Your message dated Tue, 2 Jul 2013 22:28:33 +0200
with message-id <20130702202833.GC4762@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #545449,
regarding linux-image-2.6.26-2-686: Error inserting ebt_ulog: Cannot allocate
memory
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
545449: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=545449
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-17lenny2
Severity: normal
ebt_ulog kernel module fails to load with the following error:
mull:~# modprobe ebt_ulog
FATAL: Error inserting ebt_ulog
(/lib/modules/2.6.26-2-686/kernel/net/bridge/netfilter/ebt_ulog.ko): Cannot
allocate memory
I also tried with various values of the nlbufsiz parameter, down to 0, but with
no results
mull:~# strace modprobe ebt_ulog
...
fcntl64(3, F_SETLKW, {type=F_WRLCK, whence=SEEK_SET, start=0, len=1}) = 0
open("/proc/modules", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0xb7f09000
read(4, "ebtables 16480 0 - Live 0xf89a800"..., 1024) = 1024
read(4, "de_cd_mod,serverworks,ide_pci_gen"..., 1024) = 614
read(4, ""..., 1024) = 0
close(4) = 0
munmap(0xb7f09000, 4096) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=9209, ...}) = 0
mmap2(NULL, 9209, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0xb7f07000
init_module(0xb7f07000, 9209, "") = -1 ENOMEM (Cannot allocate memory)
write(2, "FATAL: Error inserting ebt_ulog ("..., 124FATAL: Error inserting
ebt_ulog
(/lib/modules/2.6.26-2-686/kernel/net/bridge/netfilter/ebt_ulog.ko): Cannot
allocate memory
) = 124
exit_group(1) = ?
same problem reported in
https://lists.linux-foundation.org/pipermail/bugme-new/2005-May/012248.html
context: I was trying to setup a netflow probe with fprobe-ulog, for traffic
port-mirrored by a switch, but mirrored traffic was not captured by
iptables as it was directed to a foreign mac address.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (da...@debian.org) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14
01:27:18 UTC 2009
** Command line:
root=/dev/sda1 ro
** Not tainted
** Kernel log:
[ 1.013472] SCSI subsystem initialized
[ 1.013472] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 18 (level, low) ->
IRQ 18
[ 1.097991] scsi0 : IBM PCI ServeRAID 7.12.05 Build 761 <ServeRAID 5i>
[ 1.101107] scsi 0:0:0:0: Direct-Access IBM SERVERAID 1.00
PQ: 0 ANSI: 2
[ 1.101107] scsi 0:0:15:0: Processor IBM SERVERAID 1.00
PQ: 0 ANSI: 2
[ 1.111618] scsi 0:1:8:0: Processor IBM 32P0032a S320 1 1
PQ: 0 ANSI: 2
[ 1.133644] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.133664] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.263911] Driver 'sd' needs updating - please use bus_type methods
[ 1.263911] sd 0:0:0:0: [sda] 71096320 512-byte hardware sectors (36401 MB)
[ 1.263911] sd 0:0:0:0: [sda] Assuming Write Enabled
[ 1.263911] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1.263911] sd 0:0:0:0: [sda] 71096320 512-byte hardware sectors (36401 MB)
[ 1.263911] sd 0:0:0:0: [sda] Assuming Write Enabled
[ 1.263911] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1.263911] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 1.319915] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.017909] PM: Starting manual resume from disk
[ 2.043236] kjournald starting. Commit interval 5 seconds
[ 2.045364] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.312028] udevd version 125 started
[ 3.663200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.663200] scsi 0:0:15:0: Attached scsi generic sg1 type 3
[ 3.663200] scsi 0:1:8:0: Attached scsi generic sg2 type 3
[ 4.288513] Linux agpgart interface v0.103
[ 4.516133] input: Power Button (FF) as /class/input/input1
[ 4.544138] Uniform Multi-Platform E-IDE driver
[ 4.544228] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 4.590035] ACPI: Power Button (FF) [PWRF]
[ 4.600902] usbcore: registered new interface driver usbfs
[ 4.600902] usbcore: registered new interface driver hub
[ 4.600902] usbcore: registered new device driver usb
[ 4.676428] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[ 4.688071] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 4.688071] ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 11
[ 4.688071] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 11
(level, low) -> IRQ 11
[ 4.688071] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 4.688071] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus
number 1
[ 4.688071] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfebfe000
[ 4.744061] usb usb1: configuration #1 chosen from 1 choice
[ 4.744061] hub 1-0:1.0: USB hub found
[ 4.744061] hub 1-0:1.0: 4 ports detected
[ 4.844399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.844498] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.844595] usb usb1: Product: OHCI Host Controller
[ 4.844677] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 4.844764] usb usb1: SerialNumber: 0000:00:0f.2
[ 4.846544] SvrWks CSB5: IDE controller (0x1166:0x0212 rev 0x93) at PCI
slot 0000:00:0f.1
[ 4.846674] SvrWks CSB5: not 100% native mode: will probe irqs later
[ 4.846790] SvrWks CSB5: simplex device: DMA forced
[ 4.846880] ide0: BM-DMA at 0x0700-0x0707
[ 4.846971] SvrWks CSB5: simplex device: DMA forced
[ 4.847052] ide1: BM-DMA at 0x0708-0x070f
[ 4.848758] Probing IDE interface ide0...
