Your message dated Thu, 27 Jun 2013 19:44:39 +0200
with message-id <20130627174439.GH4252@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #671116,
regarding linux-image-3.2.0-2-686-pae: LCD backlight setting doesn't work on HP
ProBook 451x
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
671116: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=671116
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 3.2.15-1
Severity: normal
Hi. This is bugging me for quite some time (more than 6 months now).
I can not configure the LCD backlight brightness on my HP ProBook 4515s.
I tried booting with acpi_backlight="legacy|vendor", but all they did
was to keep the brightness to maximum; keyboard shortcuts didn't do
anything and also "echo 10 > /sys/class/backlight/acpi_video0/brightness"
didn't do anything.
Booting without the acpi_backlight kernel parameter just dims the LCD to
a lower brightness level, but again, I can't change it neither through
the keyboard, nor the sysfs interface. I preffer to keep it to maximum
with the acpi_backlight=vendor.
I also tried booting with "acpi_osi=Linux", but it made no change
whatsoever.
Changing the brightness through the sysfs interface does nothing (it
appears it does, but the LCD doesn't change brightness physicaly):
root@x:~# ls /sys/class/backlight/acpi_video0/
actual_brightness bl_power brightness device max_brightness power
subsystem type uevent
root@x:~# cat /sys/class/backlight/acpi_video0/max_brightness
24
root@x:~# echo 10 > /sys/class/backlight/acpi_video0/brightness
root@x:~# cat /sys/class/backlight/acpi_video0/actual_brightness
10
root@x:~# cat /sys/class/backlight/acpi_video0/brightness
10
Thanks.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.15-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 SMP
Sun Apr 15 17:56:31 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae
root=UUID=c82fd34e-9549-4229-b8d2-5448428acfeb ro quiet splash acpi_osi=Linux
acpi_backlight=legacy
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 9.336426] wl: module license 'MIXED/Proprietary' taints kernel.
[ 9.336431] Disabling lock debugging due to kernel taint
[ 9.375908] wl 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.375921] wl 0000:06:00.0: setting latency timer to 64
[ 9.417024] lib80211_crypt: registered algorithm 'TKIP'
[ 9.417348] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller
5.100.82.112
[ 9.480705] udevd[385]: renamed network interface eth0 to eth1
[ 9.608445] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 9.649756] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input8
[ 10.083499] Bluetooth: Core ver 2.16
[ 10.083523] NET: Registered protocol family 31
[ 10.083526] Bluetooth: HCI device and connection manager initialized
[ 10.083530] Bluetooth: HCI socket layer initialized
[ 10.083532] Bluetooth: L2CAP socket layer initialized
[ 10.083741] Bluetooth: SCO socket layer initialized
[ 10.115934] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.116189] usbcore: registered new interface driver btusb
[ 10.167102] [fglrx] Maximum main memory to use for locked dma buffers: 2644
MBytes.
[ 10.167193] [fglrx] vendor: 1002 device: 9612 count: 1
[ 10.167733] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 10.167750] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.167756] pci 0000:01:05.0: setting latency timer to 64
[ 10.168317] [fglrx] Kernel PAT support is enabled
[ 10.168343] [fglrx] module loaded - fglrx 8.95.3 [Mar 8 2012] with 1 minors
[ 10.413215] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.413223] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.413233] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 10.683313] Linux media interface: v0.10
[ 10.721783] Linux video capture interface: v2.00
[ 10.802078] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 10.859944] input: CNF8243 as
/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input9
[ 10.860060] usbcore: registered new interface driver uvcvideo
[ 10.860063] USB Video Class driver (1.1.1)
[ 11.035918] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input10
[ 11.043631] snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 11.043695] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 12.892361] Adding 2931824k swap on /dev/sda6. Priority:-1 extents:1
across:2931824k
[ 12.895865] EXT3-fs (sda5): warning: maximal mount count reached, running
e2fsck is recommended
[ 12.896337] EXT3-fs (sda5): using internal journal
[ 13.015240] loop: module loaded
[ 14.058260] kjournald starting. Commit interval 5 seconds
[ 14.058384] EXT3-fs (sda7): warning: maximal mount count reached, running
e2fsck is recommended
[ 14.058862] EXT3-fs (sda7): using internal journal
[ 14.058867] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 14.168067] kjournald starting. Commit interval 5 seconds
[ 14.168089] EXT3-fs (sda3): warning: maximal mount count reached, running
e2fsck is recommended
[ 14.168445] EXT3-fs (sda3): using internal journal
[ 14.168450] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 16.234571] fuse init (API version 7.17)
[ 17.401961] NET: Registered protocol family 15
[ 17.420603] alg: No test for cipher_null (cipher_null-generic)
[ 17.420696] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 17.420741] alg: No test for digest_null (digest_null-generic)
[ 17.420798] alg: No test for compress_null (compress_null-generic)
[ 17.456862] padlock_sha: VIA PadLock Hash Engine not detected.
