Package: src:linux Version: 3.9.6-1~bpo70+1 Severity: important Dear Maintainer,
pciback for my second SCSI controller (and for the second network card) is not working anymore after dom0 reboot. I have been running Debian kernel 2.6.32-5-xen-amd64 for more than one year on a Debian GNU/Linux Squeeze dom0 with Xen 4.0 Debian packages (hypervisor) and I could delegate both the second network card and the second SCSI controller (connected to a tape changer) to a domU with pciback and PCI Passthrough. While the domU was running, I have regularly installed the Debian updates for the kernel in dom0 and then, after the domU shutdown, I copied the kernel modules to domU (always kernel 2.6.32-xen). After that I could restart the domU and I could pass to it the two devices as I used to do before but the devices were not working anymore as expected in the domU: with lspci I could see the two devices in the domU but the device files for the tape changer were not created and the network card was not available. Then I decided to upgrade the dom0 to Debian Wheezy, Xen hypervisor 4.1 and kernel 3.2 (used also for the domU, which is still squeeze), supposing the problem could be resolved with a newer kernel but the problem was still there. Now I am trying Debian kernel 3.9-0.bpo.1-amd64, on both dom0 and domU, but even with this kernel the problem is there and the logs in the domU too: here is a snippet of the kernel logs that appear in domU when I try to pass the SCSI controller to it: -- domU logs start -- Jul 16 10:30:02 max kernel: [52888.766659] pcifront pci-0: Installing PCI frontend Jul 16 10:30:02 max kernel: [52888.766950] pcifront pci-0: Creating PCI Frontend Bus 0000:09 Jul 16 10:30:02 max kernel: [52888.767746] pci 0000:09:08.0: [1000:0030] type 0 class 0x000100 Jul 16 10:30:02 max kernel: [52888.768625] pci 0000:09:08.0: reg 10: [io 0x5000-0x50ff] Jul 16 10:30:02 max kernel: [52888.769162] pci 0000:09:08.0: reg 14: [mem 0xf9e00000-0xf9e1ffff 64bit] Jul 16 10:30:02 max kernel: [52888.769658] pci 0000:09:08.0: reg 1c: [mem 0xf9e20000-0xf9e3ffff 64bit] Jul 16 10:30:02 max kernel: [52888.775076] pci 0000:09:08.0: supports D1 D2 Jul 16 10:30:02 max kernel: [52888.781269] pcifront pci-0: claiming resource 0000:09:08.0/0 Jul 16 10:30:02 max kernel: [52888.781286] pcifront pci-0: claiming resource 0000:09:08.0/1 Jul 16 10:30:02 max kernel: [52888.781296] pci 0000:09:08.0: address space collision: [mem 0xf9e00000-0xf9e1ffff 64bit] conflicts with System RAM [mem 0x00100000-0x4007fffff] Jul 16 10:30:02 max kernel: [52888.781308] pcifront pci-0: Could not claim resource 0000:09:08.0/1! Device offline. Try using e820_host=1 in the guest config. Jul 16 10:30:02 max kernel: [52888.781325] pcifront pci-0: claiming resource 0000:09:08.0/3 Jul 16 10:30:02 max kernel: [52888.781333] pci 0000:09:08.0: address space collision: [mem 0xf9e20000-0xf9e3ffff 64bit] conflicts with System RAM [mem 0x00100000-0x4007fffff] Jul 16 10:30:02 max kernel: [52888.781349] pcifront pci-0: Could not claim resource 0000:09:08.0/3! Device offline. Try using e820_host=1 in the guest config. Jul 16 10:30:02 max kernel: [52888.782498] mptspi 0000:09:08.0: device not available (can't reserve [mem 0xf9e00000-0xf9e1ffff 64bit]) Jul 16 10:30:02 max kernel: [52888.782512] mptbase: ioc2: ERROR - pci_enable_device_mem() failed -- domU logs end -- I already use e820_host=1 and iommu=soft in the domU configuration (I have tried also without). All this sounds similar to the old pciback problem for domUs with more than 2GB ram (?) but my domU has only 2 GB ram and in any case I thought that problem was solved with Linux kernel > 3.2: wasn't it? (http://lists.xen.org/archives/html/xen-users/2013-05/msg00325.html) Thank you very much for your attention Rolf -- Package-specific info: ** Version: Linux version 3.9-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.9.6-1~bpo70+1 ** Command line: placeholder root=/dev/mapper/grp01-grp01--root ro xen-pciback.permissive xen-pciback.hide=(0000:04:00.0)(0000:09:08.0) pci=resource_alignment=0000:04:00.0;0000:09:08.0 xen-pciback.verbose_request=1 iommu=verbose nomodeset quiet Note: Actually I don't think this command line is read by the new 3.9 kernel: the dom0 doesn't load the xen-pciback module at boot and I have to use this method to (release and) bind the device to the domU: http://wiki.xen.org/wiki/Xen_PCI_Passthrough#Dynamic_assignment_with_sysfs ** Not tainted ** Kernel log: [11412.347360] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 = 5 [11412.347366] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 [11412.347371] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 = 68 [11412.347386] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 [11412.347392] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 = 7 [11412.347398] xen-pciback: 0000:09:08.0: read 1 bytes at 0x69 [11412.347403] xen-pciback: 0000:09:08.0: read 1 bytes at 0x69 = 0 [11412.347409] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 [11412.347414] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 = 230 [11412.347421] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 [11412.347426] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 = 50 [11412.347432] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 [11412.347439] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 = 5801 [11412.347454] xen-pciback: 0000:09:08.0: read 1 bytes at 0x51 [11412.347462] xen-pciback: 0000:09:08.0: read 1 bytes at 0x51 = 58 [11412.347469] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 [11412.347474] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 = 5 [11412.347480] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 [11412.347484] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 = 68 [11412.347491] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 [11412.347496] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 = 7 [11412.347512] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 [11412.347517] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 = 230 [11412.347524] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 [11412.347528] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 = 50 [11412.347535] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 [11412.347541] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 = 5801 [11412.347557] xen-pciback: 0000:09:08.0: read 2 bytes at 0x52 [11412.347564] xen-pciback: 0000:09:08.0: read 2 bytes at 0x52 = 602 [11412.347589] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 [11412.347594] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 = 230 [11412.347601] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 [11412.347606] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 = 50 [11412.347613] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 [11412.347620] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 = 5801 [11412.347626] xen-pciback: 0000:09:08.0: read 1 bytes at 0x51 [11412.347633] xen-pciback: 0000:09:08.0: read 1 bytes at 0x51 = 58 [11412.347648] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 [11412.347654] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 = 5 [11412.347660] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 [11412.347665] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 = 68 [11412.347671] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 [11412.347676] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 = 7 [11412.347682] xen-pciback: 0000:09:08.0: read 1 bytes at 0x69 [11412.347687] xen-pciback: 0000:09:08.0: read 1 bytes at 0x69 = 0 [11412.350715] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 [11412.350722] xen-pciback: 0000:09:08.0: read 2 bytes at 0x6 = 230 [11412.350738] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 [11412.350744] xen-pciback: 0000:09:08.0: read 1 bytes at 0x34 = 50 [11412.350750] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 [11412.350757] xen-pciback: 0000:09:08.0: read 1 bytes at 0x50 = 5801 [11412.350764] xen-pciback: 0000:09:08.0: read 1 bytes at 0x51 [11412.350780] xen-pciback: 0000:09:08.0: read 1 bytes at 0x51 = 58 [11412.350786] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 [11412.350791] xen-pciback: 0000:09:08.0: read 1 bytes at 0x58 = 5 [11412.350798] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 [11412.350803] xen-pciback: 0000:09:08.0: read 1 bytes at 0x59 = 68 [11412.350814] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 [11412.350819] xen-pciback: 0000:09:08.0: read 1 bytes at 0x68 = 7 [11412.350825] xen-pciback: 0000:09:08.0: read 1 bytes at 0x69 [11412.350830] xen-pciback: 0000:09:08.0: read 1 bytes at 0x69 = 0 [11412.350897] xen-pciback: 0000:09:08.0: read 2 bytes at 0x54 [11412.350905] xen-pciback: 0000:09:08.0: read 2 bytes at 0x54 = 0 [11412.350942] xen-pciback: 0000:09:08.0: read 2 bytes at 0x54 [11412.350950] xen-pciback: 0000:09:08.0: read 2 bytes at 0x54 = 0 [11412.350957] xen-pciback: 0000:09:08.0: read 2 bytes at 0x4 [11412.350980] xen-pciback: 0000:09:08.0: read 2 bytes at 0x4 = 0 [12512.289985] xen-pciback: 0000:09:08.0: read 4 bytes at 0x0 [12512.290003] xen-pciback: 0000:09:08.0: read 