Does anyone have detailed info on how to get a 3CCFE575BT-D card working *properly* ? The card works fine and dandy, but in several situations (such as at home on a 3com Office Connect 3C16700 hub, etc.) the card seems to having problems that cause the following to be sent to the console. eth0: Tx Ring full, refusing to send buffer eth0: Transmit timed out, tx_status 00 status e000. After this, the connection goes dead. If I try and manually bounce the card, it errors for a few minutes, then comes back fine. If I plug into other networks, there is no problem. I've found a few references on the matter, such as performing the mii-diag program from http://www.scyld.com/network/index.html which came back without problems. Here's the output of a ``cardctl ident'' Socket 0: no product info available Socket 1: product info: "3Com Corporation", "3CCFE575BT", "LAN Cardbus Card", "001" manfid: 0x0101, 0x5157 function: 6 (network) This machine was just installed last night -- 06/Sep/2000 from the stable tree. Any help would be greatly appreciated. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
