Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
The mv_cesa module seems to be broken (both in 3.2 stable kernel and
3.9). Symptoms: If I have mv_cesa loaded, do a cryptsetup open and
then a pvscan it doesn't find any suitable volumes. If I unload
mv_cesa before cryptsetup open, everything works fine. This *seems* to
be a somewhat known problem but should be, as far as I understand,
solved before 3.9 (which is the reason I tried 3.9). It is, however,
still showing there as well. I'm trying the 3.10 kernel now
Christoph
-- Package-specific info:
** Version:
Linux version 3.9-0.bpo.1-kirkwood (debian-kernel@lists.debian.org) (gcc
version 4.7.2 (Debian 4.7.2-5) ) #1 Debian 3.9.6-1~bpo70+1
** Command line:
root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
** Not tainted
** Kernel log:
[ 72.698194]
[ 72.698265]
[ 72.698336]
[ 72.698408]
[ 72.698479]
[ 72.698553]
[ 72.698657]
[ 72.700871]
[ 72.703237]
[ 72.703449]
[ 74.094157] udevd[447]: starting version 175
[ 74.651014] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 74.835844] usbcore: registered new interface driver usbfs
[ 74.835949] usbcore: registered new interface driver hub
[ 74.842620] usbcore: registered new device driver usb
[ 74.909213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 74.950312] xhci_hcd 0000:01:01.0: xHCI Host Controller
[ 74.950385] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus
number 1
[ 74.950808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 74.950846] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 74.950874] usb usb1: Product: xHCI Host Controller
[ 74.950897] usb usb1: Manufacturer: Linux 3.9-0.bpo.1-kirkwood xhci_hcd
[ 74.950920] usb usb1: SerialNumber: 0000:01:01.0
[ 74.951409] xHCI xhci_add_endpoint called for root hub
[ 74.951417] xHCI xhci_check_bandwidth called for root hub
[ 74.951662] hub 1-0:1.0: USB hub found
[ 74.951718] hub 1-0:1.0: 2 ports detected
[ 74.952003] xhci_hcd 0000:01:01.0: xHCI Host Controller
[ 74.952047] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus
number 2
[ 74.952136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 74.952167] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 74.952194] usb usb2: Product: xHCI Host Controller
[ 74.952217] usb usb2: Manufacturer: Linux 3.9-0.bpo.1-kirkwood xhci_hcd
[ 74.952240] usb usb2: SerialNumber: 0000:01:01.0
[ 74.954890] xHCI xhci_add_endpoint called for root hub
[ 74.954900] xHCI xhci_check_bandwidth called for root hub
[ 74.957249] hub 2-0:1.0: USB hub found
[ 74.957323] hub 2-0:1.0: 2 ports detected
[ 74.991892] ehci-orion: EHCI orion driver
[ 75.073148] orion_wdt: Initial timeout 21 sec
[ 75.073743] orion-ehci orion-ehci.0: EHCI Host Controller
[ 75.073805] orion-ehci orion-ehci.0: new USB bus registered, assigned bus
number 3
[ 75.073967] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 75.091216] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 75.091327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 75.091359] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 75.091387] usb usb3: Product: EHCI Host Controller
[ 75.091409] usb usb3: Manufacturer: Linux 3.9-0.bpo.1-kirkwood ehci_hcd
[ 75.091433] usb usb3: SerialNumber: orion-ehci.0
[ 75.091858] hub 3-0:1.0: USB hub found
[ 75.091906] hub 3-0:1.0: 1 port detected
[ 75.411222] usb 3-1: new high-speed USB device number 2 using orion-ehci
[ 75.562981] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608
[ 75.563045] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 75.563072] usb 3-1: Product: USB2.0 Hub
[ 75.564265] hub 3-1:1.0: USB hub found
[ 75.564606] hub 3-1:1.0: 4 ports detected
[ 76.539311] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 76.856608] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 77.571414] loop: module loaded
[ 79.684918] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 79.742391] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 79.801780] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 79.858010] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
(null)
[ 81.417984] RPC: Registered named UNIX socket transport module.
[ 81.418044] RPC: Registered udp transport module.
[ 81.418067] RPC: Registered tcp transport module.
