Package: src:linux Version: 3.16.7-2 Severity: normal Control: notfound -1 3.14.15-2 Control: found -1 3.16.3-2 Control: found -1 3.16.5-1
Hi, most times my laptop screen (LVDS1) is completely dimmed (= black) after boot at the GDM login prompt, if the external monitor (HDMI1) is or gets plugged in. Trying to increase the brightness (Fn+F3) shows the brightness OSD on HDMI1, but the bar only moves up to about max. 5% (= which is still a black screen). Thus the GDM login prompt (which is placed on LVDS1) is not visible, while HDMI1 works but has no content to display. Switching to tty1 and back fixes the brightness level (= normal LVDS1 with visible login prompt). But it still can't be regulated below about 95% then. After login in Gnome brightness can be regulated again. With linux 3.14 brightness is up and regulatable. With linux 3.17 (3.17.4-1~exp1) it is up, but not regulatable. It may have happened less often with earlier 3.16 versions. Without an external monitor brightness is up and regulatable on the internal display. It happens indepently if I enable or disable the built-in display in Gnome before rebooting. (Normally I have turned it off. In the past it was also turned off then at the login prompt. But I guess this is an unrelated Gnome issue which just made me realize this at all.) Due to bug #762809 in libgl1-mesa-dri I have enabled SNA for my Intel graphics HD4000. But returning to the default does not help here. There are error messages shown on tty before login. But I get them always, independently if the screen is dark or not, and also with linux 3.17. So I don't know if this is related. (And a web search shows there is much noise around them.): ~~~~~ kernel: [ 2.352424] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A kernel: [ 2.352425] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun ~~~~~ Should I file a bug about not being able to regulate the brightness level upstream and/or clone the bug here? Any more information? If I should bisect: against old good 3.14.15 or 3.14.17? Any tips beyond https://wiki.debian.org/DebianKernel/GitBisect? May I restrict the bisect to a certain dir/path? Thanks in advance and for all your work jre -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=6703b530-7dd3-4ce0-8986-05b1af26806d ro quiet ** Not tainted ** Kernel log: [ 2.288866] usb 3-2: Product: 4-Port USB 3.0 Hub [ 2.288868] usb 3-2: Manufacturer: VIA Labs, Inc. [ 2.292140] hub 3-2:1.0: USB hub found [ 2.343978] hub 3-2:1.0: 4 ports detected [ 2.436579] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 2.457558] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f00) [ 2.473082] psmouse serio1: elantech: Synaptics capabilities query result 0x41, 0x15, 0x0f. [ 2.533452] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07da [ 2.533457] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.550045] Bluetooth: Core ver 2.19 [ 2.550069] NET: Registered protocol family 31 [ 2.550070] Bluetooth: HCI device and connection manager initialized [ 2.550079] Bluetooth: HCI socket layer initialized [ 2.550082] Bluetooth: L2CAP socket layer initialized [ 2.550097] Bluetooth: SCO socket layer initialized [ 2.556570] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 2.558149] usbcore: registered new interface driver btusb [ 2.604542] usb 1-1.6: new high-speed USB device number 4 using ehci-pci [ 2.659933] Console: switching to colour frame buffer device 200x56 [ 2.667755] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.667757] i915 0000:00:02.0: registered panic notifier [ 2.684108] random: nonblocking pool is initialized [ 2.689485] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.689631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 2.689713] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.689994] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 2.690000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.707941] RPC: Registered named UNIX socket transport module. [ 2.707941] RPC: Registered udp transport module. [ 2.707941] RPC: Registered tcp transport module. [ 2.707942] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.710448] FS-Cache: Loaded [ 2.717183] FS-Cache: Netfs 'nfs' registered for caching [ 2.723645] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 2.733121] systemd-journald[169]: Received request to flush runtime journal from PID 1 [ 2.865959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.865963] Bluetooth: BNEP filters: protocol multicast [ 2.865970] Bluetooth: BNEP socket layer initialized [ 3.020956] usb 1-1.6: New USB device found, idVendor=2232, idProduct=1024 [ 3.020960] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.020961] usb 1-1.6: Product: Webcam SC-13HDL11624N [ 3.020963] usb 1-1.6: Manufacturer: Namuga\xffffffc3\xffffffbf [ 3.077657] Switched to clocksource tsc [ 3.168030] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2) [ 3.168034] r8169 0000:02:00.0: Direct firmware load failed with error -2 [ 3.168036] r8169 0000:02:00.0: Falling back to user helper [ 3.168469] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-12) [ 3.182889] r8169 0000:02:00.0 eth0: link down [ 3.182933] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.188928] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 3.204887] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 3.270394] media: Linux media interface: v0.10 [ 3.273518] Linux video capture interface: v2.00 [ 3.278316] uvcvideo: Found UVC 1.00 device Webcam SC-13HDL11624N (2232:1024) [ 3.317322] usb 2-2.3: new low-speed USB device number 3 using xhci_hcd [ 3.361450] input: Webcam SC-13HDL11624N