Your message dated Tue, 2 Jul 2013 22:28:33 +0200
with message-id <20130702202833.GC4762@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #546147,
regarding linux-image-2.6.26-2-686: System unstable after hung task with IO
operations on a NCP file system
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
546147: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=546147
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19
Severity: critical
Justification: causes serious data loss
Like #517449 bug, but with IO on a ncpfs.
This bug increase load average (sendmail stopped & etc).
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (da...@debian.org) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14
01:27:18 UTC 2009
** Command line:
root=/dev/md0 ro quiet hpet=disable
** Tainted: P (1)
** Kernel log:
[1192888.515224] [<c017c5cb>] __link_path_walk+0xaf6/0xb0d
[1192888.515239] [<c018fcf2>] __find_get_block_slow+0xdd/0xe6
[1192888.515253] [<c0190061>] __find_get_block+0x176/0x180
[1192888.515266] [<c015accf>] get_page_from_freelist+0xc1/0x3e3
[1192888.515287] [<e0910170>] __journal_file_buffer+0xa2/0x123 [jbd]
[1192888.515308] [<e0b5e9e4>] ncp_compare_dentry+0x0/0x8d [ncpfs]
[1192888.515323] [<c0182dcf>] __d_lookup+0x7d/0xd7
[1192888.515339] [<c017a665>] do_lookup+0x114/0x153
[1192888.515353] [<c017bd99>] __link_path_walk+0x2c4/0xb0d
[1192888.515382] [<c017c619>] path_walk+0x37/0x70
[1192888.515395] [<c017c8c8>] do_path_lookup+0x122/0x184
[1192888.515408] [<c017d125>] __user_walk_fd+0x29/0x3a
[1192888.515421] [<c017d266>] __user_walk+0xf/0x11
[1192888.515429] [<c0173b69>] sys_chdir+0x15/0x4f
[1192888.515444] [<c0115b67>] do_page_fault+0x29b/0x5b8
[1192888.515457] [<c0172b8d>] filp_close+0x4d/0x53
[1192888.515470] [<c0103853>] sysenter_past_esp+0x78/0xb1
[1192888.515487] [<c02b0000>] aer_probe+0x85/0xff
[1192888.515501] =======================
[1192890.660071] INFO: task rsync:5706 blocked for more than 120 seconds.
[1192890.660083] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[1192890.660089] rsync D 3d72aa8b 0 5706 1
[1192890.660098] df137540 00000082 c0129b82 3d72aa8b 00042037 df1376cc
c1409fa0 00000000
[1192890.660111] c0131a9a df78fbf4 0018b170 00000000 c017ec3e df78fbf4
c017ec5e 00000001
[1192890.660124] d5397578 d5397580 d539757c df137540 c02b8a3c de9e5b9c
def13b9c df137540
[1192890.660136] Call Trace:
[1192890.660161] [<c0129b82>] del_timer_sync+0xa/0x14
[1192890.660186] [<c0131a9a>] remove_wait_queue+0xc/0x34
[1192890.660206] [<c017ec3e>] free_poll_entry+0xe/0x16
[1192890.660219] [<c017ec5e>] poll_freewait+0x18/0x4c
[1192890.660231] [<c02b8a3c>] __mutex_lock_slowpath+0x50/0x7b
[1192890.660257] [<c02b88d2>] mutex_lock+0xa/0xb
[1192890.660265] [<e0b635a7>] ncp_lock_server+0xe/0x2e [ncpfs]
[1192890.660295] [<e0b623c1>] ncp_get_volume_root+0x13/0x192 [ncpfs]
[1192890.660314] [<e0b62a60>] ncp_lookup_volume+0x2c/0x8b [ncpfs]
[1192890.660334] [<e0b5e568>] ncp_lookup_validate+0xdb/0x193 [ncpfs]
[1192890.660437] [<c0182dea>] __d_lookup+0x98/0xd7
[1192890.660456] [<c017a5a4>] do_lookup+0x53/0x153
[1192890.660463] [<c01dcf26>] _atomic_dec_and_lock+0x2a/0x44
[1192890.660476] [<c0186a74>] mntput_no_expire+0x13/0xd9
[1192890.660492] [<c017c5cb>] __link_path_walk+0xaf6/0xb0d
[1192890.660508] [<c018fcf2>] __find_get_block_slow+0xdd/0xe6
[1192890.660524] [<c0190061>] __find_get_block+0x176/0x180
