Package: src:linux
Version: 4.0.2-1
Severity: normal
Since kernel version 4.0 (also the previous 4.0.0-trunk from
experimental) if i try to switch to a VT from an X session (also from
the login manager), the screen becomes black and i'm not able to
recover from that situation, neither for the X session.
That's always reproducible and i wasn't able to find a workaround.
After that you can observe:
- the system is not freezed and you can work blindly.
- the display shows no output but is powered on: the backlight is on and
i can change its brightness.
After a reboot, looking in the log i always find two message like those:
-----
mag 21 07:35:40 etna kernel: [drm:intel_set_cpu_fifo_underrun_reporting [i915]]
*ERROR* uncleared fifo underrun on pipe A
mag 21 07:35:40 etna kernel: [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe
A FIFO underrun
-----
So it looks like an Intel specific bug.
This is an Asuspro PU301LS notebook, with Haswell i7 4500U and HD4400.
I had suspected for the "acpi_osi=" kernel parameter that i use to make
the backlight works properly, but i found that removing it makes no
difference.
Note also that if i don't try to switch to a VT, i'm able to works
apparently without problems, like now while i'm writing this bug.
Cesare.
-- Package-specific info:
** Version:
Linux version 4.0.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2
(Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64
root=UUID=7ceeef59-c58b-4cfd-b0fd-0482493e48e7 ro quiet systemd.show_status=1
resume=UUID=64fe3b9b-edc0-4672-8c97-be86387d54eb acpi_osi=
** Not tainted
** Kernel log:
[ 9.054357] Bluetooth: Core ver 2.20
[ 9.054367] NET: Registered protocol family 31
[ 9.054368] Bluetooth: HCI device and connection manager initialized
[ 9.054370] Bluetooth: HCI socket layer initialized
[ 9.054372] Bluetooth: L2CAP socket layer initialized
[ 9.054378] Bluetooth: SCO socket layer initialized
[ 9.082513] usbcore: registered new interface driver btusb
[ 9.121965] usbcore: registered new interface driver ath3k
[ 9.150369] cfg80211: Calling CRDA to update world regulatory domain
[ 9.158759] asus_wmi: ASUS WMI generic driver loaded
[ 9.159168] asus_wmi: Initialization: 0x1
[ 9.159203] asus_wmi: BIOS WMI version: 7.9
[ 9.159241] asus_wmi: SFUN value: 0x4a0877
[ 9.160159] input: Asus WMI hotkeys as
/devices/platform/asus-nb-wmi/input/input16
[ 9.166316] asus_wmi: Backlight controlled by ACPI video driver
[ 9.417111] psmouse serio4: elantech: assuming hardware version 4 (with
firmware version 0x490f06)
[ 9.428857] psmouse serio4: elantech: Synaptics capabilities query result
0x50, 0x15, 0x0a.
[ 9.487041] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio4/input/input15
[ 9.705782] ath: phy0: Set parameters for CUS198
[ 9.705785] ath: phy0: Set BT/WLAN RX diversity capability
[ 9.711468] ath: phy0: Enable LNA combining
[ 9.712562] ath: EEPROM regdomain: 0x60
[ 9.712563] ath: EEPROM indicates we should expect a direct regpair map
[ 9.712564] ath: Country alpha2 being used: 00
[ 9.712565] ath: Regpair used: 0x60
[ 9.885792] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.886024] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90005080000,
irq=19
[ 10.176217] [drm] Memory usable by graphics device = 2048M
[ 10.176221] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 10.176222] fb: switching to inteldrmfb from simple
[ 10.176248] Console: switching to colour dummy device 80x25
[ 10.176308] [drm] Replacing VGA console driver
[ 10.199646] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.199649] [drm] Driver supports precise vblank timestamp query.
[ 10.199741] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.252567] fbcon: inteldrmfb (fb0) is primary device
[ 10.253880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.255185] media: Linux media interface: v0.10
[ 10.269137] Linux video capture interface: v2.00
[ 10.403276] AVX2 version of gcm_enc/dec engaged.
