--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-15
Severity: normal
Starting a VE on openvz, with "vzctl start" on ext4 does a kernel oops.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-openvz-686 (Debian 2.6.32-15)
(b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue
Jun 1 06:52:26 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-686
root=/dev/mapper/rootvg-root_lv ro rootdelay=10 quiet
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[ 42.176694] IRQ 15/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
[ 42.176708] Using irq 15
[ 42.228769] IPMI BT: req2rsp=10 secs retries=3
[ 42.234466] ipmi: Found new BMC (man_id: 0x0002a2, prod_id:
0x0002, dev_id: 0x00)
[ 42.234496] IPMI bt interface initialized
[ 42.337613] ipmi device interface
[ 42.635055] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 48.996009] ib0: no IPv6 routers present
[ 52.276011] eth0: no IPv6 routers present
[ 52.824009] venet0: no IPv6 routers present
[ 94.755455] ib0: enabling connected mode will cause multicast packet drops
[ 94.755510] ib1: enabling connected mode will cause multicast packet drops
[ 94.756944] ib0: mtu > 2044 will cause multicast packet drops.
[ 94.758961] ib1: mtu > 2044 will cause multicast packet drops.
[ 290.679212] warning: `vzctl' uses 32-bit capabilities (legacy support in use)
[ 290.741517] CT: 100: started
[ 290.777927] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 290.778102] IP: [<(null)>] (null)
[ 290.778208] *pdpt = 000000003654c001 *pde = 0000000000000000
[ 290.778360] Oops: 0000 [#1] SMP
[ 290.778504] last sysfs file:
/sys/devices/pci0000:15/0000:15:01.0/0000:16:00.0/net/ib1/mode
[ 290.778592] Modules linked in: vzethdev vznetdev simfs vzrst vzcpt
vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter
ip6_tables xt_tcpudp xt_length xt_hl xt_tcpmss xt_TCPMSS
iptable_mangle iptable_filter ipmi_devintf xt_multiport xt_limit
ipmi_si xt_dscp ipt_REJECT ipmi_msghandler ip_tables x_tables
cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave
nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss ext4 jbd2 crc16
p4_clockmod speedstep_lib dell_rbu xprtrdma svcrdma sunrpc ib_srp
scsi_transport_srp scsi_tgt ib_ipoib ib_umad rdma_ucm rdma_cm ib_cm
iw_cm ib_sa ib_addr ib_uverbs loop snd_pcsp ib_mthca snd_pcm ib_mad
snd_timer tpm_tis tpm snd i2c_piix4 ib_core tpm_bios i2c_core
soundcore dcdbas evdev shpchp pci_hotplug snd_page_alloc button
processor ext3 jbd mbcache dm_mod sr_mod cdrom ata_generic sg sd_mod
crc_t10dif pata_serverworks libata ohci_hcd aic7xxx megaraid_mbox
qla1280 megaraid_mm tg3 ehci_hcd libphy scsi_transport_spi floppy
usbcore nls_base thermal scsi_mod thermal_sys [last unloaded:
scsi_wait_scan]
[ 290.781812]
[ 290.781812] Pid: 2260, comm: vzctl Not tainted (2.6.32-5-openvz-686
#1) belyayev PowerEdge 6600 )
[ 290.781812] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 2
[ 290.781812] EIP is at 0x0
[ 290.781812] EAX: ef6147f0 EBX: f88b8fd4 ECX: 00000000 EDX: 00003000
[ 290.781812] ESI: ef6147f0 EDI: 00000003 EBP: 00000000 ESP: f64e3cd8
[ 290.781812] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 290.781812] Process vzctl (pid: 2260, veid: 100, ti=f64e2000
task=f65756a0 task.ti=f64e2000)
[ 290.781812] Stack:
[ 290.781812] fed7ff6a 00000000 00000000 ffff0000 ffffffff 00003000
00000000 00000002
[ 290.781812] <0> f69d7000 ef6149b8 ef614768 00000000 00000000
f64e3d48 cad73684 00000000
[ 290.781812] <0> c10db809 f6ec8240 00000001 f6e740c0 00000000
ef6147f0 00001000 00000000
[ 290.781812] Call Trace:
[ 290.781812] [<fed7ff6a>] ? ext4_da_get_block_prep+0x15c/0x281 [ext4]
[ 290.781812] [<c10db809>] ? __block_prepare_write+0x140/0x297
[ 290.781812] [<c10dbab3>] ? block_write_begin+0x70/0xc6
[ 290.781812] [<fed7fe0e>] ? ext4_da_get_block_prep+0x0/0x281 [ext4]
[ 290.781812] [<fed82ab6>] ? ext4_da_write_begin+0x1f3/0x277 [ext4]
[ 290.781812] [<fed7fe0e>] ? ext4_da_get_block_prep+0x0/0x281 [ext4]
[ 290.781812] [<c10918ae>] ? generic_file_buffered_write+0xd0/0x21d
