Package: src:linux
Version: 3.16.3-2
Severity: grave
File: linux-image-3.16-2
Justification: causes non-serious data loss
Dear Maintainer,
since upgrade to 3.16-1, I cannot save files on davfs2 mounted resources.
The problem affects only some editors: mcedit, libreoffice writer
Does not affect vi and gedit.
Files smaller than 21 kylobytes are not affected.
Symptoms: open file, edit, save: editor reports that it cannot save file.
After quitting editor the file on filesystem has zero size (data is lost if not
"saved as" to another location)
Rolling back to 3.14-2 eliminates the problem.
3.16-1 and 3.16-2 do behave in the same way.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
root=/dev/sda1 ip=172.31.251.4::172.31.251.1:255.255.255.0:desktop:eth0:none
initrd=linux/initrd.img-3.16-2-amd64 BOOT_IMAGE=linux/vmlinuz-3.16-2-amd64
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 31.244783] systemd[1]: Listening on Journal Socket (/dev/log).
[ 31.244845] systemd[1]: Starting Syslog Socket.
[ 31.245157] systemd[1]: Listening on Syslog Socket.
[ 31.245219] systemd[1]: Starting udev Control Socket.
[ 31.245529] systemd[1]: Listening on udev Control Socket.
[ 31.245592] systemd[1]: Starting udev Kernel Socket.
[ 31.245901] systemd[1]: Listening on udev Kernel Socket.
[ 31.245964] systemd[1]: Starting Journal Socket.
[ 31.246280] systemd[1]: Listening on Journal Socket.
[ 31.246348] systemd[1]: Starting System Slice.
[ 31.246764] systemd[1]: Created slice System Slice.
[ 31.246830] systemd[1]: Starting File System Check on Root Device...
[ 31.247471] systemd[1]: Starting system-getty.slice.
[ 31.247965] systemd[1]: Created slice system-getty.slice.
[ 31.248070] systemd[1]: Mounting Huge Pages File System...
[ 31.248629] systemd[1]: Starting udev Coldplug all Devices...
[ 31.249315] systemd[1]: Mounting Debug File System...
[ 31.905826] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 31.948218] systemd[1]: Started Set Up Additional Binary Formats.
[ 32.708201] systemd[1]: Starting Load Kernel Modules...
[ 32.708914] systemd[1]: Mounting POSIX Message Queue File System...
[ 32.709555] systemd[1]: Starting Journal Service...
[ 32.710491] systemd[1]: Started Journal Service.
[ 35.302487] lp: driver loaded but no devices found
[ 35.586178] ppdev: user-space parallel port driver
[ 36.173568] fuse init (API version 7.23)
[ 36.520604] it87: Found IT8720F chip at 0x290, revision 8
[ 36.520671] it87: VID is disabled (pins used for GPIO)
[ 36.520730] it87: Routing internal VCCH to in7
[ 36.520784] it87: Beeping is supported
[ 37.400326] systemd-udevd[215]: starting version 215
[ 42.276880] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 43.143077] systemd-journald[196]: Received request to flush runtime journal
from PID 1
[ 44.465482] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 44.465559] ACPI: Power Button [PWRB]
[ 44.465689] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 44.465758] ACPI: Power Button [PWRF]
[ 44.465952] tsc: Marking TSC unstable due to TSC halts in idle
[ 44.466010] ACPI: acpi_idle registered with cpuidle
[ 44.466133] Switched to clocksource hpet
[ 44.863795] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.989660] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042f conflicts with OpRegion
0x000000000000042c-0x000000000000042d (\GP2C) (20140424/utaddress-258)
[ 45.989825] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 45.989921] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 46.023282] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 46.038468] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 46.115239] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 46.285536] [drm] Initialized drm 1.1.0 20060810
[ 46.670658] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[ 47.069855] iTCO_vendor_support: vendor-support=0
[ 47.451968] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 47.452097] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x0460)
[ 47.452290] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 47.492073] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 47.492135] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 47.492714] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 47.776057] floppy0: no floppy controllers found
[ 47.812853] sound hdaudioC0D2: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0) type:line
[ 47.812926] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 47.812982] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 47.813036] sound hdaudioC0D2: mono: mono_out=0x0
[ 47.813088] sound hdaudioC0D2: dig-out=0x1e/0x0
[ 47.813140] sound hdaudioC0D2: inputs:
[ 47.813192] sound hdaudioC0D2: Rear Mic=0x18
[ 47.813244] sound hdaudioC0D2: Front Mic=0x19
[ 47.813296] sound hdaudioC0D2: Line=0x1a
[ 47.813348] sound hdaudioC0D2: CD=0x1c
[ 47.813399] sound hdaudioC0D2: dig-in=0x1f
[ 47.826151] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[ 47.828366] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 47.828509] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 47.828648] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 47.828786] input: HDA Intel Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 47.828925] input: HDA Intel Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 47.829066] input: HDA Intel Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 47.829204] input: HDA Intel Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 47.937428] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 47.937631] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 49.665201] media: Linux media interface: v0.10
[ 49.717071] Linux video capture interface: v2.00
[ 50.793461] usb 4-5: Warning! Unlikely big volume range (=6400), cval->res
is probably wrong.
[ 50.793538] usb 4-5: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7936/1
[ 50.793790] usbcore: registered new interface driver snd-usb-audio
[ 51.012732] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080a)
[ 51.028243] input: UVC Camera (046d:080a) as
/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5:1.0/input/input16
[ 51.028375] usbcore: registered new interface driver uvcvideo
[ 51.028433] USB Video Class driver (1.1.1)
[ 53.711796] Adding 3145724k swap on /dev/sdb. Priority:-1 extents:1
across:3145724k FS
[ 59.252705] nvidia: module license 'NVIDIA' taints kernel.