[ 81.418088] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 81.447038] FS-Cache: Loaded
[ 81.454311] Key type dns_resolver registered
[ 81.507694] FS-Cache: Netfs 'nfs' registered for caching
[ 81.585295] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 86.593205] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 88.110251] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 88.122280] NFSD: starting 90-second grace period (net c0513db8)
[ 89.327218] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s,
full duplex, flow control disabled
[ 203.642744] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 203.642783] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 271.806746] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 274.519522] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s,
full duplex, flow control disabled
[ 437.735515] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 437.735557] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 455.638653] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 455.638698] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 519.603271] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 519.603314] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 569.880774] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 569.880814] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 796.913756] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 799.730805] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s,
full duplex, flow control disabled
[ 879.019458] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 881.977946] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s,
full duplex, flow control disabled
[ 935.236218] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 935.236273] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 941.527928] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 944.406428] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s,
full duplex, flow control disabled
[ 1033.372512] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 1033.372568] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet
spanning multiple descriptors
[ 1350.205625] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 1352.937982] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s,
full duplex, flow control disabled
** Model information
Hardware : QNAP TS-41x
Revision : 0000
** Loaded modules:
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
hmac
evdev
ehci_orion
sha1_generic
xhci_hcd
ehci_hcd
orion_wdt
usbcore
mv_cesa
usb_common
gpio_keys
ext4
mbcache
jbd2
dm_crypt
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
md_mod
netconsole
configfs
cbc
xts
gf128mul
sd_mod
crc_t10dif
sata_mv
mv643xx_eth
inet_lro
libphy
libata
scsi_mod
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 10.3.2.21
netmask 255.0.0.0
gateway 10.0.0.0
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 172.16.0.1
dns-search siccegge.de
iface eth0 inet6 static
address 2001:4dd0:ff00:8384::2
gateway 2001:4dd0:ff00:8384::1
netmask 64
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:08:9b:d1:4b:10 brd ff:ff:ff:ff:ff:ff
inet 10.3.2.21/8 brd 10.255.255.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::208:9bff:fed1:4b10/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:08:9b:d1:4b:11 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 260 4 0 0 0 0 0 0 260
4 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 127488042 133737 17071 17080 0 0 0 0 88917294
125020 0 0 0 0 0 0
*** Protocol statistics:
Ip:
106682 total packets received
0 forwarded
0 incoming packets discarded
106445 incoming packets delivered
78355 requests sent out
Icmp:
38 ICMP messages received
38 input ICMP message failed.
ICMP input histogram:
destination unreachable: 38
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 38
Tcp:
24 active connections openings
5 passive connection openings
0 failed connection attempts
1 connection resets received
3 connections established
99965 segments received
123725 segments send out
387 segments retransmited
0 bad segments received.
3 resets sent
Udp:
139 packets received
0 packets to unknown port received.
0 packet receive errors
150 packets sent
UdpLite:
TcpExt:
533 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 596 times
6 packets directly queued to recvmsg prequeue.
12 bytes directly received in process context from prequeue
23728 packet headers predicted
30172 acknowledgments not containing data payload received
4483 predicted acknowledgments
7 times recovered from packet loss by selective acknowledgements
25 congestion windows recovered without slow start after partial ack
51 fast retransmits
196 retransmits in slow start
122 other TCP timeouts
617 DSACKs sent for old packets
170 DSACKs sent for out of order packets
25 DSACKs received
1 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 4
TCPSackShifted: 5
TCPSackMerged: 19
TCPSackShiftFallback: 56
TCPRcvCoalesce: 34705
TCPOFOQueue: 25393
TCPOFOMerge: 170
IpExt:
InNoRoutes: 1
InMcastPkts: 210
InBcastPkts: 6093
InOctets: 99123066
OutOctets: 84324969
InMcastOctets: 8912
InBcastOctets: 772651
** PCI devices:
00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282]
(rev 01)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at <ignored> (64-bit, prefetchable)
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042
PCI-e 4-port SATA-II [11ab:7042] (rev 02)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at 1000 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0
<256ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: sata_mv
01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282]
(rev 01)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at <ignored> (64-bit, prefetchable)
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
01:01.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host
Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])
Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller
[1b6f:7023]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/4 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [a0] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
Kernel driver in use: xhci_hcd
** USB devices:
Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 3.9-0.bpo.1-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-0.bpo.1-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.112~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-0.bpo.1-kirkwood recommends:
ii firmware-linux-free 3.2
ii uboot-mkimage 2012.04.01-2
Versions of packages linux-image-3.9-0.bpo.1-kirkwood suggests:
pn debian-kernel-handbook <none>
pn fdutils <none>
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-0.bpo.1-kirkwood is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-0.bpo.1-kirkwood/postinst/depmod-error-initrd-3.9-0.bpo.1-kirkwood:
false
linux-image-3.9-0.bpo.1-kirkwood/prerm/removing-running-kernel-3.9-0.bpo.1-kirkwood:
true
linux-image-3.9-0.bpo.1-kirkwood/postinst/ignoring-ramdisk:
linux-image-3.9-0.bpo.1-kirkwood/postinst/missing-firmware-3.9-0.bpo.1-kirkwood:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130728155524.3144.58460.report...@backup.siccegge.de
