" the problem. > > If you have the 'auto' stanza in /etc/network/interfaces for the card > device (e.g. 'auto eth0') then you will see this happen. In that case, > take out the auto stanza. > > For PCMCIA NICs you must let the PCMCIA startup script bring up the > card and not the networking script. The latter processes the auto > stanza, and it also runs *before* the PCMCIA script which is why you > can't use 'auto.' > > Cheers! > Shyamal > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
