Mark Janssen wrote: >On Thu, 2002-09-26 at 14:00, Paulo Lopes wrote: > > >>Can someone "teach" me how to configure the IrDA for my laptop? I own a >>Clevo 2700C and according to the manual the IR port is: >> >> > >I've just played with this on my 2700C last week (to get my palm to sync >over irda) > >Make sure the bios settings for IR are as follows (won't work in other >modes) > >HPSIR/FAST-IR >COM-2 (2F8, IRQ 3, DMA 3) > >It should then be usable from /dev/ircomm0 or /dev/ircomm1. > >Using irdadump you should see packets going across when you put an >IR-capable device (palm/phone/other laptop) in front of it.. > > I've checked my BIOS settings and choosed FAST-IR COM-2 (2F8, IRQ3, DMA 3)
i've started "irdadump" and in another "window" i've tryed "minicom /dev/ircomm0" (the phone was connected with the irda link) and nothing happend on irdadump, and on minicom the status was offline. Then i tryed minicom /dev/ircomm1 -> it returned /dev/ttyS1 is locked i've listed the modules, "lsmod" and here's the dump: Module Size Used by Not tainted sis 48320 2 irtty 5472 1 (autoclean) ircomm-tty 18816 1 (autoclean) ircomm 7068 0 (autoclean) [ircomm-tty] irda 78284 1 (autoclean) [irtty ircomm-tty ircomm] usb-ohci 17728 0 (unused) usbcore 47840 1 [usb-ohci] agpgart 12416 3 sis900 12036 1 af_packet 11560 0 rtc 5528 0 (autoclean) i've cheched the ifconfig and there were a irda0 entry, i've stopped it with "ifconfig irda0 down" and tryed to remove the modules but they don't move out (don't know why)... and every time i try the minicom doesn't work... Paulo Lopes. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
