Your message dated Tue, 20 Aug 2013 18:08:04 +0200 with message-id <20130820160804.gc16...@inutil.org> and subject line Re: Real-time kernel freezes immediately at boot most of the time has caused the Debian Bug report #664725, regarding linux-image-3.2.0-2-rt-686-pae: Real-time kernel freezes immediately at boot most of the time to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 664725: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=664725 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-2.6 Version: 3.2.10-1 Severity: important Tags: lfs When trying to boot the 3.2.0-2-rt-686 kernel on my machine it freezes most of the time. In particular just after grub finishes loading the kernel and the initrd and proceeds to boot the kernel the message "Loading Linux" or something of that sort appears, the cursor blinks a couple of times (so far everything as usual) but then the cursor stops blinking and disappears completely and the system is completely unresponsive. Caps Lock, alt+sysrq+... and other keys don't have any effect. Normally, the message that appears immediately after this on my pc, when a normal kernel is run, is a debug message from udev (I think) described in: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=654282 but that is NOT fatal and is present on all kernels (even the non rt ones). However in this case nothing of the sort is displayed. This problem seems very similar to the one in bug report 63269: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=663269 that has been said to be fixed. As a matter of fact I have noticed one difference: with version 3.2.10-1 (current), if I load a normal, non-rt kernel first then restart my pc and load the rt kernel the machine usually starts and doesn't hang and works perfectly, while normally (for example running the rt kernel for two times in a row) causes the machine to freeze. On the other hand, with version 3.2.9-1 there was absolutely nothing to be done to make the machine boot with the rt-kernel. This strange behaviour makes me suspect that something may depend on the way grub is booting the kernel (maybe some options that persist across boots). However I have no idea how to debug this. If someone gives me some hints I would be willing to provide any additional information. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03) Subsystem: IBM Thinkpad T40 series [1014:0529] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0100000-c01fffff Prefetchable memory behind bridge: e0000000-e7ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at 1800 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) Subsystem: IBM ThinkPad [1014:052e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=08, sec-latency=64 I/O behind bridge: 00004000-00008fff Memory behind bridge: c0200000-cfffffff Prefetchable memory behind bridge: e8000000-efffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: IBM ThinkPad [1014:052d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01) Subsystem: IBM ThinkPad [1014:052d] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: i801_smbus 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) Subsystem: IBM ThinkPad T41 [1014:0537] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: snd_intel8x0 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic]) Subsystem: IBM ThinkPad [1014:0525] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: snd_intel8x0m 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA controller]) Subsystem: IBM ThinkPad T42 2373-4WU [1014:0530] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at c0120000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01) Subsystem: IBM ThinkPad [1014:0552] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: cc000000-cffff000 (prefetchable) Memory window 1: c8000000-cbfff000 I/O window 0: 00004c00-00004cff I/O window 1: 00004800-000048ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01) Subsystem: IBM ThinkPad [1014:0552] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=07, subordinate=07, sec-latency=176 Memory window 0: ec000000-effff000 (prefetchable) Memory window 1: c4000000-c7fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004000-000040ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) [8086:101e] (rev 03) Subsystem: IBM Thinkpad [1014:0549] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K] Region 2: I/O ports at 8000 [size=64] [virtual] Expansion ROM at e8000000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: e1000 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter [8086:1043] (rev 04) Subsystem: Intel Corporation Device [8086:2551] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0210000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2100 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 003 Device 003: ID 073a:2230 Chaplet Systems, Inc. infrared dongle for remote -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-rt-686-pae depends on: ii debconf [debconf-2.0] 1.5.42 ii initramfs-tools [linux-initramfs-tool] 0.101 ii kmod 6-2 ii linux-base 3.5 ii module-init-tools 6-2 Versions of packages linux-image-3.2.0-2-rt-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-27 Versions of packages linux-image-3.2.0-2-rt-686-pae suggests: ii grub-pc 1.99-17 ii linux-doc-3.2 3.2.10-1 Versions of packages linux-image-3.2.0-2-rt-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 0.35 pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux 0.35 pn firmware-linux-nonfree 0.35 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-rt-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-2-rt-686-pae/postinst/depmod-error-initrd-3.2.0-2-rt-686-pae: false linux-image-3.2.0-2-rt-686-pae/prerm/removing-running-kernel-3.2.0-2-rt-686-pae: true linux-image-3.2.0-2-rt-686-pae/postinst/missing-firmware-3.2.0-2-rt-686-pae:# # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="${saved_entry}" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768x16 load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm set timeout=2 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 insmod png if background_image /usr/share/images/desktop-base/spacefun-grub.png; then set color_normal=light-gray/black set color_highlight=white/black else set menu_color_normal=cyan/blue set menu_color_highlight=white/blue fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Debian GNU/Linux, with Linux 3.2.0-2-rt-686-pae' --class debian --class gnu-linux --class gnu --class os { savedefault load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.2.0-2-rt-686-pae ...' linux /boot/vmlinuz-3.2.0-2-rt-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-2-rt-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.2.0-2-rt-686-pae (recovery mode)' --class debian --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.2.0-2-rt-686-pae ...' linux /boot/vmlinuz-3.2.0-2-rt-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-2-rt-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.2.0-2-686-pae' --class debian --class gnu-linux --class gnu --class os { savedefault load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.2.0-2-686-pae ...' linux /boot/vmlinuz-3.2.0-2-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-2-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.2.0-2-686-pae (recovery mode)' --class debian --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.2.0-2-686-pae ...' linux /boot/vmlinuz-3.2.0-2-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-2-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.2.0-1-686-pae' --class debian --class gnu-linux --class gnu --class os { savedefault load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.2.0-1-686-pae ...' linux /boot/vmlinuz-3.2.0-1-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-1-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.2.0-1-686-pae (recovery mode)' --class debian --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.2.0-1-686-pae ...' linux /boot/vmlinuz-3.2.0-1-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-1-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.1.0-1-686-pae' --class debian --class gnu-linux --class gnu --class os { savedefault load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.1.0-1-686-pae ...' linux /boot/vmlinuz-3.1.0-1-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.1.0-1-686-pae } menuentry 'Debian GNU/Linux, with Linux 3.1.0-1-686-pae (recovery mode)' --class debian --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 echo 'Loading Linux 3.1.0-1-686-pae ...' linux /boot/vmlinuz-3.1.0-1-686-pae root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.1.0-1-686-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###
--- End Message ---
--- Begin Message ---On Wed, Apr 11, 2012 at 07:15:42PM -0500, Jonathan Nieder wrote: > Hi, > > Gennady N. Uraltsev wrote: > > > I will try to take a photo and to copy the info that gets > > displayed. > > No need to do manual OCR. A photo is good enough. > > Thanks and hope that helps, > Jonathan No further feedback, closing. If this still affects Wheezy or later, please reopen. Cheers, Moritz
--- End Message ---
