On Tue, 21 Aug 2001, Jim Richardson wrote:
> I have a no-name pcmcia card, which works fine with linux, all I did was
> add the following line to the /etc/fstab
>
> /dev/hde1 /media/smart vfat noauto,user,exec 0 0
>
> and things seem to work fine. Course, the camera works fine via the USB
> port too, (Fujitsu 4700)
>
> If the card beeps twice after inserting the media cart, then it should
> work, may take a little figureing to find out what device it is listed
> as. (Mine, and I suspect this is the standard, pretends to be an IDE
> drive. Hence the hde bit.)
Right, it seems I need to check out my PCMCIA setup. My NIC is an integrated
mini-pci one, which works fine but does not use PCMCIA. When I insert the card
there is no sound and my GKrellM plugin thinks the slots are empty. It does
mount as another drive under 'doze, so if I get PCMCIA sorted then I should be
up and running. Thanks for that, it seems likely I am not on a hopeless quest.
Get PCMCIA and sound sorted on my C600 and I'll be a happy bunny :-)
---
Paul Tansom: Talking to penguins can be inTUXicating, whereas
talking to windows is only 1 step away from talking to the wall!
---
Smoothwall firewall/router project: http://www.smoothwall.org/
Smoothwall project community contact: [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
