Hello everybody,
I have an external isnd usb modem "minivigor128 isdn ta", produced by
draytek, and the driver (called miniVigor128-V1.0-2-for-2.4.0.i386.rpm)
is available at the producer's site. I'm using debian so I converted
the package into deb format with alien. I've recompiled the kernel with
usb support, and installed usbutils, usbmrg and the modem driver, but it
doesn't work. It should work with the device /dev/ttyUSB0 , but
nothing's working. Also the directory /proc/bus/usb doesn't exist. When
I insert the usb port in the computer I've this messagge:
hub.c: USB new device connect on bus1/1, assigned device number 2 :
usb.c: USB device 2 (vend/prod 0x675/0x6694) is not claimed by any
active driver.
I'm using debian woody with kernel 2.4.17 on a laptop "compaq presario
1800 xl 186", and doing "cat /proc/pci" I've this:
Bus 0, device 7, function 2:
USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0x1480 [0x149f].
Any suggestion?
Thanks and by
InSa
Ps: sorry for my bad English but I'm not native speaker...
--
-------------------------------------------------
System powered by Debian GNU/Linux Woody
Kernel 2.4.17 on a Laptop
-------------------------------------------------
Who said that winmodem doesn't work with linux?!?
-------------------------------------------------
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
