Package: linux-2.6 Version: 2.6.32-48squeeze5 Severity: important It seems like we are getting random shutdowns, typically sometime between 7-9am CST. The last message in the logs is that a signal 15 was sent to all processes. Due to the nature of our business, we don't keep the server down long enough to leave time for investigation via DRAC. There are no services or crons that I know of that would randomly send a signal 15 to all processes. When this occurs, the console states that rsyslogd has stopped. We are in the process of making a Debian 7 server to transfer to, in case it's an OS related issue. Apr 30 08:30:28 ace kernel: Kernel logging (proc) stopped. Apr 30 08:30:28 ace rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1272" x-info="http://www.rsyslog.com"] exiting on signal 15.
-- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze4) (da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Sep 23 22:14:43 UTC 2013 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=db2d279a-afb3-4ea5-906a-bbb4ab04a8ce ro quiet pcie_aspm=off acpi=off noapic noacpi ** Not tainted ** Kernel log: [ 11.066064] alloc kstat_irqs on node -1 [ 11.066067] bnx2 0000:01:00.0: irq 55 for MSI/MSI-X [ 11.066068] alloc irq_desc for 56 on node -1 [ 11.066069] alloc kstat_irqs on node -1 [ 11.066072] bnx2 0000:01:00.0: irq 56 for MSI/MSI-X [ 11.066073] alloc irq_desc for 57 on node -1 [ 11.066074] alloc kstat_irqs on node -1 [ 11.066077] bnx2 0000:01:00.0: irq 57 for MSI/MSI-X [ 11.066078] alloc irq_desc for 58 on node -1 [ 11.066079] alloc kstat_irqs on node -1 [ 11.066081] bnx2 0000:01:00.0: irq 58 for MSI/MSI-X [ 11.066083] alloc irq_desc for 59 on node -1 [ 11.066084] alloc kstat_irqs on node -1 [ 11.066086] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X [ 11.066087] alloc irq_desc for 60 on node -1 [ 11.066088] alloc kstat_irqs on node -1 [ 11.066091] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X [ 11.066092] alloc irq_desc for 61 on node -1 [ 11.066093] alloc kstat_irqs on node -1 [ 11.066095] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X [ 11.116152] bnx2: eth0: using MSIX [ 11.116855] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.144159] fuse init (API version 7.13) [ 13.056484] RPC: Registered udp transport module. [ 13.056486] RPC: Registered tcp transport module. [ 13.056487] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.634934] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 13.788796] svc: failed to register lockdv1 RPC service (errno 97). [ 13.789514] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 13.807919] NFSD: starting 90-second grace period [ 14.346182] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 14.346925] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.699607] dgrp: Digi RealPort driver version: 1.9-29 [ 19.699609] dgrp: For the tools package or updated drivers please visit http://www.digi.com [ 20.942627] ipmi message handler version 39.2 [ 20.948438] IPMI System Interface driver. [ 20.948442] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 21.094539] ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 21.094544] IPMI kcs interface initialized [ 21.100422] ipmi device interface [ 27.916772] Fusion MPT base driver 3.04.12 [ 27.916774] Copyright (c) 1999-2008 LSI Corporation [ 27.918303] Fusion MPT misc device (ioctl) driver 3.04.12 [ 27.918332] mptctl: Registered with Fusion MPT base driver [ 27.918333] mptctl: /dev/mptctl @ (major,minor=10,220) [ 27.960581] mpt2sas version 02.100.03.00 loaded [ 41.090374] megasas: fasync_helper was not called first [ 47.543675] tun: Universal TUN/TAP device driver, 1.6 [ 47.543677] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 48.246056] ip_tables: (C) 2000-2006 Netfilter Core Team [ 48.262518] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 48.262648] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 48.262650] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 48.262651] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 102.871253] PPP generic driver version 2.4.2 [ 150.402387] PPP BSD Compression module registered [ 150.417832] PPP Deflate Compression module registered [ 164.065542] IPMI System Interface driver. [ 164.065546] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 165.185975] ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 165.186030] IPMI kcs interface initialized [ 1300.729162] process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead. [ 2444.218275] grub-probe: sending ioctl 1261 to a partition! [ 2444.218277] grub-probe: sending ioctl 1261 to a partition! [ 2444.425487] grub-probe: sending ioctl 1261 to a partition! [ 2444.425490] grub-probe: sending ioctl 1261 to a partition! [ 2444.534833] grub-probe: sending ioctl 1261 to a partition! [ 2444.534836] grub-probe: sending ioctl 1261 to a partition! [ 2444.666232] grub-probe: sending ioctl 1261 to a partition! [ 