[1192890.660537] [<c015accf>] get_page_from_freelist+0xc1/0x3e3
[1192890.660559] [<e0910170>] __journal_file_buffer+0xa2/0x123 [jbd]
[1192890.660598] [<e0b5e9e4>] ncp_compare_dentry+0x0/0x8d [ncpfs]
[1192890.660613] [<c0182dcf>] __d_lookup+0x7d/0xd7
[1192890.660629] [<c017a665>] do_lookup+0x114/0x153
[1192890.660644] [<c017bd99>] __link_path_walk+0x2c4/0xb0d
[1192890.660672] [<c017c619>] path_walk+0x37/0x70
[1192890.660686] [<c017c8c8>] do_path_lookup+0x122/0x184
[1192890.660699] [<c017d125>] __user_walk_fd+0x29/0x3a
[1192890.660712] [<c017d266>] __user_walk+0xf/0x11
[1192890.660719] [<c0173b69>] sys_chdir+0x15/0x4f
[1192890.660737] [<c0115b67>] do_page_fault+0x29b/0x5b8
[1192890.660754] [<c0172b8d>] filp_close+0x4d/0x53
[1192890.660767] [<c0103853>] sysenter_past_esp+0x78/0xb1
[1192890.660787] [<c02b0000>] aer_probe+0x85/0xff
[1192890.660803] =======================
[1192890.660836] INFO: task rsync:4446 blocked for more than 120 seconds.
[1192890.660842] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[1192890.660847] rsync D 1a03e160 0 4446 1
[1192890.660854] c18848a0 00000086 c0129b82 1a03e160 00042505 c1884a2c
c1409fa0 00000000
[1192890.660867] c0131a9a dec11bf4 00a52245 00000000 c017ec3e dec11bf4
c017ec5e 00000001
[1192890.660879] d5397578 d5397580 d539757c c18848a0 c02b8a3c de79bb9c
c8777b9c c18848a0
[1192890.660891] Call Trace:
[1192890.660898] [<c0129b82>] del_timer_sync+0xa/0x14
[1192890.660911] [<c0131a9a>] remove_wait_queue+0xc/0x34
[1192890.660922] [<c017ec3e>] free_poll_entry+0xe/0x16
[1192890.660931] [<c017ec5e>] poll_freewait+0x18/0x4c
[1192890.660943] [<c02b8a3c>] __mutex_lock_slowpath+0x50/0x7b
[1192890.660959] [<c02b88d2>] mutex_lock+0xa/0xb
[1192890.660966] [<e0b635a7>] ncp_lock_server+0xe/0x2e [ncpfs]
[1192890.660981] [<e0b623c1>] ncp_get_volume_root+0x13/0x192 [ncpfs]
[1192890.661000] [<e0b62a60>] ncp_lookup_volume+0x2c/0x8b [ncpfs]
[1192890.661019] [<e0b5e568>] ncp_lookup_validate+0xdb/0x193 [ncpfs]
[1192890.661121] [<c0182dea>] __d_lookup+0x98/0xd7
[1192890.661137] [<c017a5a4>] do_lookup+0x53/0x153
[1192890.661144] [<c01dcf26>] _atomic_dec_and_lock+0x2a/0x44
[1192890.661153] [<c0186a74>] mntput_no_expire+0x13/0xd9
[1192890.661165] [<c017c5cb>] __link_path_walk+0xaf6/0xb0d
[1192890.661180] [<c0182666>] dput+0x15/0xbb
[1192890.661188] [<c017c4d6>] __link_path_walk+0xa01/0xb0d
[1192890.661199] [<c0182dea>] __d_lookup+0x98/0xd7
[1192890.661213] [<c015accf>] get_page_from_freelist+0xc1/0x3e3
[1192890.661234] [<c017d9d1>] path_lookup+0xf/0x11
[1192890.661246] [<e0b5e9e4>] ncp_compare_dentry+0x0/0x8d [ncpfs]
[1192890.661261] [<c0182dcf>] __d_lookup+0x7d/0xd7
[1192890.661277] [<c017a665>] do_lookup+0x114/0x153
[1192890.661292] [<c017bd99>] __link_path_walk+0x2c4/0xb0d
[1192890.661320] [<c017c619>] path_walk+0x37/0x70
[1192890.661333] [<c017c8c8>] do_path_lookup+0x122/0x184
[1192890.661347] [<c017d125>] __user_walk_fd+0x29/0x3a
[1192890.661359] [<c017d266>] __user_walk+0xf/0x11
[1192890.661367] [<c0173b69>] sys_chdir+0x15/0x4f
[1192890.661382] [<c0115b67>] do_page_fault+0x29b/0x5b8
[1192890.661395] [<c0172b8d>] filp_close+0x4d/0x53
[1192890.661408] [<c0103853>] sysenter_past_esp+0x78/0xb1
[1192890.661425] [<c02b0000>] aer_probe+0x85/0xff
[1192890.661440] =======================
** Loaded modules:
Module Size Used by
ppp_generic 20028 0
slhc 5376 1 ppp_generic
nls_cp866 5024 4
nls_utf8 1760 4
ncpfs 40032 4
ppdev 6500 0
lp 8164 0
