Your message dated Mon, 8 Jul 2013 19:40:05 +0200
with message-id <20130708174005.GA7214@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #592487,
regarding linux-image-2.6.32-5-xen-686: dom0 under virtualbox: APIC write
causes WARNING
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
592487: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=592487
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-18
Severity: normal
[ 0.004000] ------------[ cut here ]------------
[ 0.004000] WARNING: at
/build/buildd-linux-2.6_2.6.32-18-i386-HNrmOz/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten.c:731
perf_events_lapic_init+0x28/0x29()
[ 0.004000] Hardware name: VirtualBox
[ 0.004000] Modules linked in:
[ 0.004000] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-686 #1
[ 0.004000] Call Trace:
[ 0.004000] [<c10370a5>] ? warn_slowpath_common+0x5e/0x8a
[ 0.004000] [<c10370db>] ? warn_slowpath_null+0xa/0xc
[ 0.004000] [<c1011bb0>] ? perf_events_lapic_init+0x28/0x29
[ 0.004000] [<c140307d>] ? init_hw_perf_events+0x2dd/0x376
[ 0.004000] [<c1402cd0>] ? check_bugs+0x8/0xd8
[ 0.004000] [<c13fb7fe>] ? start_kernel+0x309/0x31d
[ 0.004000] [<c13fd3c3>] ? xen_start_kernel+0x615/0x61c
[ 0.004000] [<c1409045>] ? print_local_APIC+0x61/0x380
[ 0.004000] ---[ end trace a7919e7f17c0a725 ]---
-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-686 (Debian 2.6.32-18) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 07:00:17 UTC 2010
** Command line:
root=UUID=e4c2a533-6ef3-44dc-a990-7008664951a3 ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 3.318557] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0
PQ: 0 ANSI: 5
[ 3.384604] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 3.408181] sd 0:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4
GB/20.0 GiB)
[ 3.408335] sd 0:0:0:0: [sda] Write Protect is off
[ 3.408341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.408406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.408750] sda: sda1 sda2 <sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 3.426157] Uniform CD-ROM driver Revision: 3.20
[ 3.426952] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.448355] sda5 >
[ 3.450546] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.587924] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.593307] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.669180] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 3.669198] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3.669207] usb 2-1: Product: USB Tablet
[ 3.669215] usb 2-1: Manufacturer: VirtualBox
[ 3.669449] usb 2-1: configuration #1 chosen from 1 choice
[ 3.749855] usbcore: registered new interface driver hiddev
[ 3.766284] input: VirtualBox USB Tablet as
/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input1
[ 3.766426] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10
Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 3.766510] usbcore: registered new interface driver usbhid
[ 3.766517] usbhid: v2.6:USB HID core driver
[ 4.345200] PM: Starting manual resume from disk
[ 4.345226] PM: Resume from partition 8:5
[ 4.345248] PM: Checking hibernation image.
[ 4.349417] PM: Error -22 checking image file
[ 4.349424] PM: Resume from disk failed.
[ 4.478484] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.237035] udev: starting version 158
[ 7.824810] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 8.103234] piix4_smbus 0000:00:07.0: SMBus base address uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 8.162426] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.162533] ACPI: Power Button [PWRF]
[ 8.162681] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
[ 8.162723] ACPI: Sleep Button [SLPF]
[ 8.194624] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 8.378664] ACPI: AC Adapter [AC] (on-line)
[ 8.638724] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.267065] xen: registering gsi 21 triggering 0 polarity 1
[ 9.267124] xen_allocate_pirq: returning irq 21 for gsi 21
[ 9.267169] xen: --> irq=21
[ 9.267228] Already setup the GSI :21
[ 9.267268] Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 9.267513] Intel ICH 0000:00:05.0: setting latency timer to 64
[ 9.309777] parport_pc 00:04: reported by Plug and Play ACPI
[ 10.169086] intel8x0_measure_ac97_clock: measured 180996 usecs (15636
samples)
[ 10.169102] intel8x0: measured clock 86388 rejected
[ 10.528351] intel8x0_measure_ac97_clock: measured 55861 usecs (7680 samples)
[ 10.528534] intel8x0: measured clock 137484 rejected
[ 10.890173] intel8x0_measure_ac97_clock: measured 57725 usecs (7680 samples)
[ 10.890180] intel8x0: measured clock 133044 rejected
[ 10.890186] intel8x0: clocking to 48000
[ 11.953866] Adding 915664k swap on /dev/sda5. Priority:-1 extents:1
across:915664k
[ 12.873884] loop: module loaded
[ 16.514618] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.519687] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
[ 16.520758] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.067571] Event-channel device installed.
