i have a big problem with setserial. when i first install debian, everything works well. the only anomoly is after the first reboot i have to run pppconfig again because modem changes from /dev/ttyS1 tp /dev/ttyS2. When i upgrade to a 2.4.x kernel, it again changes to /dev/tttyS4. But my problem is when i install a new version of setserial. When I do, pppconfig is unable to find the modem. Debconf gives three choices when configuring it initially: 1) Auto-save Once 2) Autosave Always 3) Kernel Settings I've tried all three without success. Always after the first shutdown after upgrading setserial, the modem is non-findable with a pppconfig auto-probe. Nor does it work if i manually set the /dev. I've tried manually setting the setserial parameters to what they are when they work, it doesnt help. I've tried reverting back to the original version of setserial. I've tried a new kernel build and pcmcia-cs build. I dont know what i can do. Maybe someone here can help. __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