[ 290.781812] [<c1091df8>] ? __generic_file_aio_write+0x265/0x28d
[ 290.781812] [<f88b36b5>] ? vzquota_qlnk_destroy+0xe/0xa4 [vzdquota]
[ 290.781812] [<f88b3f6d>] ? vzquota_inode_data+0xe3/0xfc [vzdquota]
[ 290.781812] [<c1091e71>] ? generic_file_aio_write+0x51/0x93
[ 290.781812] [<c10bedc6>] ? do_sync_write+0xc0/0x107
[ 290.781812] [<c104c376>] ? autoremove_wake_function+0x0/0x2d
[ 290.781812] [<c10bd579>] ? fd_install+0x1e/0x3c
[ 290.781812] [<c10bed06>] ? do_sync_write+0x0/0x107
[ 290.781812] [<c10bf767>] ? vfs_write+0x7e/0xd6
[ 290.781812] [<c10bf8a1>] ? sys_write+0x40/0xa9
[ 290.781812] [<c1008120>] ? syscall_call+0x7/0xb
[ 290.781812] Code: Bad EIP value.
[ 290.781812] EIP: [<00000000>] 0x0 SS:ESP 0068:f64e3cd8
[ 290.781812] CR2: 0000000000000000
[ 290.787373] ---[ end trace 64f0f49746fe4c61 ]---
[ 291.064729] CT: 100: stopped
[ 291.806231] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 291.806392] IP: [<(null)>] (null)
[ 291.806498] *pdpt = 000000003679f001 *pde = 0000000000000000
[ 291.806651] Oops: 0000 [#2] SMP
[ 291.806796] last sysfs file:
/sys/devices/pci0000:15/0000:15:01.0/0000:16:00.0/net/ib1/mode
[ 291.806885] Modules linked in: vzethdev vznetdev simfs vzrst vzcpt
vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter
ip6_tables xt_tcpudp xt_length xt_hl xt_tcpmss xt_TCPMSS
iptable_mangle iptable_filter ipmi_devintf xt_multiport xt_limit
ipmi_si xt_dscp ipt_REJECT ipmi_msghandler ip_tables x_tables
cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave
nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss ext4 jbd2 crc16
p4_clockmod speedstep_lib dell_rbu xprtrdma svcrdma sunrpc ib_srp
scsi_transport_srp scsi_tgt ib_ipoib ib_umad rdma_ucm rdma_cm ib_cm
iw_cm ib_sa ib_addr ib_uverbs loop snd_pcsp ib_mthca snd_pcm ib_mad
snd_timer tpm_tis tpm snd i2c_piix4 ib_core tpm_bios i2c_core
soundcore dcdbas evdev shpchp pci_hotplug snd_page_alloc button
processor ext3 jbd mbcache dm_mod sr_mod cdrom ata_generic sg sd_mod
crc_t10dif pata_serverworks libata ohci_hcd aic7xxx megaraid_mbox
qla1280 megaraid_mm tg3 ehci_hcd libphy scsi_transport_spi floppy
usbcore nls_base thermal scsi_mod thermal_sys [last unloaded:
scsi_wait_scan]
[ 291.810049]
[ 291.810049] Pid: 2256, comm: vzctl Tainted: G D
(2.6.32-5-openvz-686 #1) belyayev PowerEdge 6600 )
[ 291.810049] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 291.810049] EIP is at 0x0
[ 291.810049] EAX: ef4c4088 EBX: f88b8fd4 ECX: 00000000 EDX: 00003000
[ 291.810049] ESI: ef4c4088 EDI: 00000000 EBP: ef4c4000 ESP: f0527e58
[ 291.810049] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 291.810049] Process vzctl (pid: 2256, veid: 0, ti=f0526000
task=f6a22b50 task.ti=f0526000)
[ 291.810049] Stack:
[ 291.810049] fed7eb5a ef4c4088 00000001 fed7ecad ef4c4250 00000000
cad97abc f69d7000
[ 291.810049] <0> 00000003 00000000 fed7eb6f ef4c4138 00000000
00000000 c1097c02 cad97abc
[ 291.810049] <0> c109807f cad97abc 00000000 c1098151 f6ee4000
00000000 00000000 00000000
[ 291.810049] Call Trace:
[ 291.810049] [<fed7eb5a>] ? vfs_dq_release_reservation_block+0x44/0x59 [ext4]
[ 291.810049] [<fed7ecad>] ? ext4_da_invalidatepage+0x13e/0x152 [ext4]
[ 291.810049] [<fed7eb6f>] ? ext4_da_invalidatepage+0x0/0x152 [ext4]
[ 291.810049] [<c1097c02>] ? do_invalidatepage+0x16/0x18
[ 291.810049] [<c109807f>] ? truncate_inode_page+0x47/0x80
[ 291.810049] [<c1098151>] ? truncate_inode_pages_range+0x99/0x23f
[ 291.810049] [<c10e3463>] ? fsnotify_clear_marks_by_inode+0x17/0x9e
[ 291.810049] [<f88b3ec5>] ? vzquota_inode_data+0x3b/0xfc [vzdquota]
[ 291.810049] [<fed82b3a>] ? ext4_delete_inode+0x0/0x21e [ext4]
[ 291.810049] [<c1098300>] ? truncate_inode_pages+0x9/0xc
[ 291.810049] [<fed82b8d>] ? ext4_delete_inode+0x53/0x21e [ext4]
[ 291.810049] [<fed82b3a>] ? ext4_delete_inode+0x0/0x21e [ext4]
[ 291.810049] [<c10cedc5>] ? generic_delete_inode+0xb3/0x12e
[ 291.810049] [<c10cdf16>] ? iput+0x48/0x4a
[ 291.810049] [<c10c83a7>] ? do_unlinkat+0xbe/0xfc