[ 19.683566] XENBUS: Unable to read cpu state
[ 22.743237] Bridge firewalling registered
[ 27.368132] eth0: no IPv6 routers present
[ 308.858296] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 308.861086] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
[ 308.862187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 319.496161] eth0: no IPv6 routers present
[ 987.454100] e1000: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
[ 987.455342] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 987.456198] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 987.541792] device peth0 entered promiscuous mode
[ 987.659447] eth0: port 1(peth0) entering forwarding state
[ 997.544749] peth0: no IPv6 routers present
[ 997.952194] eth0: no IPv6 routers present
[ 1157.090246] kjournald starting. Commit interval 5 seconds
[ 1157.090414] EXT3 FS on loop0, internal journal
[ 1157.090427] EXT3-fs: mounted filesystem with ordered data mode.
[ 1776.613473] device vif1.0 entered promiscuous mode
[ 1776.695398] eth0: port 2(vif1.0) entering forwarding state
[ 1777.149095] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1778.185144] nf_conntrack version 0.5.0 (5862 buckets, 23448 max)
[ 1778.187459] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 1778.187477] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 1778.187483] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 1778.338441] physdev match: using --physdev-out in the OUTPUT, FORWARD and
POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1781.433561] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[ 1781.469050] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_32-abi)
[ 1786.813580] vif1.0: no IPv6 routers present
[ 1841.293272] eth0: port 2(vif1.0) entering disabled state
[ 1841.293451] eth0: port 2(vif1.0) entering disabled state
[ 1844.912013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1857.655734] kjournald starting. Commit interval 5 seconds
[ 1857.655801] EXT3 FS on loop0, internal journal
[ 1857.655808] EXT3-fs: recovery complete.
[ 1857.655834] EXT3-fs: mounted filesystem with ordered data mode.
[ 1889.388906] device vif2.0 entered promiscuous mode
[ 1889.456007] eth0: port 2(vif2.0) entering forwarding state
[ 1890.200021] physdev match: using --physdev-out in the OUTPUT, FORWARD and
POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1894.096451] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[ 1894.159136] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[ 1899.471204] vif2.0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
nf_conntrack_ipv4 7597 1
nf_defrag_ipv4 779 1 nf_conntrack_ipv4
xt_state 927 1
nf_conntrack 38071 2 nf_conntrack_ipv4,xt_state
xt_physdev 1228 2
iptable_filter 1790 1
ip_tables 7690 1 iptable_filter
x_tables 8327 3 xt_state,xt_physdev,ip_tables
ext3 94196 0
jbd 32161 1 ext3
bridge 32983 0
stp 996 1 bridge
xen_evtchn 3411 2
xenfs 7224 1
loop 9753 4
parport_pc 15871 0
snd_intel8x0 19523 0
parport 22554 1 parport_pc
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
processor 30973 0
ac 1640 0
joydev 6771 0
acpi_processor 3635 1 processor,[permanent]
snd_pcm 47402 2 snd_intel8x0,snd_ac97_codec
snd_timer 12258 1 snd_pcm
i2c_piix4 7124 0
button 3598 0
psmouse 44653 0
evdev 5609 3
pcspkr 1207 0
snd 34363 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
serio_raw 2916 0
i2c_core 12696 1 i2c_piix4
soundcore 3450 1 snd
snd_page_alloc 5109 2 snd_intel8x0,snd_pcm
ext4 254973 1
mbcache 3762 2 ext3,ext4
jbd2 56059 1 ext4
crc16 1027 1 ext4
usbhid 28024 0
hid 50641 1 usbhid
sg 15976 0
sr_mod 10770 0
sd_mod 25865 3
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2019 0
ata_piix 17696 0
ahci 27262 2
ohci_hcd 17068 0
thermal 9206 0
ehci_hcd 28255 0
libata 116021 3 ata_generic,ata_piix,ahci
thermal_sys 9378 2 processor,thermal
usbcore 98742 4 usbhid,ohci_hcd,ehci_hcd
e1000 77749 0
nls_base 4541 1 usbcore
scsi_mod 101397 4 sg,sr_mod,sd_mod,libata
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.2.120
netmask 255.255.255.0