[ 10.403276] AES CTR mode by8 optimization enabled
[ 10.405077] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 10.465136] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 10.586087] alg: No test for crc32 (crc32-pclmul)
[ 10.725375] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
[ 10.731328] input: USB2.0 UVC HD Webcam as
/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input17
[ 10.731401] usbcore: registered new interface driver uvcvideo
[ 10.731402] USB Video Class driver (1.1.1)
[ 11.273308] cfg80211: Calling CRDA to update world regulatory domain
[ 11.316800] Console: switching to colour frame buffer device 170x48
[ 11.319258] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.319259] i915 0000:00:02.0: registered panic notifier
[ 11.319453] acpi device:74: registered as cooling_device4
[ 11.319602] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
[ 11.319712] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 11.319716] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 11.416438] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 11.416486] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 11.416540] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 12.759686] cfg80211: World regulatory domain updated:
[ 12.759690] cfg80211: DFS Master region: unset
[ 12.759692] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.759695] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.759696] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.759698] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.759700] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 12.759702] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 12.759704] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 12.759705] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.759707] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 12.759784] cfg80211: Calling CRDA for country: IT
[ 12.874733] cfg80211: Regulatory domain changed to country: IT
[ 12.874736] cfg80211: DFS Master region: ETSI
[ 12.874737] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.874739] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.874740] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 12.874742] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 12.874743] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 12.874744] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 12.881953] intel_rapl: Found RAPL domain package
[ 12.881956] intel_rapl: Found RAPL domain core
[ 12.881958] intel_rapl: Found RAPL domain uncore
[ 12.881960] intel_rapl: Found RAPL domain dram
[ 13.631135] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 14.110095] Adding 4194300k swap on /dev/sda6. Priority:-1 extents:1
across:4194300k FS
[ 14.541162] systemd-journald[191]: Received request to flush runtime journal
from PID 1
[ 17.556272] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.600569] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 23.048534] NET: Registered protocol family 15
[ 23.904819] Initializing XFRM netlink socket
[ 24.530443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.530447] Bluetooth: BNEP filters: protocol multicast
[ 24.530451] Bluetooth: BNEP socket layer initialized
[ 27.850874] wlan0: authenticate with 14:d6:4d:89:cc:12
[ 27.864884] wlan0: send auth to 14:d6:4d:89:cc:12 (try 1/3)
[ 27.867140] wlan0: authenticated
[ 27.869848] wlan0: associate with 14:d6:4d:89:cc:12 (try 1/3)
[ 27.875035] wlan0: RX AssocResp from 14:d6:4d:89:cc:12 (capab=0x431 status=0
aid=2)
[ 27.875106] wlan0: associated
[ 166.387559] asus_wmi: Unknown key cf pressed
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: PU301LA
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: PU301LA.206
board_vendor: ASUSTeK COMPUTER INC.
board_name: PU301LA
board_version: 1.0
** Loaded modules:
ctr
ccm
bnep
binfmt_misc
xfrm_user
xfrm4_tunnel
tunnel4
ipcomp
xfrm_ipcomp
esp4
ah4
af_key
xfrm_algo
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
nls_utf8
nls_cp437
vfat
fat
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
coretemp
kvm_intel
kvm
snd_hda_codec_hdmi
uvcvideo
crct10dif_pclmul
crc32_pclmul
videobuf2_vmalloc
videobuf2_memops
ghash_clmulni_intel
videobuf2_core
aesni_intel
aes_x86_64
v4l2_common
videodev
media
i915
lrw
arc4
gf128mul
snd_soc_rt5640
ath9k
glue_helper
ath9k_common
joydev
ath9k_hw
ablk_helper
cryptd
snd_soc_rl6231
snd_soc_core
ath
mac80211
asus_nb_wmi
asus_wmi
cfg80211
ath3k
btusb
sparse_keymap
bluetooth
iTCO_wdt
iTCO_vendor_support
rfkill
evdev
psmouse
serio_raw
efi_pstore
pcspkr
drm_kms_helper
drm
snd_compress
snd_hda_codec_conexant
efivars
wmi
snd_soc_sst_acpi
snd_hda_codec_generic
dell_smo8800
regmap_i2c
dw_dmac
battery
dw_dmac_core
tpm_tis
ac
tpm
int3400_thermal
video
i2c_algo_bit
i2c_designware_platform
i2c_designware_core
int3402_thermal
snd_hda_intel
acpi_thermal_rel
snd_hda_controller
shpchp
processor
processor_thermal_device
int340x_thermal_zone
snd_hda_codec
button
mei_me
mei
snd_hwdep
snd_pcm
snd_timer
lpc_ich
mfd_core
snd
i2c_i801
soundcore
fuse
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
ahci
libahci
crc32c_intel
ehci_pci
ehci_hcd
libata
xhci_pci
xhci_hcd
alx
mdio
scsi_mod
usbcore
thermal
usb_common
thermal_sys
i2c_hid
hid
sdhci_acpi
sdhci
i2c_core
mmc_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 09)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7e1c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:04.0 Signal processing controller [1180]: Intel Corporation Device
[8086:0a03] (rev 09)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:201f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0
[8086:9c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7e26000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller
[8086:9c20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e18000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1
[8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3
[8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4
[8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1
[8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:201f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e23000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller
[8086:9c43] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1
[AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e22000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22]
(rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e21000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal
[8086:9c24] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:152d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 3
Region 0: Memory at f7e20000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Qualcomm Atheros QCA8171 Gigabit Ethernet
[1969:10a1] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:200f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network
Adapter [168c:0032] (rev 01)
Subsystem: AzureWave Device [1a3b:2126]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7c80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 003 Device 005: ID 138a:0010 Validity Sensors, Inc.
Bus 003 Device 004: ID 13d3:5188 IMC Networks
Bus 003 Device 003: ID 13d3:3402 IMC Networks
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.0.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 20-1
ii linux-base 3.5
Versions of packages linux-image-4.0.0-1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.0.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi 2.02~beta2-23
ii linux-doc-4.0 4.0.2-1
Versions of packages linux-image-4.0.0-1-amd64 is related to:
ii firmware-atheros 0.44
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.44
ii firmware-linux-nonfree 0.44
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.0.0-1-amd64/postinst/depmod-error-initrd-4.0.0-1-amd64: false
linux-image-4.0.0-1-amd64/postinst/mips-initrd-4.0.0-1-amd64:
linux-image-4.0.0-1-amd64/prerm/removing-running-kernel-4.0.0-1-amd64: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/20150521071104.1734.66428.reportbug@etna
