On Thursday 31 May 2001 05:40, Pedro "I." Sanchez wrote:
> While on an X session, and if connected to an external monitor, I can
> switch the video output to either the flat panel (LCD) OR to the
> external monitor by pressing Fn-F7 (this is the CRT/LCD switch function)
> but not to both devices simultaneously.This quite annoying to me when
> doing presentations.
>
> I dual boot this laptop with Window NT. When running NT, Fn-F7 cycles
> the video output as LCD--CRT--LCD/CRT--LCD--CRT--LCD/CRT..., so I know
> the laptop can drive both video outputs simultaneously. Also, I just
> noticed that selecting "Full Screen" mode in VMware while running in CRT
> mode switches the display to both LCD and CRT simultaneously!
That is very strange. What version of the kernel do you use? Do you use the
frame-buffer device?
I used to have a problem on my Thinkpad T20 with X server version <=4.0.2
which meant that Fn-F7 would do nothing at all if I was in X. This was very
strange because I could switch to a console and Fn-F7 would work perfectly.
At the time I was using the FBDEV X server, so having two FB applications
operating in different ways was quite weird.
I am not certain that my problem was solved by upgrading the X server, I was
also tracking the new kernels at the time and it could have been a kernel
upgrade. It works fine now with kernel 2.4.4 but broke with ~2.4.0.
I hope this helps your investigation.
--
http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/ Postal SMTP/POP benchmark
http://www.coker.com.au/projects.html Projects I am working on
http://www.coker.com.au/~russell/ My home page
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
