Package: src:linux
Version: 3.10.7-1
Severity: important
-- Package-specific info:
** Version:
Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version
4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.7-1 (2013-08-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64
root=UUID=646f1072-b05f-486e-90cf-e90dc8077acd ro i915.i915_enable_rc6=0
intel_pstate=disable
** Not tainted
** Kernel log:
[ 1.768486] usb 1-1.3: Product: Mass Storage Device
[ 1.768540] usb 1-1.3: Manufacturer: USB2.0 External
[ 1.768592] usb 1-1.3: SerialNumber: 2010122700000000179
[ 1.770459] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 1.770554] scsi4 : usb-storage 1-1.3:1.0
[ 1.770671] usbcore: registered new interface driver usb-storage
[ 1.816137] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.075860] systemd-udevd[398]: starting version 204
[ 2.167609] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 2.167691] ACPI: Power Button [PWRB]
[ 2.167810] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.167873] ACPI: Power Button [PWRF]
[ 2.168974] mei_me 0000:00:16.0: setting latency timer to 64
[ 2.169007] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 2.171369] ACPI: Requesting acpi_cpufreq
[ 2.192166] [drm] Initialized drm 1.1.0 20060810
[ 2.203915] [drm] Memory usable by graphics device = 2048M
[ 2.203981] i915 0000:00:02.0: setting latency timer to 64
[ 2.219215] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 2.219229] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.219292] [drm] Driver supports precise vblank timestamp query.
[ 2.219469] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.229923] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2.229986] [drm] This can cause pipe underruns and display issues.
[ 2.230054] [drm] Please upgrade your BIOS to fix this.
[ 2.233496] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.295511] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[ 2.298591] fbcon: inteldrmfb (fb0) is primary device
[ 2.304455] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[ 2.304479] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[ 2.304495] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[ 2.304508] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[ 2.304520] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[ 2.304532] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[ 2.304544] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[ 2.304597] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.315620] kvm: disabled by bios
[ 2.557864] Console: switching to colour frame buffer device 210x65
[ 2.562907] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.562935] i915 0000:00:02.0: registered panic notifier
[ 2.577480] acpi device:4c: registered as cooling_device9
[ 2.577686] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 2.577776] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 2.577900] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 2.577994] ACPI Warning: 0x0000000000000428-0x000000000000042f
SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 2.578066] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 2.578124] ACPI Warning: 0x0000000000000540-0x000000000000054f
SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 2.578192] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 2.578246] ACPI Warning: 0x0000000000000530-0x000000000000053f
SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 2.578315] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 2.578371] ACPI Warning: 0x0000000000000500-0x000000000000052f
SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 2.578440] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 2.578498] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.578772] ACPI Warning: 0x000000000000f040-0x000000000000f05f
SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1
(20130328/utaddress-251)
[ 2.578853] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 2.579214] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 2.601016] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.601126] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.601217] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.601303] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.601387] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.770806] scsi 4:0:0:0: CD-ROM slimtype eTDU108 1
SL46 PQ: 0 ANSI: 0
[ 2.771749] scsi 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.791164] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda pop-up
[ 2.791228] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.791486] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.976912] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1
across:2097148k SS
[ 3.001322] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.176007] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
[ 3.395809] fuse init (API version 7.22)
[ 3.408905] loop: module loaded
[ 3.422169] bio: create slab <bio-1> at 1
[ 3.433088] w83627ehf: Found NCT6775F chip at 0xa00
[ 3.440589] i2c /dev entries driver
[ 3.813209] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
[ 4.010932] RPC: Registered named UNIX socket transport module.
[ 4.012621] RPC: Registered udp transport module.
[ 4.014248] RPC: Registered tcp transport module.