[ 59.252787] Disabling lock debugging due to kernel taint
[ 59.266751] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 59.267123] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on
minor 0
[ 59.267198] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug
5 20:58:26 PDT 2014
[ 62.160147] iscsi: registered transport (iser)
[ 115.555840] nvidia 0000:01:00.0: irq 52 for MSI/MSI-X
[ 3727.084483] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 3804.831105] sda1: WRITE SAME failed. Manually zeroing.
[ 8070.335416] perf interrupt took too long (2501 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[16342.659340] usb 4-4: USB disconnect, device number 2
[16342.659345] usb 4-4.1: USB disconnect, device number 4
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: EQ45M-S2
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: FB
board_vendor: Gigabyte Technology Co., Ltd.
board_name: EQ45M-S2
board_version: x.x
** Loaded modules:
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
binfmt_misc
ib_iser
rdma_cm
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
ib_addr
nvidia(PO)
uvcvideo
snd_usb_audio
videobuf2_vmalloc
videobuf2_memops
snd_usbmidi_lib
videobuf2_core
v4l2_common
snd_rawmidi
videodev
media
kvm_intel
snd_seq_device
kvm
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
snd_hda_intel
iTCO_wdt
snd_hda_controller
snd_hda_codec
iTCO_vendor_support
evdev
drm
snd_hwdep
i2c_i801
pcspkr
lpc_ich
psmouse
serio_raw
snd_pcm
mfd_core
snd_timer
i2c_core
snd
soundcore
shpchp
acpi_cpufreq
tpm_infineon
tpm_tis
tpm
button
processor
thermal_sys
it87
hwmon_vid
coretemp
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
crc32c_generic
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
hid_generic
usbhid
hid
sg
sr_mod
cdrom
ata_generic
ata_piix
pata_jmicron
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
e1000e
usbcore
ptp
usb_common
pps_core
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 00:24:1d:c1:64:46 brd ff:ff:ff:ff:ff:ff
inet 172.31.251.4/24 brd 172.31.251.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::224:1dff:fec1:6446/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 00:1b:21:42:4d:54 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 1272290565 1126253 0 2 0 0 0 5265 738885836
807739 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 10944 154 0 0 0 0 0 0 10944
154 0 0 0 0 0 0
*** Protocol statistics:
Ip:
583432 total packets received
0 forwarded
0 incoming packets discarded
583432 incoming packets delivered
385331 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
IcmpMsg:
OutType3: 1
Tcp:
339 active connections openings
5 passive connection openings
4 failed connection attempts
10 connection resets received
13 connections established
576609 segments received
799775 segments send out
72 segments retransmited
5 bad segments received.
400 resets sent
Udp:
6227 packets received
0 packets to unknown port received.
0 packet receive errors
6952 packets sent
UdpLite:
TcpExt:
85 TCP sockets finished time wait in fast timer
4349 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 162 times
28 packets directly queued to recvmsg prequeue.
1529 bytes directly received in process context from prequeue
319466 packet headers predicted
2 packets header predicted and directly queued to user
10611 acknowledgments not containing data payload received
261388 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
1 fast retransmits
6 other TCP timeouts
TCPLossProbes: 62
TCPLossProbeRecovery: 55
1 SACK retransmits failed
162 DSACKs sent for old packets
5 DSACKs sent for out of order packets
40 DSACKs received
75 connections reset due to unexpected data
3 connections reset due to early user close
2 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 39
TCPSackShiftFallback: 1
TCPRcvCoalesce: 8347
TCPOFOQueue: 2217
TCPOFOMerge: 5
TCPChallengeACK: 5
TCPSYNChallenge: 5
TCPSpuriousRtxHostQueues: 1
TCPAutoCorking: 12001
TCPSynRetrans: 4
TCPOrigDataSent: 532081
IpExt:
InMcastPkts: 5337
OutMcastPkts: 331
InBcastPkts: 193
OutBcastPkts: 8
InOctets: 1223914080
OutOctets: 702358848
InMcastOctets: 2405974
OutMcastOctets: 14817
InBcastOctets: 18734
OutBcastOctets: 392
InNoECTPkts: 1124532
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at d200 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6024000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f6020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f3000000-f3ffffff
Prefetchable memory behind bridge: 00000000f6100000-00000000f62fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 5 [8086:3a78] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 00000000f6300000-00000000f64fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d600 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6026000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller [8086:3a14] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family)
4-port SATA IDE Controller [8086:3a00] (rev 02) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d700 [size=8]
Region 1: I/O ports at d800 [size=4]
Region 2: I/O ports at d900 [size=8]
Region 3: I/O ports at da00 [size=4]
Region 4: I/O ports at db00 [size=16]
Region 5: I/O ports at dc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6027000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family)
2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at de00 [size=8]
Region 1: I/O ports at df00 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e100 [size=4]
Region 4: I/O ports at e200 [size=16]
Region 5: I/O ports at e300 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107GL [Quadro
K600] [10de:0ffa] (rev a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device [10de:094b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at f1000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller
[10de:0e1b] (rev a1)
Subsystem: NVIDIA Corporation Device [10de:094b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller
[197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b100 [size=4]
Region 2: I/O ports at b200 [size=8]
Region 3: I/O ports at b300 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5080000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f5000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at f50a0000 (32-bit, non-prefetchable) [size=16K]
[virtual] Expansion ROM at f4000000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 046d:080a Logitech, Inc. Portable Webcam C905
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.117
ii kmod 18-2
ii linux-base 3.5
ii module-init-tools 18-2
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
ii debian-kernel-handbook 1.0.15
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf-show failed
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/20140927130202.2114.16244.reportbug@desktop
