Package: src:linux
Version: 3.16.2-3
Severity: normal
Dear Maintainer,
with the current unstable kernel (3.16), the SD card reader in my Asus X53SM
does not
work anymore. When I plugin in a card, nothing happens in dmesg or anywhere else
(as far as I can tell).
The same card reader works fine with the current testing kernel (3.14).
The issue also exists with vanilla upstream 3.16.1. I plan to report this issue
upstream
once I verified that the reader worked in earlier vanilla kernels.
Please let me know if you need any further information.
Kind regards
Ralf
-- Package-specific info:
** Version:
Linux version 3.16-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-10) ) #1 SMP Debian 3.16.2-3 (2014-09-13)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-1-amd64 root=/dev/mapper/cryptvg-rootlv ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 1327.861969] smpboot: CPU 3 is now offline
[ 1327.864114] ACPI: Low-level resume complete
[ 1327.864153] PM: Restoring platform NVS memory
[ 1327.864614] Enabling non-boot CPUs ...
[ 1327.864691] x86: Booting SMP configuration:
[ 1327.864692] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1327.875406] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[ 1327.875676] kvm: enabling virtualization on CPU1
[ 1327.877893] Intel pstate controlling: cpu 1
[ 1327.877954] CPU1 is up
[ 1327.878009] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1327.888530] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[ 1327.889279] kvm: enabling virtualization on CPU2
[ 1327.891493] Intel pstate controlling: cpu 2
[ 1327.891550] CPU2 is up
[ 1327.891615] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1327.902695] kvm: enabling virtualization on CPU3
[ 1327.904923] Intel pstate controlling: cpu 3
[ 1327.904979] CPU3 is up
[ 1327.907930] ACPI: Waking up from system sleep state S3
[ 1327.924174] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1327.924519] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1327.924721] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
[ 1327.925175] PM: noirq resume of devices complete after 15.077 msecs
[ 1327.925397] PM: early resume of devices complete after 0.188 msecs
[ 1327.925433] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[ 1327.925647] r8169 0000:05:00.0: System wakeup disabled by ACPI
[ 1327.925670] usb usb2: root hub lost power or was reset
[ 1327.925672] usb usb3: root hub lost power or was reset
[ 1327.932101] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 1327.932164] sd 0:0:0:0: [sda] Starting disk
[ 1327.932246] sd 1:0:0:0: [sdb] Starting disk
[ 1327.935431] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1327.935436] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1327.935440] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1327.935445] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1327.935449] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1328.008109] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 1328.008109] [drm] This can cause pipe underruns and display issues.
[ 1328.008110] [drm] Please upgrade your BIOS to fix this.
[ 1328.068188] r8169 0000:05:00.0 eth0: link down
[ 1328.136377] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1328.244363] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1328.245240] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1328.300576] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
[ 1328.346052] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1328.346122] ata2.00: configured for UDMA/133
[ 1328.393779] PM: resume of devices complete after 467.877 msecs
[ 1328.394229] PM: Finishing wakeup.
[ 1328.394232] Restarting tasks ... done.
[ 1328.396632] video LNXVIDEO:00: Restoring backlight state
[ 1328.398056] bbswitch: disabling discrete graphics
[ 1328.398075] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1328.464853] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 1328.470535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1328.558685] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07dc
[ 1328.558688] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1328.571811] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 1328.602507] bluetooth hci0: firmware: direct-loading firmware
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 1328.602513] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 1328.612462] r8169 0000:05:00.0 eth0: link down
[ 1328.612540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1328.613273] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 1328.613522] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 1328.626829] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1328.785188] Bluetooth: hci0: Intel Bluetooth firmware patch completed and
activated
[ 1329.333514] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1330.550818] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1330.552627] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 1330.552639] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 1330.552645] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 1330.555679] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 1330.555689] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 1330.555695] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 1330.556839] ata1.00: configured for UDMA/133
[ 1340.612004] wlan0: authenticate with 80:1f:02:77:77:46
[ 1340.614742] wlan0: send auth to 80:1f:02:77:77:46 (try 1/3)
[ 1340.616527] wlan0: authenticated
[ 1340.617355] wlan0: associate with 80:1f:02:77:77:46 (try 1/3)
[ 1340.621370] wlan0: RX AssocResp from 80:1f:02:77:77:46 (capab=0x411 status=0
aid=2)
[ 1340.624505] wlan0: associated
[ 1340.624573] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1826.212469] wlan0: deauthenticating from 80:1f:02:77:77:46 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 1826.221380] cfg80211: Calling CRDA to update world regulatory domain
[ 1826.258748] cfg80211: World regulatory domain updated:
[ 1826.258750] cfg80211: DFS Master region: unset
[ 1826.258750] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1826.258752] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1826.258753] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1826.258754] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 1826.258755] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 1826.258756] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 1826.258757] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 1845.361045] wlan0: authenticate with 80:1f:02:77:77:46
[ 1845.363867] wlan0: send auth to 80:1f:02:77:77:46 (try 1/3)
[ 1845.365680] wlan0: authenticated
[ 1845.367753] wlan0: associate with 80:1f:02:77:77:46 (try 1/3)
[ 1845.371851] wlan0: RX AssocResp from 80:1f:02:77:77:46 (capab=0x411 status=0
aid=2)
[ 1845.375071] wlan0: associated
[ 1845.375110] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K53SM
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K53SM.214
board_vendor: ASUSTeK Computer Inc.
board_name: K53SM
board_version: 1.0
** Loaded modules:
ctr
ccm
bnep
bbswitch(O)
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
joydev
arc4
ecb
uvcvideo
videobuf2_vmalloc
btusb
videobuf2_memops
videobuf2_core
bluetooth
v4l2_common
videodev
6lowpan_iphc
media
iwlmvm
mac80211
snd_hda_codec_hdmi
snd_hda_codec_realtek
iTCO_wdt
iTCO_vendor_support
asus_nb_wmi
asus_wmi
mxm_wmi
sparse_keymap
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
snd_hda_intel
snd_hda_controller
pcspkr
iwlwifi
snd_hda_codec
snd_hwdep
psmouse
snd_pcm
serio_raw
i2c_i801
snd_timer
cfg80211
snd
soundcore
lpc_ich
mei_me
rfkill
mfd_core
mei
wmi
battery
shpchp
ac
evdev
processor
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
cuse
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
libata
scsi_mod
r8169
xhci_hcd
mii
i915
i2c_algo_bit
ehci_pci
drm_kms_helper
ehci_hcd
drm
usbcore
usb_common
i2c_core
thermal
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: db000000-dc0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if
00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:212e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at df00a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1ac3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de600000-deffffff
Prefetchable memory behind bridge: 00000000d4200000-00000000d4bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ddc00000-de5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd200000-ddbfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dc800000-dd1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 48
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT
630M] [10de:0de9] (rev ff) (prog-if ff)
!!! Unknown header type 7f
03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1]
(rev 73)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB
Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card
Reader Controller
Bus 001 Device 004: ID 13d3:5710 IMC Networks UVC VGA Webcam
Bus 001 Device 006: ID 8087:07dc Intel Corp.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (100, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-1-amd64/postinst/mips-initrd-3.16-1-amd64:
linux-image-3.16-1-amd64/postinst/depmod-error-initrd-3.16-1-amd64: false
linux-image-3.16-1-amd64/prerm/removing-running-kernel-3.16-1-amd64: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/20140913194901.3142.5013.reportbug@r-schnelltop