4 bytes at 0x0 = 301000 [12512.290012] xen-pciback: 0000:09:08.0: read 4 bytes at 0x4 [12512.290020] xen-pciback: 0000:09:08.0: read 4 bytes at 0x4 = 2300000 [12512.290027] xen-pciback: 0000:09:08.0: read 4 bytes at 0x8 [12512.290032] xen-pciback: 0000:09:08.0: read 4 bytes at 0x8 = 10000c1 [12512.290039] xen-pciback: 0000:09:08.0: read 4 bytes at 0xc [12512.290048] xen-pciback: 0000:09:08.0: read 4 bytes at 0xc = 4810 [12512.290054] xen-pciback: 0000:09:08.0: read 4 bytes at 0x10 [12512.290060] xen-pciback: 0000:09:08.0: read 4 bytes at 0x10 = 5001 [12512.290066] xen-pciback: 0000:09:08.0: read 4 bytes at 0x14 [12512.290071] xen-pciback: 0000:09:08.0: read 4 bytes at 0x14 = f9e00004 [12512.290078] xen-pciback: 0000:09:08.0: read 4 bytes at 0x18 [12512.290083] xen-pciback: 0000:09:08.0: read 4 bytes at 0x18 = 0 [12512.290090] xen-pciback: 0000:09:08.0: read 4 bytes at 0x1c [12512.290094] xen-pciback: 0000:09:08.0: read 4 bytes at 0x1c = f9e20004 [12512.290109] xen-pciback: 0000:09:08.0: read 4 bytes at 0x20 [12512.290115] xen-pciback: 0000:09:08.0: read 4 bytes at 0x20 = 0 [12512.290121] xen-pciback: 0000:09:08.0: read 4 bytes at 0x24 [12512.290126] xen-pciback: 0000:09:08.0: read 4 bytes at 0x24 = 0 [12512.290133] xen-pciback: 0000:09:08.0: read 4 bytes at 0x28 [12512.290137] xen-pciback: 0000:09:08.0: read 4 bytes at 0x28 = 0 [12512.290144] xen-pciback: 0000:09:08.0: read 4 bytes at 0x2c [12512.290149] xen-pciback: 0000:09:08.0: read 4 bytes at 0x2c = 322a103c [12512.290156] xen-pciback: 0000:09:08.0: read 4 bytes at 0x30 [12512.290160] xen-pciback: 0000:09:08.0: read 4 bytes at 0x30 = e0100000 [12512.290172] xen-pciback: 0000:09:08.0: read 4 bytes at 0x34 [12512.290177] xen-pciback: 0000:09:08.0: read 4 bytes at 0x34 = 50 [12512.290189] xen-pciback: 0000:09:08.0: read 4 bytes at 0x38 [12512.290194] xen-pciback: 0000:09:08.0: read 4 bytes at 0x38 = 0 [12512.290200] xen-pciback: 0000:09:08.0: read 4 bytes at 0x3c [12512.290205] xen-pciback: 0000:09:08.0: read 4 bytes at 0x3c = 6100126 [109531.146220] hrtimer: interrupt took 143513628 ns ** Model information sys_vendor: HP product_name: ProLiant DL385 G2 product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: A09 ** Loaded modules: xt_tcpudp xt_physdev xen_netback xen_blkback xen_pciback ip6table_filter ip6_tables iptable_filter ip_tables xen_gntdev ebtable_nat ebtables xen_evtchn x_tables xenfs xen_privcmd binfmt_misc fuse bridge stp llc dm_round_robin dm_multipath scsi_dh loop joydev microcode psmouse serio_raw amd64_edac_mod edac_mce_amd k8temp edac_core ttm drm_kms_helper drm i2c_algo_bit i2c_piix4 i2c_core ipmi_si processor button hpilo thermal_sys ipmi_msghandler hpwdt shpchp dm_mod nfsd auth_rpcgss nfs_acl nfs dns_resolver fscache lockd sunrpc ext3 mbcache jbd sd_mod crc_t10dif hid_generic usbhid hid sr_mod cdrom hpsa ata_generic evdev bnx2 cciss pcspkr lpfc scsi_transport_fc scsi_tgt pata_serverworks uhci_hcd ohci_hcd ehci_pci ehci_hcd libata scsi_mod usbcore usb_common ** PCI devices: 00:03.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:31fb] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 1000 [size=256] Region 2: Memory at f5ff0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at e0400000 [disabled] [size=128K] Capabilities: <access denied> 00:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:3305] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 46 Region 0: I/O ports at 2800 [size=256] Region 1: Memory at f5fe0000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: hpwdt 00:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:3305] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 45 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at f5fd0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at f5fc0000 (32-bit, non-prefetchable) [size=8K] Region 3: Memory at f5f00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at e0420000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: hpilo 00:04.4 USB controller [0c03]: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller [103c:3300] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company iLO2 [103c:3305] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 45 Region 4: I/O ports at 1800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:04.6 IPMI SMIC interface [0c07]: Hewlett-Packard Company Integrated Lights-Out Standard KCS Interface [103c:3302] (prog-if 01) Subsystem: Hewlett-Packard Company iLO2 [103c:3305] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 46 Region 0: Memory at f5ef0000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ipmi_si 