[ 291.810049] [<c1021b83>] ? do_page_fault+0x271/0x287
[ 291.810049] [<c1008120>] ? syscall_call+0x7/0xb
[ 291.810049] Code: Bad EIP value.
[ 291.810049] EIP: [<00000000>] 0x0 SS:ESP 0068:f0527e58
[ 291.810049] CR2: 0000000000000000
[ 291.815596] ---[ end trace 64f0f49746fe4c62 ]---
[ 564.459374] atkbd.c: Unknown key pressed (translated set 2, code
0x0 on isa0060/serio0).
[ 564.459469] atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
** Model information
not available
** Loaded modules:
Module Size Used by
vzethdev 5593 0
vznetdev 11601 0
simfs 2535 0
vzrst 108798 0
vzcpt 93505 0
vzdquota 30157 0 [permanent]
vzmon 12941 4 vzethdev,vznetdev,vzrst,vzcpt
vzdev 1284 4 vzethdev,vznetdev,vzdquota,vzmon
ip6t_REJECT 2152 0
ip6table_mangle 2619 0
ip6table_filter 1968 0
ip6_tables 8664 2 ip6table_mangle,ip6table_filter
xt_tcpudp 1743 0
xt_length 796 0
xt_hl 925 0
xt_tcpmss 1017 0
xt_TCPMSS 2315 0
iptable_mangle 2377 0
iptable_filter 1842 0
ipmi_devintf 4033 2
xt_multiport 1775 0
xt_limit 1088 0
ipmi_si 26752 1
xt_dscp 1261 0
ipt_REJECT 1521 0
ipmi_msghandler 22871 2 ipmi_devintf,ipmi_si
ip_tables 7826 2 iptable_mangle,iptable_filter
x_tables 8651 12
ip6t_REJECT,ip6_tables,xt_tcpudp,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
nfsd 194367 13
exportfs 2758 1 nfsd
nfs 209474 0
lockd 50434 2 nfsd,nfs
fscache 24678 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25244 2 nfsd,nfs
ext4 254973 1
jbd2 56091 1 ext4
crc16 1027 1 ext4
p4_clockmod 2444 4
speedstep_lib 2468 1 p4_clockmod
dell_rbu 3727 0
xprtrdma 28019 0
svcrdma 23678 1
sunrpc 137252 14
nfsd,nfs,lockd,nfs_acl,auth_rpcgss,xprtrdma,svcrdma
ib_srp 17772 0
scsi_transport_srp 2794 1 ib_srp
scsi_tgt 6846 1 scsi_transport_srp
ib_ipoib 51317 0
ib_umad 7440 0
rdma_ucm 7381 0
rdma_cm 17850 3 xprtrdma,svcrdma,rdma_ucm
ib_cm 22573 3 ib_srp,ib_ipoib,rdma_cm
iw_cm 5123 1 rdma_cm
ib_sa 13155 4 ib_srp,ib_ipoib,rdma_cm,ib_cm
ib_addr 4257 1 rdma_cm
ib_uverbs 21406 1 rdma_ucm
loop 9761 0
snd_pcsp 5219 0
ib_mthca 101048 0
snd_pcm 47378 1 snd_pcsp
ib_mad 26369 4 ib_umad,ib_cm,ib_sa,ib_mthca
snd_timer 12262 1 snd_pcm
tpm_tis 5576 0
tpm 8137 1 tpm_tis
snd 34379 3 snd_pcsp,snd_pcm,snd_timer
i2c_piix4 7124 0
ib_core 33231 13
xprtrdma,svcrdma,ib_srp,ib_ipoib,ib_umad,rdma_ucm,rdma_cm,ib_cm,iw_cm,ib_sa,ib_uverbs,ib_mthca,ib_mad
tpm_bios 3577 1 tpm
i2c_core 12696 1 i2c_piix4
soundcore 3454 1 snd
dcdbas 3940 0
evdev 5613 2
shpchp 21264 0
pci_hotplug 18069 1 shpchp
snd_page_alloc 5121 1 snd_pcm
button 3606 0
processor 26627 0
ext3 94148 2
jbd 32185 1 ext3
mbcache 3762 2 ext4,ext3
dm_mod 46106 12
sr_mod 10826 0
cdrom 26487 1 sr_mod
ata_generic 2019 0
sg 15980 0
sd_mod 25873 3
crc_t10dif 1012 1 sd_mod
pata_serverworks 3969 0
libata 115997 2 ata_generic,pata_serverworks
ohci_hcd 17076 0
aic7xxx 95555 0
megaraid_mbox 21026 2
qla1280 16957 0
megaraid_mm 5455 1 megaraid_mbox
tg3 88621 0
ehci_hcd 28191 0
libphy 11642 1 tg3
scsi_transport_spi 14870 1 aic7xxx
floppy 40931 0
usbcore 98842 3 ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal 9226 0
scsi_mod 101441 11
ib_srp,scsi_transport_srp,scsi_tgt,sr_mod,sg,sd_mod,libata,aic7xxx,megaraid_mbox,qla1280,scsi_transport_spi
thermal_sys 9378 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] (rev 22)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.1 Host bridge [0600]: Broadcom CMIC-HE [1166:0011]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 Host bridge [0600]: Broadcom CMIC-HE [1166:0011]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 Host bridge [0600]: Broadcom CMIC-HE [1166:0011]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.0 SCSI storage controller [0100]: Adaptec AIC-7892P U160/m
[9005:008f] (rev 02)
Subsystem: Dell Device [1028:0109]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
BIST result: 00
Region 0: I/O ports at ec00 [disabled] [size=256]
Region 1: Memory at fe103000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aic7xxx
00:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at fe102000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Class [ff00]: Dell Remote Access Card III [1028:0007]
Subsystem: Dell Remote Access Card III [1028:0007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at e4f8 [size=8]
Region 2: I/O ports at e4e8 [size=8]
Expansion ROM at d0020000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:05.1 Class [ff00]: Dell Remote Access Card III [1028:0008]
Subsystem: Dell Remote Access Card III [1028:0008]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 31
Region 0: Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e480 [size=64]
Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial
00:05.2 Class [ff00]: Dell Remote Access Card III: BMC/SMIC device not
present [1028:0009]
Subsystem: Dell Remote Access Card III: BMC/SMIC device not
present [1028:0009]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at e4f4 [size=4]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
Subsystem: Broadcom CSB5 South Bridge [1166:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212]
(rev 93) (prog-if 82 [Master PriP])
Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 08b0 [size=16]
Kernel driver in use: pata_serverworks
00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller
[1166:0220] (rev 05) (prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
Subsystem: Broadcom Dell PowerEdge 1650/1750 [1166:0230]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:10.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:10.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:11.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:11.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:12.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:12.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
03:01.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge
[8086:b154] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=03, secondary=04, subordinate=05, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fcd00000-fcffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
04:00.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge
[8086:b154] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fcf00000-fcffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
04:01.0 SCSI storage controller [0100]: QLogic Corp. ISP12160 Dual
Channel Ultra3 SCSI Processor [1077:1216] (rev 06)
Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID [101e:8493]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at fcdff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
05:00.0 RAID bus controller [0104]: American Megatrends Inc. MegaRAID
[101e:1960] (rev 20)
Subsystem: Dell PowerEdge RAID Controller 3/DC [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fcf00000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: megaraid
0a:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5700 Gigabit Ethernet [14e4:1644] (rev 14)
Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at eff10000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95700A6
[EC] Engineering changes: 107070-16
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 26 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 23411fb005c7a768 Data: c4c3
Kernel driver in use: tg3
0a:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5700 Gigabit Ethernet [14e4:1644] (rev 14)
Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at eff00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95700A6
[EC] Engineering changes: 107070-16
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 26 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 85101f90203ac410 Data: a624
Kernel driver in use: tg3
15:01.0 PCI bridge [0604]: Mellanox Technologies MT23108 PCI Bridge
[15b3:5a46] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=15, secondary=16, subordinate=16, sec-latency=64
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ed200000-ed3fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=15:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=512 CommitmentLimit=512