2444.666234] grub-probe: sending ioctl 1261 to a partition! [ 2445.188293] grub-probe: sending ioctl 1261 to a partition! [ 2445.188295] grub-probe: sending ioctl 1261 to a partition! [ 2449.251390] __ratelimit: 184 callbacks suppressed [ 2449.251392] grub-probe: sending ioctl 1261 to a partition! [ 2449.251395] grub-probe: sending ioctl 1261 to a partition! [ 2449.273189] grub-probe: sending ioctl 1261 to a partition! [ 2449.273191] grub-probe: sending ioctl 1261 to a partition! [ 2449.306233] grub-probe: sending ioctl 1261 to a partition! [ 2449.306235] grub-probe: sending ioctl 1261 to a partition! [ 2449.306563] grub-probe: sending ioctl 1261 to a partition! [ 2449.306566] grub-probe: sending ioctl 1261 to a partition! [ 2449.307160] grub-probe: sending ioctl 1261 to a partition! [ 2449.307163] grub-probe: sending ioctl 1261 to a partition! [ 2454.266655] __ratelimit: 282 callbacks suppressed [ 2454.266657] grub-probe: sending ioctl 1261 to a partition! [ 2454.266659] grub-probe: sending ioctl 1261 to a partition! [ 2454.299753] grub-probe: sending ioctl 1261 to a partition! [ 2454.299758] grub-probe: sending ioctl 1261 to a partition! [ 2454.300083] grub-probe: sending ioctl 1261 to a partition! [ 2454.300086] grub-probe: sending ioctl 1261 to a partition! [ 2454.300671] grub-probe: sending ioctl 1261 to a partition! [ 2454.300674] grub-probe: sending ioctl 1261 to a partition! [ 2454.332093] grub-probe: sending ioctl 1261 to a partition! [ 2454.332099] grub-probe: sending ioctl 1261 to a partition! [ 2456.871513] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2456.872020] SGI XFS Quota Management subsystem [ 2456.874581] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2456.883162] NTFS driver 2.1.29 [Flags: R/W MODULE]. [ 2456.889169] QNX4 filesystem 0.2.3 registered. [ 2456.897132] Btrfs loaded ** Model information sys_vendor: Dell Inc. product_name: PowerEdge R510 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 1.9.0 board_vendor: Dell Inc. board_name: 0DPRKF board_version: A06 ** Loaded modules: Module Size Used by btrfs 374941 0 crc32c 2560 1 libcrc32c 1042 1 btrfs ufs 56314 0 qnx4 6194 0 hfsplus 65254 0 hfs 37471 0 minix 21181 0 ntfs 162316 0 vfat 7868 0 msdos 6202 0 fat 39958 2 vfat,msdos jfs 139801 0 xfs 434713 0 reiserfs 193644 0 ext4 288211 0 jbd2 66951 1 ext4 crc16 1319 1 ext4 ext2 52809 0 ipmi_si 30960 1 ppp_deflate 3410 0 zlib_deflate 17746 2 btrfs,ppp_deflate bsd_comp 4452 1 ppp_async 6245 1 crc_ccitt 1323 1 ppp_async ppp_generic 19195 7 ppp_deflate,bsd_comp,ppp_async slhc 4003 1 ppp_generic ipt_MASQUERADE 1554 1 xt_tcpudp 2319 1 iptable_nat 4283 1 nf_nat 13308 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 9833 3 iptable_nat,nf_nat nf_conntrack 46391 4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip_tables 13915 1 iptable_nat x_tables 12845 4 ipt_MASQUERADE,xt_tcpudp,iptable_nat,ip_tables tun 10828 6 mpt2sas 87677 1 scsi_transport_sas 19817 1 mpt2sas mptctl 20950 1 mptbase 48334 1 mptctl ipmi_devintf 6587 2 ipmi_msghandler 26634 2 ipmi_si,ipmi_devintf dell_rbu 4679 0 dgrp 80011 4 nfsd 254206 11 lockd 57539 1 nfsd nfs_acl 2031 1 nfsd auth_rpcgss 33460 1 nfsd sunrpc 161356 10 nfsd,lockd,nfs_acl,auth_rpcgss exportfs 3154 2 xfs,nfsd fuse 50844 9 loop 11767 0 joydev 8459 0 snd_pcm 60487 0 snd_timer 15598 1 snd_pcm snd 46510 2 snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6201 1 snd_pcm psmouse 49937 0 serio_raw 3752 0 evdev 7352 1 dcdbas 5016 0 pcspkr 1699 0 ext3 106502 4 jbd 37157 1 ext3 mbcache 5050 3 ext4,ext2,ext3 sd_mod 29889 6 ses 5144 0 usbhid 33196 0 hid 63241 1 usbhid crc_t10dif 1276 1 sd_mod enclosure 5487 1 ses uhci_hcd 18473 0 ata_generic 3239 0 megaraid_sas 58575 7 ata_piix 21108 0 libata 133616 2 ata_generic,ata_piix ehci_hcd 31937 0 scsi_mod 126677 7 mpt2sas,scsi_transport_sas,mptctl,sd_mod,ses,megaraid_sas,libata usbcore 123175 4 usbhid,uhci_hcd,ehci_hcd nls_base 6567 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore bnx2 57337 0 ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto iface eth0 iface eth0 inet static address 10.0.2.15 netmask 255.255.252.0 gateway 10.0.0.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether d4:ae:52:78:e0:be brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/22 brd 10.0.3.255 scope global eth0 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether d4:ae:52:78:e0:bf brd ff:ff:ff:ff:ff:ff 4: tun1: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1440 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 192.168.1.2 peer 192.168.1.1/32 scope global tun1 5: tun2: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 192.168.2.2 peer 192.168.2.1/32 scope global tun2 6: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 192.168.0.2 peer 192.168.0.1/32 scope global tun0 9: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 3 link/ppp inet 10.0.2.15 peer 20.4.2.0/32 scope global ppp0 *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 