--- Begin Message ---
Package: src:linux
Version: 3.16.7-ckt4-1
Severity: normal
Dear Maintainer,
I recently purchased a PCIe DVB tuner advertised as a
Hauppauge WinTV-HVR-2250
However, what was in the box was actually a more recent revision of the
hardware known as a:
Hauppauge WinTV-HVR-2255
Looking at my kernel log though, it appears this new device is
unsupported at the time of this writing. I would much appreciate it if
support could be added for this newer hardware. Please let me know if
there's anything I can do to help with the process
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-1 (2015-01-16)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/hafx-root ro
** Not tainted
** Kernel log:
[ 3.924837] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 3.927200] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 3.927381] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.927416] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 3.927445] snd_hda_intel 0000:01:00.1: irq 100 for MSI/MSI-X
[ 3.927489] snd_hda_intel 0000:06:00.1: enabling device (0000 -> 0002)
[ 3.927521] snd_hda_intel 0000:06:00.1: Handle VGA-switcheroo audio client
[ 3.932961] snd_hda_intel 0000:06:00.1: irq 101 for MSI/MSI-X
[ 3.933085] sp5100_tco: PCI Revision ID: 0x42
[ 3.933111] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 3.933121] sp5100_tco: Last reboot was not triggered by watchdog.
[ 3.933201] sp5100_tco: initialized (0xffffc900018bab00). heartbeat=60 sec
(nowayout=0)
[ 3.942836] saa7164 driver loaded
[ 3.942886] saa7164 0000:05:00.0: enabling device (0000 -> 0002)
[ 3.942947] saa7164[0]: Your board isn't known (yet) to the driver.
saa7164[0]: Try to pick one of the existing card configs via
saa7164[0]: card=<n> insmod option. Updating to the latest
saa7164[0]: version might help as well.
[ 3.942947] saa7164[0]: Here are valid choices for the card=<n> insmod
option:
[ 3.942948] saa7164[0]: card=0 -> Unknown
[ 3.942948] saa7164[0]: card=1 -> Generic Rev2
[ 3.942949] saa7164[0]: card=2 -> Generic Rev3
[ 3.942949] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250
[ 3.942950] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200
[ 3.942950] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200
[ 3.942951] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200
[ 3.942951] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250
[ 3.942952] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250
[ 3.942952] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200
[ 3.942953] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200
[ 3.942986] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown
[card=0,autodetected]
[ 3.942989] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency:
0, mmio: 0xfe000000
[ 3.943011] saa7164_initdev() Unsupported board detected, registering
without firmware
[ 3.962011] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input10
[ 3.962255] input: HD-Audio Generic HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input11
[ 3.962366] input: HD-Audio Generic HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input12
[ 3.962515] input: HD-Audio Generic HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input13
[ 3.962599] input: HD-Audio Generic HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input14
[ 3.962673] input: HD-Audio Generic HDMI/DP,pcm=11 as
/devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input15
[ 3.962786] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 3.962884] input: HD-Audio Generic HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 3.965282] input: HD-Audio Generic HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[ 3.965483] input: HD-Audio Generic HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
[ 3.965727] input: HD-Audio Generic HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
[ 3.965893] input: HD-Audio Generic HDMI/DP,pcm=11 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21
[ 3.969527] AVX version of gcm_enc/dec engaged.
[ 3.979538] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.981777] pstore: Registered efi as persistent store backend
[ 3.984908] sound hdaudioC0D0: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0) type:line
[ 3.984910] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.984911] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.984911] sound hdaudioC0D0: mono: mono_out=0x0
[ 3.984912] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 3.984913] sound hdaudioC0D0: inputs:
[ 3.984914] sound hdaudioC0D0: Front Mic=0x19
[ 3.984915] sound hdaudioC0D0: Rear Mic=0x18
[ 3.984916] sound hdaudioC0D0: Line=0x1a
[ 3.997281] alg: No test for crc32 (crc32-pclmul)
[ 4.001646] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 4.002757] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 4.003766] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input24
[ 4.003774] asus_wmi: ASUS WMI generic driver loaded
[ 4.005701] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input25
[ 4.005760] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input26
[ 4.005820] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input27
[ 4.005879] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input28
[ 4.005938] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input29
[ 4.011731] asus_wmi: Initialization: 0x0
[ 4.012685] asus_wmi: BIOS WMI version: 0.9
[ 4.013881] asus_wmi: SFUN value: 0x0
[ 4.014962] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input30
[ 4.017849] asus_wmi: Disabling ACPI video driver
[ 4.024230] kvm: Nested Virtualization enabled
[ 4.024235] kvm: Nested Paging enabled
[ 4.045638] Adding 16674812k swap on /dev/mapper/hafx-swap_1. Priority:-1
extents:1 across:16674812k SSFS
[ 4.093650] EXT4-fs (sda2): mounting ext2 file system using the ext4
subsystem
[ 4.098103] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 4.114808] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 6.253436] systemd-journald[250]: Received request to flush runtime journal
from PID 1
[ 6.311264] Bridge firewalling registered
[ 6.316160] device eth0 entered promiscuous mode
[ 6.322403] r8169 0000:0a:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168f-1.fw
[ 6.431041] r8169 0000:0a:00.0 eth0: link down
[ 6.434675] r8169 0000:0a:00.0 eth0: link down
[ 6.438291] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.442172] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 8.649762] r8169 0000:0a:00.0 eth0: link up
[ 8.653265] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.657295] xenbr0: port 1(eth0) entered forwarding state
[ 8.660793] xenbr0: port 1(eth0) entered forwarding state
[ 8.664299] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 9.195851] RPC: Registered named UNIX socket transport module.
