> Hi,
>
> I have trouble getting the Netgear FA510 Cardbus Fast Ethernet Card to
> work. While "cardctl ident" reports the correct card I cannot ping
> another computer connected via a cross over cable (but it works in W2k).
> I attached some data below.
>
> I appreciate any suggestion,
>
> Felix
In the working configuration under win2k... you can see the routes
that get established for your cross connect? (in w95/w98 it was
Open an MSDOS Prompt
route print
but, you may have some other method now, I dunno.)
Under the debian setup, route -n should reveal the routes that you're
trying to establish this time.
I notice that your box is .5 and the other box is .1 for its range...
that's fine... but you may need to have the other machine's idea of a
default route come to .5, probably not a default setting. Almost no
traffic (funny thing that :/ ) so I snipped that part.
I use cross connects for installfests and other fast-transfer needs,
so I do them a *lot*...
Do you get no pings at all, or they are disgustingly slow? Is the
other one able to ping you, putzy-as-glaciers, or no response? (Hmm,
you might not be able to tell if it would be the middle one, MSwin's
ping timeout is rather short.)
> The data:
>
> > lsmod (after removing the sound card modules)
your lsmod looked fine to me.
> > cardctl ident
> Socket 0:
> product info: "NETGEAR", "FA510", "Fast Ethernet CardBus Card", "1.00"
> manfid: 0x9513, 0x0081
> function: 6 (network)
> PCI id: 0x1011, 0x0019
>
> > ifconfig (on the laptop)
> eth0 Link encap:Ethernet HWaddr 00:10:7A:15:B8:E1
> inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Interrupt:3 Base address:0x100
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
>
> > ifconfig (on the connected computer)
> eth0 Link encap:Ethernet HWaddr 00:0A:66:3C:F9:43
> inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Interrupt:5 Base address:0xb000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