00:05.0 PCI bridge [0604]: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge [1166:0036] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=02, sec-latency=64 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:06.0 Host bridge [0600]: Broadcom BCM5785 [HT1000] Legacy South Bridge [1166:0205] Subsystem: Broadcom Device [1166:0201] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Kernel driver in use: piix4_smbus 00:06.1 IDE interface [0101]: Broadcom BCM5785 [HT1000] IDE [1166:0214] (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:320b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1840 [size=16] Capabilities: <access denied> Kernel driver in use: pata_serverworks 00:06.2 ISA bridge [0601]: Broadcom BCM5785 [HT1000] LPC [1166:0234] Subsystem: Broadcom Device [1166:0230] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:07.0 USB controller [0c03]: Broadcom BCM5785 [HT1000] USB [1166:0223] (rev 01) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:320c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at f5ee0000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1c00 [size=256] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:07.1 USB controller [0c03]: Broadcom BCM5785 [HT1000] USB [1166:0223] (rev 01) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:320c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at f5ed0000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3000 [size=256] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:07.2 USB controller [0c03]: Broadcom BCM5785 [HT1000] USB [1166:0223] (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:320d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at f5ec0000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3400 [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:0f.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0140] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f9c00000-f9cfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:10.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0142] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=0a, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: f9d00000-f9efffff Prefetchable memory behind bridge: 00000000e0100000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0144] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0142] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0d, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: f9f00000-f9ffffff Prefetchable memory behind bridge: 00000000e0200000-00000000e02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:13.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0144] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000e0300000-00000000e03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:0d.0 PCI bridge [0604]: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge [1166:0104] (rev c0) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=01, secondary=02, subordinate=02, sec-latency=64 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 03:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=04, subordinate=04, sec-latency=64 Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000e0300000-00000000e03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11) Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter [103c:7038] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 98 Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=32M] [virtual] Expansion ROM at e0300000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: bnx2 05:00.0 Fibre Channel [0c04]: Emulex Corporation Zephyr LightPulse Fibre Channel Host Adapter [10df:f0e5] (rev 02) Subsystem: Emulex Corporation Zephyr LightPulse Fibre Channel Host Adapter [10df:f0e5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 95 Region 0: Memory at f9cf0000 (64-bit, non-prefetchable) [size=4K] Region 2: Memory at f9ce0000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 4000 [size=256] [virtual] Expansion ROM at e0000000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: lpfc 08:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge [10b5:8114] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at f9df0000 (32-bit, non-prefetchable) [size=8K] Bus: primary=08, secondary=09, subordinate=09, sec-latency=64 I/O behind bridge: 00005000-00005fff Memory behind bridge: f9e00000-f9efffff Prefetchable memory behind bridge: 00000000e0100000-00000000e01fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 09:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev c1) Subsystem: Hewlett-Packard Company Device [103c:322a] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 38 Region 0: I/O ports at 5000 [disabled] [size=256] Region 1: Memory at f9e00000 (64-bit, non-prefetchable) [disabled] [size=128K] Region 3: Memory at f9e20000 (64-bit, non-prefetchable) [disabled] [size=128K] Expansion ROM at e0100000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: pciback 0b:00.0 Fibre Channel [0c04]: Emulex Corporation Zephyr LightPulse Fibre Channel Host Adapter [10df:f0e5] (rev 02) Subsystem: Emulex Corporation Zephyr LightPulse Fibre Channel Host Adapter [10df:f0e5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 96 Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=4K] Region 2: Memory at f9fe0000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 6000 [size=256] [virtual] Expansion ROM at e0200000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: lpfc 40:0f.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0140] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=43, subordinate=45, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:10.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0142] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=46, subordinate=48, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fde00000-fdffffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:11.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0144] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=49, subordinate=49, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:12.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0142] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=41, subordinate=42, sec-latency=0 Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000fc100000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:13.0 PCI bridge [0604]: Broadcom HT2100 PCI-Express Bridge [1166:0144] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=4a, subordinate=4a, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 41:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=41, secondary=42, subordinate=42, sec-latency=64 Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000fc100000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 42:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11) Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter [103c:7038] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 97 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] [virtual] Expansion ROM at fc100000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: bnx2 46:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array Controller [103c:3230] (rev 01) Subsystem: Hewlett-Packard Company P400 SAS Controller [103c:3234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at fdf00000 (64-bit, non-prefetchable) [size=1M] Region 2: I/O ports at 7000 [size=256] Region 3: Memory at fdef0000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fc000000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: cciss ** USB devices: Bus 003 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" Bus 004 Device 002: ID 03f0:1027 Hewlett-Packard Virtual keyboard and mouse Bus 004 Device 003: ID 03f0:1327 Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.1 APT prefers oldstable-updates APT policy: (500, 'oldstable-updates'), (500, 'stable'), (500, 'oldstable') Architecture: amd64 (x86_64) Kernel: Linux 3.9-0.bpo.1-amd64 (SMP w/4 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-0.bpo.1-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.112~bpo70+1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-0.bpo.1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.9-0.bpo.1-amd64 suggests: ii debian-kernel-handbook 1.0.15 ii grub-pc 1.99-27+deb7u1 ii linux-doc-3.9 3.9.8-1 Versions of packages linux-image-3.9-0.bpo.1-amd64 is related to: pn firmware-atheros <none> ii firmware-bnx2 0.36+wheezy.1 pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> ii xen-hypervisor-3.2-1-amd64 [xen-hypervisor] 3.2.1-2 ii xen-hypervisor-4.0-amd64 [xen-hypervisor] 4.0.1-5.11 ii xen-hypervisor-4.1-amd64 [xen-hypervisor] 4.1.4-3+deb7u1 -- debconf information: * linux-image-3.9-0.bpo.1-amd64/postinst/missing-firmware-3.9-0.bpo.1-amd64: linux-image-3.9-0.bpo.1-amd64/postinst/depmod-error-initrd-3.9-0.bpo.1-amd64: false linux-image-3.9-0.bpo.1-amd64/prerm/removing-running-kernel-3.9-0.bpo.1-amd64: true linux-image-3.9-0.bpo.1-amd64/postinst/ignoring-ramdisk: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130719172410.2108.64613.report...@srv01.cab.unipd.it
