Hi There:
I'm using Debian 2.2 with 3Com but the idea is the
same...
1. Make sure you have installed the pcmcia package.
You can check by looking for /etc/init.d/pcmcia folder
and /etc/pcmcia.
2. To set up the IP, edit /etc/pcmica/networks.opt and
fill in the IP address, netmask, network, broadcast
DNS, gateway.
3. Restart the pcmcia script by running
/etc/init.d/pcmcia restart
Hope that works for you :-)
Tony
--- Andrew D Dixon <[EMAIL PROTECTED]>
wrote:
>
>
> ATTACHMENT part 2 message/rfc822
> Date: Fri, 27 Oct 2000 11:14:15 +0200
> From: Andrew D Dixon <[EMAIL PROTECTED]>
> Reply-to: [EMAIL PROTECTED]
> To: "[EMAIL PROTECTED]"
> <[EMAIL PROTECTED]>
> Subject: pcmcia ethernet card
>
> Hi all,
> I'm trying to install a Netgear model FA 510 eternet
> card on my laptop.
> Right now the laptop has just go the Slink base
> system on it and once I
> get the ethernet card working I'll install all the
> other packages I
> need.
>
> I went through the network configuration in the
> install but it doesn't
> seem to work. when I try to ping another machine on
> the network:
>
> >ping 192.168.1.1
>
> I get the responce
>
> ping: sendto: Network is unreachable
> ping: wrote 192.168.1.1 64 chars, ret=-1
>
> also, when I try to configure eht0 with ifconfig:
>
> >ifconfig eth0
>
> I get,
>
> eth0: unknown interface.
>
> Any ideas? I'm new to networking and pcmcia devices
> to so if you could
> point me to any documentation I should read I'd
> appreciate it.
>
> thanks,
> Andy
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
