Package: src:linux Followup-For: Bug #735254 I can confirm this issue on a TS-219. Adding "DTB-Append-From: 3.12" and "DTB-Id: kirkwood-ts219-6281.dtb" in the apropriate place in all.db solves the issue parially and maybe only for a TS-219 (with Soc: 88F6281)
reflashing with kernel 3.12 fails because machine name has changed in device-tree. GRTNX, RobJE -- Package-specific info: ** Version: Linux version 3.12-0.bpo.1-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.12.6-2~bpo70+1 (2014-01-07) ** Command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768 ** Not tainted ** Kernel log: [ 3.900913] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.909162] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.918222] sd 1:0:0:0: [sdb] Write Protect is off [ 3.923062] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.923080] sd 0:0:0:0: [sda] Write Protect is off [ 3.927907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.928101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.937219] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.979606] sdb: sdb1 sdb2 [ 3.983167] sda: sda1 sda2 [ 3.988464] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.993485] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.376216] md: md0 stopped. [ 4.389290] md: bind<sdb1> [ 4.400689] md: bind<sda1> [ 4.424002] md: raid1 personality registered for level 1 [ 4.430355] md/raid1:md0: active with 2 out of 2 mirrors [ 4.435839] md0: detected capacity change from 0 to 999692173312 [ 4.442193] RAID1 conf printout: [ 4.442204] --- wd:2 rd:2 [ 4.442213] disk 0, wo:0, o:1, dev:sda1 [ 4.442221] disk 1, wo:0, o:1, dev:sdb1 [ 4.455950] md0: unknown partition table [ 4.479595] device-mapper: uevent: version 1.0.3 [ 4.487015] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-de...@redhat.com [ 4.591082] bio: create slab <bio-1> at 1 [ 4.769140] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.790586] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6.614941] udevd[308]: starting version 175 [ 6.788375] input: gpio_keys.3 as /devices/gpio_keys.3/input/input0 [ 7.048864] orion_wdt: Initial timeout 21 sec [ 7.145097] usbcore: registered new interface driver usbfs [ 7.201410] usbcore: registered new interface driver hub [ 7.238630] usbcore: registered new device driver usb [ 7.296547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.368172] ehci-orion: EHCI orion driver [ 7.488089] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.525959] libphy: orion_mdio_bus: probed [ 7.531214] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral [ 8.113648] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.640122] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 8.675746] orion-ehci f1050000.ehci: irq 24, io mem 0xf1050000 [ 8.714355] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.724536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.731476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.738764] usb usb1: Product: EHCI Host Controller [ 8.743676] usb usb1: Manufacturer: Linux 3.12-0.bpo.1-kirkwood ehci_hcd [ 8.750423] usb usb1: SerialNumber: f1050000.ehci [ 8.765609] hub 1-0:1.0: USB hub found [ 8.781263] hub 1-0:1.0: 1 port detected [ 8.881220] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:8c:76:74 [ 9.113277] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 9.262757] usb 1-1: New USB device found, idVendor=058f, idProduct=6254 [ 9.269532] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.294392] hub 1-1:1.0: USB hub found [ 9.306943] hub 1-1:1.0: 4 ports detected [ 10.155923] Adding 498008k swap on /dev/sda2. Priority:-1 extents:1 across:498008k [ 10.201882] Adding 498008k swap on /dev/sdb2. Priority:-2 extents:1 across:498008k [ 10.237460] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 10.575063] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 10.925312] loop: module loaded [ 18.978766] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem [ 19.033688] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 19.059890] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem [ 19.117530] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 19.145071] EXT4-fs (dm-7): mounting ext3 file system using the ext4 subsystem [ 19.175291] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 19.199526] EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem [ 19.276633] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 19.292174] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem [ 19.333510] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 19.350331] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem [ 19.373949] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 19.407672] EXT4-fs (dm-8): mounting ext3 file system using the ext4 subsystem [ 19.453725] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 19.501954] EXT4-fs (dm-9): mounting ext3 file system using the ext4 subsystem [ 19.541657] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 19.564383] EXT4-fs (dm-5): mounting ext3 file system using the ext4 subsystem [ 19.613604] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 19.647377] EXT4-fs (dm-11): mounting ext3 file system using the ext4 subsystem [ 19.698798] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null) [ 19.791622] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null) [ 19.864089] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null) [ 24.383804] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.462237] 8021q: 802.1Q VLAN Support v1.8 [ 25.543540] IPv6: ADDRCONF(NETDEV_UP): vlan2: link is not ready [ 27.154866] RPC: Registered named UNIX socket transport module. [ 27.160853] RPC: Registered udp transport module. [ 27.165588] RPC: Registered tcp transport module. [ 27.170320] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 27.264835] FS-Cache: Loaded [ 27.333761] FS-Cache: Netfs 'nfs' registered for caching [ 27.429392] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 27.471706] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 27.481701] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.488285] IPv6: ADDRCONF(NETDEV_CHANGE): vlan2: link becomes ready [ 31.388259] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 31.421681] NFSD: starting 90-second grace period (net c054d8e0) [ 49.063747] ip_tables: (C) 2000-2006 Netfilter Core Team [ 50.218190] Bridge firewalling registered ** Model information Hardware : Marvell Kirkwood (Flattened Device Tree) Revision : 0000 ** Loaded modules: bridge xt_multiport iptable_filter ip_tables x_tables nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc 8021q garp stp mrp llc loop evdev marvell hmac ehci_orion ehci_hcd sha1_generic mvmdio mv643xx_eth of_mdio libphy usbcore mv_cesa usb_common orion_wdt gpio_keys ext4 mbcache jbd2 dm_mod raid1 md_mod sd_mod crc_t10dif crct10dif_common sata_mv libata scsi_mod ** PCI devices: ** USB devices: Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 7.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (400, 'testing') Architecture: armel (armv5tel) Kernel: Linux 3.12-0.bpo.1-kirkwood Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.12-0.bpo.1-kirkwood depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.12-0.bpo.1-kirkwood recommends: ii firmware-linux-free 3.2 ii uboot-mkimage 2012.04.01-2 Versions of packages linux-image-3.12-0.bpo.1-kirkwood suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.12 <none> Versions of packages linux-image-3.12-0.bpo.1-kirkwood is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.40~bpo70+1 ii firmware-linux-nonfree 0.40~bpo70+1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information excluded -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140115005539.9223.14361.report...@qnap.eppo.yi.org
