On Mon, 26 Aug 2013 11:06:52 -0400 Russ H <chairman.fa...@gmail.com> wrote:
> I compiled a vanilla 3.10.8 kernel on my DNS-323 arm box... still getting > this bug: Hello, Did you do a full power-off of your device after running a previous unpatched version on it? Because as I found out, booting a bugged kernel even once locks-up the bus "for good" and merely rebooting the DNS-323 doesn't restore access. Try doing a full power-off including disconnecting the power cord before trying the new kernel. (Of course the problem could be something else entirely). > > root@a110755:~# uname -r > 3.10.8-orion5x > root@a110755:~# pwmconfig > # pwmconfig revision 5857 (2010-08-22) > This program will search your sensors for pulse width modulation (pwm) > controls, and test each one to see if it controls a fan on > your motherboard. Note that many motherboards do not have pwm > circuitry installed, even if your sensor chip supports pwm. > We will attempt to briefly stop each fan using the pwm controls. > The program will attempt to restore each fan to full speed > after testing. However, it is ** very important ** that you > physically verify that the fans have been to full speed > after the program has completed. > Found the following devices: > hwmon0/device is g760a > Found the following PWM controls: > hwmon0/device/pwm1 > [ 382.279864] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > [ 384.279860] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > [ 386.279861] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > [ 388.279859] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > Giving the fans some time to reach full speed... > Found the following fan sensors: > [ 395.349854] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > [ 397.349861] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > [ 399.349853] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > hwmon0/device/fan1_input current speed: 0 ... skipping! > There are no working fan sensors, all readings are 0. > Make sure you have a 3-wire fan connected. > You may also need to increase the fan divisors. > See doc/fan-divisors for more information. -- With respect, Roman
signature.asc
Description: PGP signature
