On Mon, 3 Sep 2001, Michael Thaler wrote:
>
> [snipped]
>
> tulip_attach(device 02:00.0)
> tulip.c:v0.91g-ppc 7/16/99 [EMAIL PROTECTED] (modified by
>[EMAIL PROTECTED] for XIRCOM CBE, fixed by Doug Ledford)
> eth0: Digital DS21143 Tulip rev 65 at 0x280, 00:E0:29:47:D4:54, IRQ 9.
> eth0: EEPROM default media type Autosense.
> eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
> eth0: MII transceiver #1 config 3000 status 7809 advertising 00a1.
> eth0: Advertising 01e1 on PHY 1, previously advertising 00a1.
> eth0: Advertising 01e1 (to advertise is 01e1).
> tulip_detach(eth0)
> cs: cb_disable(bus 2)
> cs: cb_release(bus 2)
> cs: cb_free(bus 2)
>
> Everything looks fine but when I try to ping another computer on the
> network it does not work, even though it works with my other card. The
> network is o.k.
>
apart from the last 4 lines that actually are (more or less) ejecting the
card the instant it loads up!
I'm unsure howevr to fix it however I would 'apt-get install pcmcia-cs'
and then 'dpkg --remove pcmcia-cs' straight afterwards. This leaves in
all the scripts etc, this is where I think the problem is, howver I could
be wrong :)
Alex
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
