Package: src:linux Version: 3.16.7-ckt4-3 Severity: important Dear Maintainer,
here is a kernel oops (from an eeepc 701). None of the OCR packages from the Debian repository allowed me converting the picture to text (ocropus, gocr, tesseract-ocr, cuneiform) [ocrad not tested] Here here the kernel trace: http://i.imgur.com/nLjf62S.jpg Please let me know of anything I could do in order to get it fixed. -- Package-specific info: ** Version: Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=93e31f4c-bbbb-4d55-aa08-b112cb2b93e2 ro forcefsck ** Not tainted ** Kernel log: [ 43.552663] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-de...@redhat.com [ 132.029632] NET: Registered protocol family 38 [ 160.732210] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 160.923232] usb 3-2: New USB device found, idVendor=054c, idProduct=0830 [ 160.923247] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 160.923256] usb 3-2: Product: USB Bus-powered Device [ 160.923265] usb 3-2: Manufacturer: Sony [ 160.923273] usb 3-2: SerialNumber: C685E02C30D1 [ 161.002760] hidraw: raw HID events driver (C) Jiri Kosina [ 161.023934] usbcore: registered new interface driver usbhid [ 161.023947] usbhid: USB HID core driver [ 161.032741] input: Sony USB Bus-powered Device as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:054C:0830.0001/input/input13 [ 161.033399] hid-generic 0003:054C:0830.0001: input,hidraw0: USB HID v1.11 Device [Sony USB Bus-powered Device] on usb-0000:00:1d.1-2/input0 [ 169.261506] loop: module loaded [ 169.995877] lp: driver loaded but no devices found [ 170.029862] ppdev: user-space parallel port driver [ 170.104814] fuse init (API version 7.23) [ 177.650943] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 178.554493] device eth0 entered promiscuous mode [ 180.563133] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 [ 181.991001] wlan0: authenticate with f8:7f:23:xx:xx:xx [ 182.003299] wlan0: send auth to f8:7f:23:xx:xx:xx (try 1/3) [ 182.008696] wlan0: authenticated [ 182.014266] ath5k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 182.020115] wlan0: associate with f8:7f:23:xx:xx:xx (try 1/3) [ 182.035000] wlan0: RX AssocResp from f8:7f:23:xx:xx:xx (capab=0x411 status=0 aid=2) [ 182.039506] wlan0: associated [ 182.043783] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 183.594284] device eth0 left promiscuous mode [ 183.754275] netpoll: netconsole: local port 6665 [ 183.758736] netpoll: netconsole: local IPv4 address 0.0.0.0 [ 183.763002] netpoll: netconsole: interface 'eth0' [ 183.767077] netpoll: netconsole: remote port 6666 [ 183.771194] netpoll: netconsole: remote IPv4 address 192.168.8.4 [ 183.775310] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 183.789522] netpoll: netconsole: no IP address for eth0, aborting [ 183.793644] netconsole: cleaning up [ 186.037153] [drm:i915_gem_open] [ 186.190021] [drm:i915_gem_open] [ 186.208340] [drm:i915_gem_open] [ 186.208580] [drm:i915_gem_open] [ 534.035148] [drm:i915_gem_open] [ 540.767684] [drm:i915_gem_open] [ 909.834658] perf interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 1999.860536] [drm:i915_gem_open] ** Model information eeepc 701 ** Loaded modules: nls_utf8 nls_cp437 vfat fat bluetooth 6lowpan_iphc configfs uinput fuse parport_pc ppdev lp parport sha256_generic loop hid_generic usbhid hid ecb cbc algif_skcipher af_alg dm_crypt dm_mod joydev iTCO_wdt iTCO_vendor_support arc4 evdev psmouse serio_raw uvcvideo i915 videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media lpc_ich mfd_core rng_core ath5k ath mac80211 snd_hda_codec_realtek snd_hda_codec_generic cfg80211 snd_hda_intel snd_hda_controller drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm_oss snd_mixer_oss i2c_algo_bit snd_pcm i2c_core ac battery snd_timer snd soundcore processor button video eeepc_laptop sparse_keymap rfkill shpchp ext4 crc16 mbcache jbd2 usb_storage sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ata_generic ata_piix ahci libahci libata uhci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common atl2 thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 0000000080400000-00000000805fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at 0400 [size=32] 01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) Subsystem: AzureWave AW-GE780 802.11bg Wireless Mini PCIe Card [1a3b:1026] Physical Slot: eeepc-wifi Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L2 Fast Ethernet [1969:2048] (rev a0) Subsystem: ASUSTeK Computer Inc. Device [1043:8233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fbfa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl2 ** USB devices: Bus 001 Device 003: ID eb1a:2761 eMPIA Technology, Inc. EeePC 701 integrated Webcam Bus 001 Device 002: ID 0951:1606 Kingston Technology Eee PC 701 SD Card Reader [ENE UB6225] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (990, 'testing'), (500, 'stable'), (90, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-3.16.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.55 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16.0-4-686-pae recommends: ii firmware-linux-free 3.3 pn irqbalance <none> ii libc6-i686 2.19-15 Versions of packages linux-image-3.16.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-20 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae: linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae: false linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150316003812.12230.90728.reportbug@localhost.local