Downstream: Capacity=128 CommitmentLimit=128
16:00.0 InfiniBand [0c06]: Mellanox Technologies MT23108 InfiniHost
[15b3:5a44] (rev a1)
Subsystem: Mellanox Technologies MT23108 InfiniHost [15b3:5a44]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at ed200000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e7800000 (64-bit, prefetchable) [size=8M]
Region 4: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Capabilities: [40] MSI-X: Enable+ Count=32 Masked-
Vector table: BAR=0 offset=00082000
PBA: BAR=0 offset=00082200
Capabilities: [50] Vital Product Data
Product Name: Cougar cub
Read-only fields:
[PN] Part number: 99-00025-01
[EC] Engineering changes: Rev: C04
[SN] Serial number: TS0451F00669
[V0] Vendor specific: PW=12W;PCI 66MHZ;PCI-X 133MHZ
[V2] Vendor specific: 0451
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific: N/A
[YA] Asset tag: N/A
[RW] Read-write area: 94 byte(s) free
End
Capabilities: [60] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] PCI-X non-bridge device
Command: DPERE- ERO- RBC=4096 OST=2
Status: Dev=16:00.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=4096 DMOST=2 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: ib_mthca
1b:01.0 PCI bridge [0604]: Mellanox Technologies MT23108 PCI Bridge
[15b3:5a46] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=1b, secondary=1c, subordinate=1c, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d7e00000-d7ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=1b:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=512 CommitmentLimit=512
Downstream: Capacity=128 CommitmentLimit=128
1c:00.0 InfiniBand [0c06]: Mellanox Technologies MT23108 InfiniHost
[15b3:5a44] (rev a1)
Subsystem: Mellanox Technologies MT23108 InfiniHost [15b3:5a44]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d7e00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at cf800000 (64-bit, prefetchable) [size=8M]
Region 4: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Capabilities: [40] MSI-X: Enable+ Count=32 Masked-
Vector table: BAR=0 offset=00082000
PBA: BAR=0 offset=00082200
Capabilities: [50] Vital Product Data
Product Name: Cougar cub
Read-only fields:
[PN] Part number: 99-00025-01
[EC] Engineering changes: Rev: C03
[SN] Serial number: TS0443F00824
[V0] Vendor specific: PW=12W;PCI 66MHZ;PCI-X 133MHZ
[V2] Vendor specific: 0443
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific: N/A
[YA] Asset tag: N/A
[RW] Read-write area: 94 byte(s) free
End
Capabilities: [60] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] PCI-X non-bridge device
Command: DPERE- ERO- RBC=4096 OST=2
Status: Dev=1c:00.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=4096 DMOST=2 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: ib_mthca
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-openvz-686 (SMP w/8 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-openvz-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
ii vzctl 3.0.23-17 server virtualization solution - c
Versions of packages linux-image-2.6.32-5-openvz-686 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
ii libc6-i686 2.11.1-3 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-openvz-686 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-openvz-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.24 Binary firmware for various driver
ii firmware-linux-nonfree 0.24 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-openvz-686/postinst/missing-firmware-2.6.32-5-openvz-686:
linux-image-2.6.32-5-openvz-686/postinst/bootloader-error-2.6.32-5-openvz-686:
linux-image-2.6.32-5-openvz-686/prerm/would-invalidate-boot-loader-2.6.32-5-openvz-686:
true
linux-image-2.6.32-5-openvz-686/postinst/bootloader-test-error-2.6.32-5-openvz-686:
linux-image-2.6.32-5-openvz-686/postinst/depmod-error-initrd-2.6.32-5-openvz-686:
false
linux-image-2.6.32-5-openvz-686/prerm/removing-running-kernel-2.6.32-5-openvz-686:
true
--- End Message ---
