Package: src:linux
Version: 3.11.8-1
Severity: normal
I recently (2013-11-23) reinstalled my system from scratch with Wheezy
and then immediately upgraded to sid. Before upgrading, I tested
recording audio from the line0 input in my sound card (Intel PCH ALC889,
the built-in sound card on my Gigabyte Z68MA-D2H-B3 motherboard), and it
worked fine. After the upgrade, it no longer worked. The original
kernel, vmlinuz-3.2.0-4-amd64, is still present on my system. If I
reboot using that kernel, recording from my sound card works. If I boot
from my current kernel, recording from my sound card does not work, but
playback works fine. Other than the information automatically attached,
I'm not sure what else I should information I should gather up to attach
to this report. Here's the output of amixer:
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 62108 [95%] [on]
Front Right: Playback 62108 [95%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 13589 [21%] [on]
Front Right: Capture 13589 [21%] [on]
You can see that capture is enabled. In any case, getting this to work
with the 3.2 kernel is trivial, and I have reproduced this using a
debian-live image (my custom Wheezy image, just built today, which
includes audacity, pulseaudio, and pavucontrol). I just run pavucontrol
to enable playback, to volume on the output device and input devices,
and to select "Line In" as the port. After doing this, with the 3.2
kernel, recording "just works". With the 3.11 kernel, I get no sound
input. As far as I can tell, the only variable is the kernel version
that I am running. I'm not sure whether there's an issue with the mixer
(seems unlikely as the mixer settings look okay) or alsactl, or
something else. I don't see any hints in any logs as to what might be
the problem.
To gather additional information, it is possible for me to run something
booted with the 3.2 kernel and then run it again with the 3.11 kernel
and attach both to the bug report. /etc/init.d/alsa-utils start reports
lots of errors with both kernel versions, but the errors look like it's
just that it's trying to enable lots of ports that I don't have on my
very simple, built-in sound card.
Given that simply rebooting into a different kernel is, by itself,
sufficient to make this work or not work, I assume that it's either a
driver/kernel problem or some user-space program that has not been
updated to work with the new kernel. For kicks, I booted my system off
an Ubuntu live 13.10 CD and I couldn't get audio to work there either.
That's also using a newer kernel than 3.2 though I don't specifically
remember what kernel it was.
-- Package-specific info:
** Version:
Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1
(Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64 root=/dev/mapper/soup0-root20131123 ro
quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 4.891150] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x1a
[ 4.891391] platform microcode: firmware: agent aborted loading
intel-ucode/06-2a-07 (not found?)
[ 4.891468] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.908827] [drm] Initialized drm 1.1.0 20060810
[ 4.927356] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.093601] [drm] Memory usable by graphics device = 2048M
[ 5.093606] i915 0000:00:02.0: setting latency timer to 64
[ 5.104833] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 5.104838] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.104839] [drm] Driver supports precise vblank timestamp query.
[ 5.104867] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.117233] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 5.117234] [drm] This can cause pipe underruns and display issues.
[ 5.117235] [drm] Please upgrade your BIOS to fix this.
[ 5.186408] fbcon: inteldrmfb (fb0) is primary device
[ 5.373088] Console: switching to colour frame buffer device 210x65
[ 5.377690] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.377692] i915 0000:00:02.0: registered panic notifier
[ 5.377734] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.377981] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.406792] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.421160] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.421217] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.421257] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.421295] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.421331] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.421366] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.815515] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7.868917] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 8.027459] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 8.185159] Adding 2097148k swap on /dev/mapper/soup0-swap. Priority:-1
extents:1 across:2097148k
[ 8.411016] loop: module loaded
[ 8.443300] fuse init (API version 7.22)
[ 8.494743] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 8.503962] XFS (dm-10): Mounting Filesystem
[ 8.568506] XFS (dm-10): Ending clean mount
[ 8.609449] XFS (dm-17): Mounting Filesystem
[ 8.703149] XFS (dm-17): Ending clean mount
[ 8.724780] XFS (dm-6): Mounting Filesystem
[ 8.795465] XFS (dm-6): Ending clean mount
[ 8.819785] XFS (dm-11): Mounting Filesystem
[ 8.878426] XFS (dm-11): Ending clean mount
[ 8.906494] XFS (dm-9): Mounting Filesystem
[ 8.999225] XFS (dm-9): Ending clean mount
[ 9.011741] XFS (dm-2): Mounting Filesystem
[ 9.138384] XFS (dm-2): Ending clean mount
[ 9.155771] EXT4-fs (dm-18): mounted filesystem with ordered data mode.
Opts: (null)
[ 9.174697] XFS (dm-14): Mounting Filesystem
[ 9.311539] XFS (dm-14): Ending clean mount
[ 9.337880] XFS (dm-12): Mounting Filesystem
[ 9.398124] XFS (dm-12): Ending clean mount
[ 9.444673] XFS (dm-3): Mounting Filesystem
[ 9.513087] XFS (dm-3): Ending clean mount
[ 9.528745] XFS (dm-4): Mounting Filesystem
[ 9.591104] XFS (dm-4): Ending clean mount
[ 9.617949] XFS (dm-5): Mounting Filesystem
[ 9.831510] XFS (dm-5): Ending clean mount
[ 9.848118] XFS (dm-8): Mounting Filesystem
[ 9.910841] XFS (dm-8): Ending clean mount
[ 11.146721] RPC: Registered named UNIX socket transport module.
[ 11.146724] RPC: Registered udp transport module.
[ 11.146725] RPC: Registered tcp transport module.