[ 4.015826] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.023456] FS-Cache: Loaded
[ 4.025568] Key type dns_resolver registered
[ 4.031824] FS-Cache: Netfs 'nfs' registered for caching
[ 4.040131] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 4.225341] e1000e 0000:00:19.0 eth0: changing MTU from 1500 to 1480
[ 4.501168] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.604663] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.604788] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.280259] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 5.356882] ata1.00: configured for UDMA/133
[ 5.356886] ata1: EH complete
[ 11.707726] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 11.707761] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.903671] EXT4-fs (dm-1): mounted filesystem with ordered data
mode. Opts: (null)
[34551.624640] ehci-pci 0000:00:1d.0: setting latency timer to 64
[34555.364468] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[34557.577297] systemd-udevd[10870]: starting version 204
[34559.540225] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[34559.540245] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[34559.540259] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[34559.540272] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: BEH6110H.86A.0117.2013.0704.1354
board_vendor: Intel Corporation
board_name: DH61DL
board_version: AAG14066-202
** Loaded modules:
cpuid
cbc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
cpufreq_conservative
cpufreq_stats
i2c_dev
w83627ehf
hwmon_vid
loop
fuse
ecryptfs
sr_mod
cdrom
snd_hda_codec_realtek
coretemp
kvm
microcode
evdev
psmouse
snd_hda_intel
pcspkr
snd_hda_codec
serio_raw
snd_hwdep
snd_pcm_oss
snd_mixer_oss
i2c_i801
snd_pcm
lpc_ich
mfd_core
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
i915
snd_seq
snd_seq_device
drm_kms_helper
snd_timer
drm
i2c_algo_bit
i2c_core
snd
acpi_cpufreq
mperf
soundcore
processor
video
mei_me
button
mei
ext4
crc16
jbd2
mbcache
usb_storage
md_mod
sha256_generic
dm_crypt
dm_mod
hid_generic
sg
usbhid
hid
sd_mod
crc_t10dif
crc32c_intel
ahci
xhci_hcd
libahci
ghash_clmulni_intel
cryptd
libata
scsi_mod
ehci_pci
e1000e
ehci_hcd
ptp
pps_core
usbcore
usb_common
fan
thermal
thermal_sys
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.2
netmask 255.255.255.0
gateway 192.168.1.1
mtu 1480
dns-nameservers 192.168.1.1
iface wlan0 inet dhcp
mtu 1492
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1480 qdisc pfifo_fast
state UP group default qlen 1000
link/ether e0:69:95:77:3d:9b brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 24195613 31269 0 0 0 0 0 285
4657280 21114 0 0 0 0 0 0
lo: 23262 107 0 0 0 0 0 0
23262 107 0 0 0 0 0 0
*** Protocol statistics:
Ip:
24285 total packets received
0 forwarded
0 incoming packets discarded
24285 incoming packets delivered
20439 requests sent out
16 outgoing packets dropped
1 dropped because of missing route
Icmp:
34 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 34
34 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 34
IcmpMsg:
InType3: 34
OutType3: 34
Tcp:
530 active connections openings
2 passive connection openings
6 failed connection attempts
3 connection resets received
4 connections established
22729 segments received
19623 segments send out
58 segments retransmited
27 bad segments received.
57 resets sent
Udp:
1069 packets received
32 packets to unknown port received.
0 packet receive errors
954 packets sent
UdpLite:
TcpExt:
278 TCP sockets finished time wait in fast timer
278 delayed acks sent
Quick ack mode was activated 16 times
3 packets directly queued to recvmsg prequeue.
