I think you should enable scsi-emulation in the kernel for this to work. -->negon
On Wed, 2003-02-05 at 12:59, Florian Reichert wrote: > Hello! > > I have a SanDisk PC Card Adapter for CompactFlash Cards. I rember that > this Card has been working without any problems with mdk. > > But now with debian it doesn't work. > > In woody I added the following to my /etc/pcmcia/config: > card "Anonymous Memory" > anonymous > bind "ide-cs" > ^^^^^^^ > Before I change that ther was: bind "memory_cs" And the Card was > recogniced as Anonymous MemoryCard. > > But now I get that error: > [from the HOWTO] > | Or alternately: > | * All card insertions generate a high beep followed by a low beep. > | * All cards are identified as ``anonymous memory cards''. > | * The system log reports that various memory ranges have been > | excluded. > And nothing happens. > > In the config.opt it says: > ---------------------------- > |# System resources available for PCMCIA devices > | > |# Dell Notebooks freeze if something between 0x810-0x81f is included! > |include port 0x100-0x4ff, port 0x800-0x80f, port 0x820-0x8ff, port 0xc00-0xcff > | > |include memory 0xc0000-0xfffff > |include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff > | > |# High port numbers do not always work... > |# include port 0x1000-0x17ff > ---------------------------- > > According to the Howto I had a look in the Windows System Manager but > don't know how to apply what I found there: > > There was at firts one entry for "PCMCIA Kartendienste" (may be > Cardmanager in english) > 05040000 - 05040FFF > additional there where to entries Toshiba ToPIC95 CardBus > both IRQ11 > one 05031000 - 05031FFF > the other 05030000 - 05030FFF > > How do I have to change my settings? > > Thanks for Help! > > Florian > > P.S. my Cardbus Nic works. > > > > -- > Florian Reichert > Please notice: e-mails to my adress [EMAIL PROTECTED] must not be larger > than 5 k, because they will be filtered else. If you would like to send > anny larger e-mail to me pleas ask for alternative Contact! > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