[ 9.197274] RPC: Registered udp transport module.
[ 9.198711] RPC: Registered tcp transport module.
[ 9.200101] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.207102] FS-Cache: Loaded
[ 9.216215] FS-Cache: Netfs 'nfs' registered for caching
[ 9.231359] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 10.176046] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.694304] xenbr0: port 1(eth0) entered forwarding state
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2501
board_vendor: ASUSTeK COMPUTER INC.
board_name: SABERTOOTH 990FX R2.0
board_version: Rev 1.xx
** Loaded modules:
xt_multiport
iptable_filter
ip_tables
x_tables
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
bridge
stp
llc
nls_utf8
nls_cp437
vfat
fat
kvm_amd
kvm
eeepc_wmi
asus_wmi
crc32_pclmul
sparse_keymap
ghash_clmulni_intel
rfkill
efi_pstore
video
snd_hda_codec_realtek
mxm_wmi
aesni_intel
snd_hda_codec_generic
aes_x86_64
lrw
snd_hda_codec_hdmi
gf128mul
saa7164
glue_helper
ablk_helper
tveeprom
cryptd
psmouse
sp5100_tco
snd_hda_intel
dvb_core
serio_raw
pcspkr
efivars
snd_hda_controller
joydev
evdev
v4l2_common
snd_hda_codec
i2c_piix4
videodev
snd_hwdep
media
edac_mce_amd
snd_pcm
snd_timer
fam15h_power
snd
k10temp
edac_core
soundcore
shpchp
tpm_infineon
i2c_core
tpm_tis
acpi_cpufreq
tpm
button
wmi
processor
thermal_sys
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_generic
ohci_pci
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
ohci_hcd
ehci_pci
libahci
xhci_hcd
ehci_hcd
r8169
libata
mii
usbcore
usb_common
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI
bridge (external gfx0 port B) [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory
Management Unit (IOMMU) [1002:5a23]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory
Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 72
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fdc00000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01
[AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8436]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC
host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=08, subordinate=08, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI2 Controller [1002:4399]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Prefetchable memory behind bridge: 00000000d0300000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to
PCI bridge (PCIE port 2) [1002:43a2] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to
PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Tonga PRO [Radeon R9 285] [1002:6939] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:e306]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at fea00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at fea40000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device
[1002:aad8]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aad8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 100
Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA
Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA
Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 91
Region 0: I/O ports at c050 [size=8]
Region 1: I/O ports at c040 [size=4]
Region 2: I/O ports at c030 [size=8]
Region 3: I/O ports at c020 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7164
[1131:7164] (rev 81)
Subsystem: Hauppauge computer works Inc. Device [0070:f111]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at fdc00000 (64-bit, non-prefetchable) [size=4M]
Capabilities: <access denied>
Kernel driver in use: saa7164
06:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Tonga PRO [Radeon R9 285] [1002:6939] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:e306]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at a0000000 (64-bit, prefetchable) [disabled]
[size=256M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [disabled] [size=2M]
Region 4: I/O ports at b000 [disabled] [size=256]
Region 5: Memory at fe600000 (32-bit, non-prefetchable) [disabled]
[size=256K]
Expansion ROM at fe640000 [disabled] [size=128K]
Capabilities: <access denied>
06:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device
[1002:aad8]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aad8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 101
Region 0: Memory at fe660000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
0a:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 73
Region 0: I/O ports at a000 [size=256]
Region 2: Memory at d0304000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0300000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
0b:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
0c:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 09eb:0131 IM Networks, Inc.
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 09eb:0131 IM Networks, Inc.
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.118
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi 2.02~beta2-20
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
ii xen-hypervisor-4.4-amd64 [xen-hypervisor] 4.4.1-6
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
--- End Message ---