[ 5.586045] hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
[ 5.796634] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 5.796634] Copyright (c) 1999-2006 Intel Corporation.
[ 5.841193] Floppy drive(s): fd0 is 1.44M
[ 5.870988] FDC 0 is a National Semiconductor PC87306
[ 5.968826] input: PC Speaker as /class/input/input2
[ 6.128898] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.263411] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.263622] hda: UDMA/33 mode selected
[ 6.263881] Probing IDE interface ide1...
[ 6.825082] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.825242] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.828994] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 29 (level, low) ->
IRQ 29
[ 6.854414] No dock devices found.
[ 7.102412] e1000: 0000:06:08.0: e1000_probe: (PCI-X:100MHz:64-bit)
00:09:6b:f1:76:38
[ 7.106411] libata version 3.00 loaded.
[ 7.141170] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 7.144615] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 7.144759] ACPI: PCI Interrupt 0000:06:08.1[B] -> GSI 30 (level, low) ->
IRQ 30
[ 7.425304] e1000: 0000:06:08.1: e1000_probe: (PCI-X:100MHz:64-bit)
00:09:6b:f1:76:39
[ 7.461304] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 7.579137] hda: ATAPI 24X CD-ROM drive, 128kB Cache
[ 7.579137] Uniform CD-ROM driver Revision: 3.20
[ 7.963298] Adding 2650684k swap on /dev/sda7. Priority:-1 extents:1
across:2650684k
[ 8.293924] EXT3 FS on sda1, internal journal
[ 8.733361] loop: module loaded
[ 9.999291] kjournald starting. Commit interval 5 seconds
[ 10.016771] EXT3 FS on sda9, internal journal
[ 10.016771] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.999291] kjournald starting. Commit interval 5 seconds
[ 10.027127] EXT3 FS on sda8, internal journal
[ 10.027127] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.048655] kjournald starting. Commit interval 5 seconds
[ 10.054235] EXT3 FS on sda5, internal journal
[ 10.054359] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.067126] kjournald starting. Commit interval 5 seconds
[ 10.076689] EXT3 FS on sda6, internal journal
[ 10.076812] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.709144] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full
Duplex, Flow Control: RX
[ 12.389537] NET: Registered protocol family 10
[ 12.389537] lo: Disabled Privacy Extensions
[ 13.475286] device eth0 entered promiscuous mode
[ 14.156638] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 14.850720] device eth0 left promiscuous mode
[ 24.341647] eth0: no IPv6 routers present
[ 86.175552] Ebtables v2.0 registered
** Loaded modules:
Module Size Used by
ebtables 16480 0
ipt_ULOG 6820 1
x_tables 13284 1 ipt_ULOG
ipv6 235364 18
loop 12748 0
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_generic 4676 0
libata 140416 1 ata_generic
dock 8304 1 libata
serio_raw 4740 0
snd_pcm 62596 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
psmouse 32336 0
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
pcspkr 2432 0
floppy 47748 0
e1000 102560 0
serverworks 4932 0 [permanent]
ohci_hcd 18500 0
i2c_piix4 7216 0
ide_pci_generic 3908 0 [permanent]
i2c_core 19828 1 i2c_piix4
usbcore 118224 2 ohci_hcd
ide_core 96136 3 ide_cd_mod,serverworks,ide_pci_generic
button 6096 0
sworks_agp 6720 0
agpgart 28776 1 sworks_agp
evdev 8000 0
sg 26964 0
ext3 105512 5
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 7
thermal 15228 0
processor 32544 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
ips 36348 6
scsi_mod 129324 4 libata,sg,sd_mod,ips
** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
[1166:0012] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.1 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
[1166:0012]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.2 Host bridge [0600]: Broadcom CMIC-LE [1166:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:06.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: IBM Device [1014:0240]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2400 [size=256]
Region 2: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: <access denied>
00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
Subsystem: Broadcom CSB5 South Bridge [1166:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4, sworks-agp
00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93)
(prog-if 82 [Master PriP])
Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 0700 [size=16]
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks
00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller
[1166:0220] (rev 05) (prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
Subsystem: Broadcom Device [1166:0230]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
06:08.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) [8086:1010] (rev 01)
Subsystem: IBM PRO/1000 MT Dual Port Network Adapter [1014:027c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fbfe0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2500 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
06:08.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) [8086:1010] (rev 01)
Subsystem: IBM PRO/1000 MT Dual Port Network Adapter [1014:027c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 30
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2540 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
08:02.0 RAID bus controller [0104]: IBM ServeRAID Controller [1014:01bd]
Subsystem: IBM ServeRAID-5i [1014:0259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
[virtual] Expansion ROM at 50020000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: ips
Kernel modules: ips
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