vmnet 27228 3
vmmon 1793324 0
ipx 20040 0
p8023 1760 1 ipx
cifs 208724 0
nls_base 6820 4 nls_cp866,nls_utf8,ncpfs,cifs
tun 8292 4
nf_nat_ftp 2528 0
nf_nat_irc 2080 0
nf_conntrack_ftp 6852 1 nf_nat_ftp
nf_conntrack_irc 5124 1 nf_nat_irc
ipt_MASQUERADE 2592 1
iptable_nat 4680 1
nf_nat 15544 4 nf_nat_ftp,nf_nat_irc,ipt_MASQUERADE,iptable_nat
ipt_REJECT 2784 8
xt_limit 2180 11
xt_tcpudp 2816 174
xt_state 2016 245
ipt_ULOG 6820 42
nf_conntrack_ipv4 12268 248 iptable_nat,nf_nat
nf_conntrack 55540 9
nf_nat_ftp,nf_nat_irc,nf_conntrack_ftp,nf_conntrack_irc,ipt_MASQUERADE,iptable_nat,nf_nat,xt_state,nf_conntrack_ipv4
iptable_filter 2624 1
ip_tables 10160 2 iptable_nat,iptable_filter
x_tables 13284 8
ipt_MASQUERADE,iptable_nat,ipt_REJECT,xt_limit,xt_tcpudp,xt_state,ipt_ULOG,ip_tables
ipv6 235364 60
w83781d 25704 0
hwmon_vid 2720 1 w83781d
loop 12748 0
evdev 8000 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_pcm 62596 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
button 6096 0
pcspkr 2432 0
i2c_i801 7920 0
i2c_core 19828 2 w83781d,i2c_i801
iTCO_wdt 9508 0
rng_core 3940 0
intel_agp 22556 1
agpgart 28776 1 intel_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
raid1 18016 3
md_mod 67068 4 raid1
ide_disk 10496 8
ide_pci_generic 3908 0 [permanent]
floppy 47748 0
3c59x 35624 0
mii 4896 1 3c59x
ne2k_pci 7968 0
8390 8256 1 ne2k_pci
uhci_hcd 18672 0
usbcore 118224 2 uhci_hcd
piix 6568 0 [permanent]
ide_core 96136 3 ide_disk,ide_pci_generic,piix
ata_generic 4676 0
libata 140416 1 ata_generic
scsi_mod 129324 1 libata
dock 8304 1 libata
thermal 15228 0
processor 32544 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub [8086:1130] (rev 04)
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge
[8086:1131] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f4000000-f5dfffff
Prefetchable memory behind bridge: f5f00000-f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f3800000-f3ffffff
Prefetchable memory behind bridge: f5e00000-f5efffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC)
[8086:2440] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller
[8086:244b] (rev 05) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at b800 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1
[8086:2442] (rev 05) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller
[8086:2443] (rev 05)
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e800 [size=16]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1
[8086:2444] (rev 05) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV6 [Vanta/Vanta
LT] [10de:002c] (rev 15) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. AGP-V3800 Combat [1043:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at f5ff0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: nvidiafb
02:0b.0 Ethernet controller [0200]: Compex ReadyLink 2000 [11f6:1401] (rev 0a)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at d800 [size=32]
Kernel driver in use: ne2k-pci
Kernel modules: ne2k-pci
02:0d.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone]
[10b7:9055] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d400 [size=128]
Region 1: Memory at f3800000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at f5e00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii linux-doc-2.6.26 2.6.26-19 Linux kernel specific documentatio
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