412884 6651 0 0 0 0 0 0 412884 6651 0 0 0 0 0 0 eth0:118149834 384165 0 0 0 0 0 0 112487647 391941 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 tun1: 851855 7554 0 0 0 0 0 0 4678871 11162 0 0 0 0 0 0 tun2: 3409094 26280 0 0 0 0 0 0 7082423 31373 0 0 0 0 0 0 tun0: 1797300 19106 0 0 0 0 0 0 2291944 18916 0 0 0 0 0 0 ppp0: 52522 262 1 0 0 0 0 0 21058 285 0 0 0 0 0 0 *** Protocol statistics: Ip: 439166 total packets received 31095 forwarded 0 incoming packets discarded 408011 incoming packets delivered 445118 requests sent out Icmp: 1095 ICMP messages received 12 input ICMP message failed. ICMP input histogram: destination unreachable: 204 echo requests: 145 echo replies: 746 994 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 70 echo request: 779 echo replies: 145 IcmpMsg: InType0: 746 InType3: 204 InType8: 145 OutType0: 145 OutType3: 70 OutType8: 779 Tcp: 11946 active connections openings 598 passive connection openings 628 failed connection attempts 24 connection resets received 68 connections established 404420 segments received 409492 segments send out 1736 segments retransmited 28 bad segments received. 19157 resets sent Udp: 2914 packets received 15 packets to unknown port received. 0 packet receive errors 1798 packets sent UdpLite: TcpExt: 14 packets pruned from receive queue because of socket buffer overrun 1 ICMP packets dropped because they were out-of-window 11191 TCP sockets finished time wait in fast timer 29 time wait sockets recycled by time stamp 10482 delayed acks sent 4 delayed acks further delayed because of locked socket Quick ack mode was activated 166 times 115080 packets directly queued to recvmsg prequeue. 1107203 bytes directly in process context from backlog 26541382 bytes directly received in process context from prequeue 128321 packet headers predicted 100799 packets header predicted and directly queued to user 27797 acknowledgments not containing data payload received 178619 predicted acknowledgments 1 times recovered from packet loss due to fast retransmit 7 times recovered from packet loss by selective acknowledgements Detected reordering 1 times using FACK Detected reordering 3 times using time stamp 3 congestion windows fully recovered without slow start 13 congestion windows partially recovered using Hoe heuristic 14 congestion windows recovered without slow start by DSACK 41 congestion windows recovered without slow start after partial ack 15 TCP data loss events 1 timeouts after reno fast retransmit 2 timeouts after SACK recovery 14 fast retransmits 14 forward retransmits 330 retransmits in slow start 744 other TCP timeouts 1 classic Reno fast retransmits failed 2 SACK retransmits failed 630 packets collapsed in receive queue due to low socket buffer 165 DSACKs sent for old packets 100 DSACKs received 7 connections reset due to unexpected data 3 connections reset due to early user close 619 connections aborted due to timeout TCPDSACKIgnoredOld: 36 TCPDSACKIgnoredNoUndo: 38 TCPSpuriousRTOs: 3 TCPSackShifted: 17 TCPSackMerged: 12 TCPSackShiftFallback: 67 IpExt: InBcastPkts: 709 OutBcastPkts: 61 InOctets: 117530126 OutOctets: 119138541 InBcastOctets: 101552 OutBcastOctets: 8012 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port [8086:3403] (rev 13) Subsystem: Dell Device [1028:02f1] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 15 Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit- Address: 00000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ DevCtl2: Completion Timeout: 17s to 64s, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: da000000-ddffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device [1028:02f1] Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- Address: fee0f00c Data: 4149 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ DevCtl2: Completion Timeout: 1s to 3.5s, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: df100000-df1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device [1028:02f1] Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- Address: fee0f00c Data: 4151 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #4, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ DevCtl2: Completion Timeout: 1s to 3.5s, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device [1028:02f1] Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- Address: fee0f00c Data: 4159 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #7, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ DevCtl2: Completion Timeout: 1s to 3.5s, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device [1028:02f1] Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- Address: fee0f00c Data: 4161 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #9, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ DevCtl2: Completion Timeout: 1s to 3.5s, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device [1028:02f1] Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- Address: fee0f00c Data: 4169 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #10, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ DevCtl2: Completion Timeout: 1s to 3.5s, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 14 Region 4: I/O ports at ec40 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at ec60 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 6 Region 4: I/O ports at ec80 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at eca0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 6 Region 4: I/O ports at ecc0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at ece0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:02f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 6 Region 0: Memory at df0ff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: de000000-deffffff Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device [1028:02f1] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 14 Region 0: I/O ports at e8e0 [size=8] Region 1: I/O ports at e8d0 [size=4] Region 2: I/O ports at e8e8 [size=8] Region 3: I/O ports at e8d4 [size=4] Region 4: I/O ports at ec00 [size=16] Region 5: I/O ports at ec10 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ata_piix 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 0: I/O ports at e8f0 [size=8] Region 1: I/O ports at e8d8 [size=4] Region 2: I/O ports at e8f8 [size=8] Region 3: I/O ports at e8dc [size=4] Region 4: I/O ports at ec20 [size=16] Region 5: I/O ports at ec30 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ata_piix 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20) Subsystem: Dell Device [1028:02f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 15 Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme II Ethernet Controller Read-only fields: [PN] Part number: BCM95716C1 [EC] Engineering changes: 220197-3 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 30 32 38 [V0] Vendor specific: 6.2.12 [RV] Reserved: checksum good, 22 byte(s) reserved End Capabilities: [58] MSI: Enable- Count=1/16 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [a0] MSI-X: Enable+ Count=9 Masked- Vector table: BAR=0 offset=0000c000 PBA: BAR=0 offset=0000e000 Capabilities: [ac] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Kernel driver in use: bnx2 01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20) Subsystem: Dell Device [1028:02f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 14 Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme II Ethernet Controller Read-only fields: [PN] Part number: BCM95716C1 [EC] Engineering changes: 220197-3 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 30 32 38 [V0] Vendor specific: 6.2.12 [RV] Reserved: checksum good, 22 byte(s) reserved End Capabilities: [58] MSI: Enable- Count=1/16 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [a0] MSI-X: Enable- Count=9 Masked- Vector table: BAR=0 offset=0000c000 PBA: BAR=0 offset=0000e000 Capabilities: [ac] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Kernel driver in use: bnx2 02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 1078 [1000:0060] (rev 04) Subsystem: Dell PERC 6/i Integrated RAID Controller [1028:1f0c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 15 Region 0: Memory at df180000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at fc00 [size=256] Region 3: Memory at df1c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at df100000 [disabled] [size=32K] Capabilities: [b0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 2048 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 <2us, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [c4] MSI: Enable- Count=1/4 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [d4] MSI-X: Enable- Count=4 Masked- Vector table: BAR=0 offset=0003e000 PBA: BAR=0 offset=00fff000 Capabilities: [e0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [ec] Vital Product Data Not readable Kernel driver in use: megaraid_sas 06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:02f1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M] Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at de000000 [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- ** USB devices: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0624:0248 Avocent Corp. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.9 APT prefers oldstable-updates APT policy: (500, 'oldstable-updates'), (500, 'oldstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-48squeeze5 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-48squeeze5 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: ii firmware-bnx2 0.28+squeeze1 Binary firmware for Broadcom NetXt pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.28+squeeze1 Binary firmware for various driver ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140430142534.85245.47397.report...@ace.additech.com