Hello all,
I am a unix admin of about 4 years doing mostly Solaris, AIX, and RH based
linux distributions (and a little OpenBSD). In an effort to diversify my
platfom base, I decided to install Debian. Not one to do things the easy
way, I decided to install this on my laptop! =)
I downloaded the pieces and built the 2.2r2 iso disk1. I was able to boot
and install the os. It auto detected my Xircom CardBus Ethernet 100 + Modem
56 (Ethernet Interface) but then when I stepped through the ip configuration
it failed. I also have a port replicator that I primarily use. It has a
3com 3c920 which is suppossed to be compatable with 3c905C-TX, which I
should be able to use the 3c90X driver. I tried to do a insmod and it could
not find it.
I also could not get the X system to install correctly. Apparently the card
is an ATI Mobility M1 which I should use a Mach64 driver for. However, I am
used to running Xconfigurator, which I believe is a RedHat util. But, I
think that I am going to try and get X 4.02 running instead of the version
that comes with D2.2r2.
Any help out there??
Thanks!!
Jeremy
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