[ 11.146726] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.174655] FS-Cache: Loaded
[ 11.191085] FS-Cache: Netfs 'nfs' registered for caching
[ 11.209476] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 16.287913] Bluetooth: Core ver 2.16
[ 16.287921] NET: Registered protocol family 31
[ 16.287922] Bluetooth: HCI device and connection manager initialized
[ 16.287927] Bluetooth: HCI socket layer initialized
[ 16.287928] Bluetooth: L2CAP socket layer initialized
[ 16.287931] Bluetooth: SCO socket layer initialized
[ 16.364352] Bluetooth: RFCOMM TTY layer initialized
[ 16.364361] Bluetooth: RFCOMM socket layer initialized
[ 16.364362] Bluetooth: RFCOMM ver 1.11
[ 16.393054] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.393057] Bluetooth: BNEP filters: protocol multicast
[ 16.393061] Bluetooth: BNEP socket layer initialized
[ 16.885535] vboxdrv: Found 8 processor cores.
[ 16.885793] vboxdrv: fAsync=0 offMin=0x342 offMax=0x1d3a4
[ 16.885856] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 16.885858] vboxdrv: Successfully loaded version 4.2.18 (interface
0x001a0005).
[ 16.901792] lp: driver loaded but no devices found
[ 16.907777] ppdev: user-space parallel port driver
[ 17.536654] vboxpci: IOMMU not found (not registered)
[ 17.922396] r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw
into memory
[ 18.038632] r8169 0000:02:00.0 eth0: link down
[ 18.038658] r8169 0000:02:00.0 eth0: link down
[ 18.038678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.336514] systemd-logind[3305]: New seat seat0.
[ 19.343524] systemd-logind[3305]: Watching system buttons on
/dev/input/event4 (Power Button)
[ 19.343575] systemd-logind[3305]: Watching system buttons on
/dev/input/event3 (Power Button)
[ 19.344087] systemd-logind[3305]: New session 1 of user Debian-gdm.
[ 19.344170] systemd-logind[3305]: Linked /tmp/.X11-unix/X0 to
/run/user/112/X11-display.
[ 20.165280] r8169 0000:02:00.0 eth0: link up
[ 20.165286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.044626] systemd-logind[3305]: New session 2 of user ejb.
[ 28.044677] systemd-logind[3305]: Linked /tmp/.X11-unix/X0 to
/run/user/417/X11-display.
[ 95.436020] systemd-logind[3305]: Removed session 1.
[ 97.786651] systemd-logind[3305]: Failed to issue method call: Launch helper
exited with unknown return code 1
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z68MA-D2H-B3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z68MA-D2H-B3
board_version: x.x
** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
parport_pc
ppdev
lp
parport
vboxdrv(O)
bnep
rfcomm
bluetooth
rfkill
snd_hrtimer
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
xfs
libcrc32c
fuse
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
x86_pkg_temp_thermal
coretemp
kvm_intel
kvm
snd_hda_intel
i915
snd_hda_codec
snd_hwdep
snd_pcm
video
snd_page_alloc
crc32c_intel
ghash_clmulni_intel
snd_seq
snd_seq_device
mxm_wmi
aesni_intel
drm_kms_helper
mperf
aes_x86_64
ablk_helper
drm
cryptd
lrw
gf128mul
glue_helper
snd_timer
snd
iTCO_wdt
iTCO_vendor_support
processor
button
wmi
i2c_algo_bit
lpc_ich
mfd_core
mei_me
mei
soundcore
thermal_sys
pcspkr
i2c_i801
i2c_core
microcode
evdev
ext4
crc16
mbcache
jbd2
dm_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
hid_generic
usbhid
hid
ahci
libahci
libata
xhci_hcd
ehci_pci
scsi_mod
ehci_hcd
usbcore
r8169
mii
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 50:e5:49:48:49:33 brd ff:ff:ff:ff:ff:ff
inet 10.160.59.17/24 brd 10.160.59.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::52e5:49ff:fe48:4933/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 2724192 2546 0 0 0 0 0 0 211458
1818 0 0 0 0 0 0
lo: 7468 53 0 0 0 0 0 0 7468
53 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2326 total packets received
0 forwarded
0 incoming packets discarded
2325 incoming packets delivered
1784 requests sent out
56 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
49 active connections openings
2 passive connection openings
8 failed connection attempts
9 connection resets received
2 connections established
2133 segments received
1616 segments send out
0 segments retransmited
6 bad segments received.
17 resets sent
Udp:
236 packets received
0 packets to unknown port received.
0 packet receive errors
203 packets sent
UdpLite:
TcpExt:
9 TCP sockets finished time wait in fast timer
48 delayed acks sent
48 packets directly queued to recvmsg prequeue.
113 bytes directly in process context from backlog
110 bytes directly received in process context from prequeue
1632 packet headers predicted
1 packets header predicted and directly queued to user
153 acknowledgments not containing data payload received
113 predicted acknowledgments
9 connections reset due to early user close
TCPRcvCoalesce: 230
TCPOFOQueue: 33
TCPChallengeACK: 6
TCPSYNChallenge: 6
IpExt:
InNoRoutes: 1
InMcastPkts: 28
OutMcastPkts: 29
InBcastPkts: 47
OutBcastPkts: 25
InOctets: 2682238
OutOctets: 182275
InMcastOctets: 4428
OutMcastOctets: 4057
InBcastOctets: 4741
OutBcastOctets: 3071
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0100] (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ff00 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfa00000-dfbfffff
Prefetchable memory behind bridge: 00000000dfc00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000fbd00000-00000000fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 8 [8086:1c1e] (rev b5) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Z68 Express Chipset Family LPC
Controller [8086:1c44] (rev 05)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fd00 [size=4]
Region 2: I/O ports at fc00 [size=8]
Region 3: I/O ports at fb00 [size=4]
Region 4: I/O ports at fa00 [size=32]
Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host
Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at fbef8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-20
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20131126214520.0408859139.qww314...@soup.q.qbilt.org