16420 packet headers predicted
1302 acknowledgments not containing data payload received
3471 predicted acknowledgments
6 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
33 fast retransmits
4 other TCP timeouts
TCPLossProbes: 10
TCPLossProbeRecovery: 6
15 DSACKs sent for old packets
10 DSACKs received
20 connections reset due to unexpected data
3 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 4
TCPSackShifted: 23
TCPSackMerged: 55
TCPSackShiftFallback: 34
TCPRcvCoalesce: 2748
TCPOFOQueue: 216
TCPChallengeACK: 27
TCPSYNChallenge: 27
IpExt:
InMcastPkts: 603
OutMcastPkts: 320
InBcastPkts: 149
OutBcastPkts: 149
InOctets: 23309608
OutOctets: 4258948
InMcastOctets: 21992
OutMcastOctets: 12952
InBcastOctets: 30767
OutBcastOctets: 30767
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
Processor Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
Generation Core Processor Family Integrated Graphics Controller
[8086:0102] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200
Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7d2b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit
Network Connection [8086:1503] (rev 05)
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7d00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7d29000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d28000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series
Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f7d20000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d27000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family
LPC Controller [8086:1c5c] (rev 05)
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series
Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d26000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset
Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d25000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Device [8086:200e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 1c6b:a222 Philips & Lite-ON Digital Solutions
Corporation DVD Writer Slimtype eTAU108
Bus 001 Device 004: ID 0566:3002 Monterey International Corp.
Bus 001 Device 003: ID 0f62:1001 Acrox Technologies Co., Ltd Targus Mini
Trackball Optical Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.40
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-2-amd64/postinst/missing-firmware-3.10-2-amd64:
linux-image-3.10-2-amd64/postinst/depmod-error-initrd-3.10-2-amd64: false
linux-image-3.10-2-amd64/prerm/removing-running-kernel-3.10-2-amd64: true
----- cut here -----
Hello,
I'm loathe to submit this bug report as I have no logs backing me up and no
sure way to reproduce the result. But here goes.
Sometime in the last couple of months my system started to reset/reboot
sometimes when decoding videos (playing them), and always when encoding
them.
However, when it would occur was not predictable, and didn't occur when the
system was in general use. The system is as follows.
Motherboard: Intel DH61DL, with H61 chipset.
CPU: Sandybridge Core I3 3100.
BIOS: 0117 (latest).
SSD: Samsung 470.
RAM: Kingston Hyper Blu DDR3 (8GB).
There was nothing in the system logs about the resetting, nor in the BIOS
logs.
I tested a few things, such as the i915 module, power connections, etc.
Although it looked like a thermal event reset, lm-sensors, etc., indicated
that it was running well within specs (never above 78C on CPU and 70C on
PCH).
However, I started to give power/heat a much closer look. I checked the
output of the power supply, which looked okay. I took the system apart,
cleaned it, and put new thermal compound on the CPU and PCH heatsinks. I
tested it by running a number of "cpuburn" instances, and got the
temperature
above these points without any difficulties, while when encoding a video it
now ran 7-10C cooler. But, still, when encoding, it reset.
Finally, I noticed that the CPU governor wasn't the one I standardly
used. I
had been using the conservative governor, with some settings from an IBM
Whitepaper I read some time ago. Frankly, I hadn't noticed the switch
to the
new intel_pstate system. Since I had governor modules loaded manually (in
/etc/modules), and settings for the old system (in /etc/rc.local), I thought
that I had been silly and that there was a bad interaction between systems.
So, I cleaned all that up and set things up to use the pstate system
only. No
improvement.
In the end, I reverted to the old scaling system by using the boot parameter
"intel_pstate=disable", the conservative governer and my old settings.
That solved the problem, and I encoded a video without difficulties.
My setup for cpu scaling is as follows.
Load modules (/etc/modules):
acpi-cpufreq
cpufreq_stats
cpufreq_conservative
Set values (/etc/rc.local):
echo "conservative" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo "conservative" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo "conservative" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo "conservative" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
echo "98" > /sys/devices/system/cpu/cpufreq/conservative/up_threshold
echo "95" > /sys/devices/system/cpu/cpufreq/conservative/down_threshold
echo 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step
----- cut here -----
Best wishes,
Bob
--
Robert L. Frazier email: robert.fraz...@chch.ox.ac.uk
Christ Church
Oxford OX1 1DP www: http://kant1.chch.ox.ac.uk
UK
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/52440b85.1090...@chch.ox.ac.uk