as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11 [ 3.361528] usbcore: registered new interface driver uvcvideo [ 3.361530] USB Video Class driver (1.1.1) [ 3.413016] usb 2-2.3: New USB device found, idVendor=046d, idProduct=c050 [ 3.413021] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.413024] usb 2-2.3: Product: USB-PS/2 Optical Mouse [ 3.413026] usb 2-2.3: Manufacturer: Logitech [ 3.413153] usb 2-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.478035] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 3.484792] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 3.485330] usb 2-2.4: new low-speed USB device number 4 using xhci_hcd [ 3.569938] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3.631430] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c30e [ 3.631433] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.631435] usb 2-2.4: Product: HID compliant keyboard [ 3.631436] usb 2-2.4: Manufacturer: Logitech [ 3.631525] usb 2-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.631531] usb 2-2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.647114] hidraw: raw HID events driver (C) Jiri Kosina [ 3.703372] usbcore: registered new interface driver usbhid [ 3.703375] usbhid: USB HID core driver [ 3.705063] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:046D:C050.0001/input/input12 [ 3.705335] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:03:00.0-2.3/input0 [ 3.705488] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:046D:C30E.0002/input/input13 [ 3.705617] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:03:00.0-2.4/input0 [ 3.714848] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-2/2-2.4/2-2.4:1.1/0003:046D:C30E.0003/input/input14 [ 3.714957] hid-generic 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:03:00.0-2.4/input1 [ 3.845816] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 6.704889] wlan0: authenticate with 24:65:11:e2:84:58 [ 6.710004] wlan0: send auth to 24:65:11:e2:84:58 (try 1/3) [ 6.714736] wlan0: authenticated [ 6.715840] wlan0: associate with 24:65:11:e2:84:58 (try 1/3) [ 6.719737] wlan0: RX AssocResp from 24:65:11:e2:84:58 (capab=0x411 status=0 aid=2) [ 6.721897] wlan0: associated [ 6.721919] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6.721969] cfg80211: Calling CRDA for country: DE [ 6.723759] cfg80211: Regulatory domain changed to country: DE [ 6.723762] cfg80211: DFS Master region: ETSI [ 6.723763] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.723765] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.723766] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.723768] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 6.723769] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s) [ 6.723770] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 6.815068] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:65:11:e2:84:58 ** Model information sys_vendor: SAMSUNG ELECTRONICS CO., LTD. product_name: 900X3C/900X3D/900X3E/900X4C/900X4D product_version: 0.1 chassis_vendor: SAMSUNG ELECTRONICS CO., LTD. chassis_version: 0.1 bios_vendor: Phoenix Technologies Ltd. bios_version: P04ABK board_vendor: SAMSUNG ELECTRONICS CO., LTD. board_name: NP900X4C-A07DE board_version: FAB1 ** Loaded modules: ctr ccm hid_generic usbhid hid uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media binfmt_misc bnep cpufreq_stats cpufreq_userspace cpufreq_conservative cpufreq_powersave nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc joydev ecb btusb bluetooth 6lowpan_iphc arc4 iwldvm mac80211 iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm_intel snd_hda_codec_hdmi kvm samsung_laptop snd_hda_codec_realtek crc32_pclmul iwlwifi snd_hda_codec_generic ghash_clmulni_intel cryptd cfg80211 psmouse evdev i2c_i801 serio_raw pcspkr rfkill i915 snd_hda_intel snd_hda_controller snd_hda_codec wmi drm_kms_helper snd_hwdep snd_pcm drm tpm_tis snd_timer battery tpm snd i2c_algo_bit soundcore i2c_core button ac mei_me video lpc_ich shpchp mfd_core mei processor loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel ahci libahci ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore r8169 mii usb_common thermal fan thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: ivb_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at f0705000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f0600000-f06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f0500000-f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0709000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM75 Express Chipset LPC Controller [8086:1e5d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at f0708000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f0704000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] 01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24) Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c0cd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd ** USB devices: Bus 001 Device 004: ID 2232:1024 Bus 001 Device 003: ID 8087:07da Intel Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 2109:0810 Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 046d:c30e Logitech, Inc. UltraX Keyboard (Y-BL49) Bus 002 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse Bus 002 Device 002: ID 2109:3431 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (900, 'testing'), (300, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.54 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16.0-4-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-15 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.43 pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/5483c6d1.6040...@gmail.com