gateway 192.168.2.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 08:00:27:ec:55:af brd ff:ff:ff:ff:ff:ff
inet6 fe80::a00:27ff:feec:55af/64 scope link
valid_lft forever preferred_lft forever
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 08:00:27:ec:55:af brd ff:ff:ff:ff:ff:ff
inet 192.168.2.120/24 brd 192.168.2.255 scope global eth0
inet6 fe80::a00:27ff:feec:55af/64 scope link
valid_lft forever preferred_lft forever
5: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
peth0:155922592 176556 0 0 0 0 0 1406 3018785
40163 0 0 0 0 0 0
eth0:109720090 83282 0 0 0 0 0 1637 2906933
39491 0 0 0 0 0 0
vif2.0: 7292 54 0 0 0 0 0 0 105871
1041 0 8 0 0 0 0
*** Protocol statistics:
Ip:
82585 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
82420 incoming packets delivered
40013 requests sent out
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 1
Tcp:
132 active connections openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
1 connections established
82107 segments received
39745 segments send out
3 segments retransmited
0 bad segments received.
6 resets sent
Udp:
267 packets received
0 packets to unknown port received.
0 packet receive errors
265 packets sent
UdpLite:
TcpExt:
129 TCP sockets finished time wait in fast timer
31 delayed acks sent
18 packets directly queued to recvmsg prequeue.
514917 bytes directly in process context from backlog
24121 bytes directly received in process context from prequeue
78134 packet headers predicted
404 packets header predicted and directly queued to user
933 acknowledgments not containing data payload received
38 predicted acknowledgments
2 retransmits in slow start
1 other TCP timeouts
1 DSACKs received
TCPDSACKIgnoredOld: 1
TCPSackShiftFallback: 1
IpExt:
InBcastPkts: 47
InOctets: 110006489
OutOctets: 2444099
InBcastOctets: 10018
*** Device features:
eth0: 0x11829
lo: 0x13865
peth0: 0x10ba9
vif2.0: 0x10803
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma]
[8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton
II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH
VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet
Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d010 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: e1000
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest
Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97
Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d100 [size=256]
Region 1: I/O ports at d200 [size=64]
Kernel driver in use: Intel ICH
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 9
00:0b.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci_hcd
00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d240 [size=8]
Region 1: I/O ports at <ignored>
Region 2: I/O ports at d250 [size=8]
Region 3: I/O ports at <ignored>
Region 4: I/O ports at d260 [size=16]
Region 5: Memory at f0806000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: ahci
** USB devices:
Bus 002 Device 002: ID 80ee:0021
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-xen-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-xen-686 depends on:
ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy
ii initramfs-tools 0.97.2 tools for generating an initramfs
ii linux-base 2.6.32-18 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-xen-686 recommends:
ii firmware-linux-free 2.6.32-18 Binary firmware for various driver
ii libc6-xen 2.11.2-2 GNU C Library: Shared libraries [X
Versions of packages linux-image-2.6.32-5-xen-686 suggests:
pn grub <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-xen-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-4.0-i386 [xen 4.0.1~rc3-1 The Xen Hypervisor on i386
-- debconf information:
linux-image-2.6.32-5-xen-686/postinst/depmod-error-initrd-2.6.32-5-xen-686:
false
linux-image-2.6.32-5-xen-686/postinst/ignoring-do-bootloader-2.6.32-5-xen-686:
linux-image-2.6.32-5-xen-686/prerm/removing-running-kernel-2.6.32-5-xen-686:
true
linux-image-2.6.32-5-xen-686/postinst/missing-firmware-2.6.32-5-xen-686:
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
