Dear all,
I've got a pcmcia ethernet+modem card which I'm trying hard to setup with
very poor outcome:
> ifconfig eth0
eth0: error fetching interface information: Device not found
Here is some debug output.
Does anyone out there see what I'm doing wrong?
Thanks very much.
Alberto.
=========================== Debug info =========================
>lsmod
Module Size Used by
serial_cs 5376 0 (unused)
ds 6536 2 [serial_cs]
i82365 28516 2
pcmcia_core 44416 0 [serial_cs ds i82365]
> cardctl config
Socket 0:
Vcc 5.0V Vpp1 0.0V Vpp2 0.0V
interface type is "memory and I/O"
irq 3 [exclusive] [level]
Speaker output is enabled
function 0:
config base 0x0800
option 0x61 status 0x08
io 0x13f8-0x13ff [8bit]
Socket 1:
not configured
> cardctl info
Socket 0:
product info: "Xircom", "CreditCard Ethernet+Modem II", "CEM2", "1.00"
manfid: 0x0105, 0x110a
function: 2 (serial)
Socket 1:
no product info available
> cat /var/run/stab
Socket 0: Xircom CE II Ethernet/Modem
0 serial serial_cs 0 ttyS2 4 66
Socket 1: empty
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