[ 17.479757] padlock_sha: VIA PadLock Hash Engine not detected.
[ 17.548592] Intel AES-NI instructions are not detected.
[ 18.981328] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input11
[ 21.451807] Bluetooth: RFCOMM TTY layer initialized
[ 21.451814] Bluetooth: RFCOMM socket layer initialized
[ 21.451816] Bluetooth: RFCOMM ver 1.11
[ 21.478915] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.478920] Bluetooth: BNEP filters: protocol multicast
[ 21.644365] lp: driver loaded but no devices found
[ 21.664218] ppdev: user-space parallel port driver
[ 28.582618] powernow-k8: Found 1 AMD Turion(tm)X2 Dual Core Mobile RM-76 (2
cpu cores) (version 2.20.00)
[ 28.582677] powernow-k8: 0 : pstate 0 (2300 MHz)
[ 28.582680] powernow-k8: 1 : pstate 1 (1150 MHz)
[ 28.582682] powernow-k8: 2 : pstate 2 (575 MHz)
[ 31.236077] [fglrx] GART Table is not in FRAME_BUFFER range
[ 31.237392] [fglrx] Could not enable MSI; System prevented initialization
[ 31.240648] [fglrx] Firegl kernel thread PID: 2292
[ 31.240847] [fglrx] Firegl kernel thread PID: 2293
[ 31.241136] [fglrx] Firegl kernel thread PID: 2294
[ 31.241350] [fglrx] IRQ 18 Enabled
[ 32.073183] sky2 0000:02:00.0: eth1: enabling interface
[ 32.073617] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 32.473318] [fglrx] Gart USWC size:872 M.
[ 32.473324] [fglrx] Gart cacheable size:344 M.
[ 32.473330] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 32.473333] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 39.227752] vboxdrv: Found 2 processor cores.
[ 39.228462] vboxdrv: fAsync=1 offMin=0x1c0e06e offMax=0x1c0e06e
[ 39.228676] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is
'normal'.
[ 39.228687] vboxdrv: Successfully loaded version 4.1.12_Debian (interface
0x00190000).
[ 39.611955] vboxpci: IOMMU not found (not registered)
[ 41.847618] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 41.848161] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 41.849065] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 41.849669] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 41.849734] ehci_hcd 0000:00:13.2: PME# enabled
[ 42.220095] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xd4409400-0xd44094ff]
(PCI address [0xd4409400-0xd44094ff])
[ 42.220165] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was
0x2b00000, writing 0x2b00013)
[ 42.220228] ehci_hcd 0000:00:13.2: PME# disabled
[ 42.220257] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 42.396244] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.396377] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.420248] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 42.599988] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 42.600611] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
** Model information
not available
** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
michael_mic
arc4
ecb
powernow_k8
mperf
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
deflate
ctr
twofish_generic
twofish_i586
twofish_common
camellia
serpent
blowfish_generic
blowfish_common
cast5
des_generic
cbc
cryptd
aes_i586
aes_generic
xcbc
rmd160
sha512_generic
sha256_generic
sha1_generic
hmac
crypto_null
af_key
fuse
loop
snd_hda_codec_hdmi
snd_hda_codec_analog
uvcvideo
videodev
media
snd_hda_intel
snd_hda_codec
snd_hwdep
fglrx(P)
btusb
bluetooth
snd_pcm_oss
snd_mixer_oss
crc16
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
joydev
lib80211_crypt_tkip
snd_timer
snd
wl(P)
sp5100_tco
soundcore
i2c_piix4
k10temp
i2c_core
battery
shpchp
psmouse
hp_wmi
sparse_keymap
rfkill
serio_raw
pcspkr
evdev
hp_accel
lis3lv02d
ac
input_polldev
power_supply
processor
lib80211
container
wmi
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
sd_mod
crc_t10dif
sr_mod
cdrom
video
ahci
libahci
fan
thermal
thermal_sys
libata
ohci_hcd
button
ehci_hcd
usbcore
scsi_mod
sky2
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge
[1022:9600]
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4200000-d43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d3100000-d41fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2100000-d30fffff
Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: d2000000-d20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 6018 [size=8]
Region 1: I/O ports at 6024 [size=4]
Region 2: I/O ports at 6010 [size=8]
Region 3: I/O ports at 6020 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at d4409000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4409500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4409400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 3a)
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR+ <PERR+ INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
(Intel HDA) [1002:4383]
Subsystem: Hewlett-Packard Company Device [103c:3078]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC
host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=80, subordinate=8f, sec-latency=64
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor
HyperTransport Configuration [1022:1300] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor
Address Map [1022:1301]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor
DRAM Controller [1022:1302]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor
Miscellaneous Control [1022:1303]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor
Link Control [1022:1304]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS780 HDMI
Audio [Radeon HD 3000-3300 Series] [1002:960f]
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4310000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8072 PCI-E
Gigabit Ethernet Controller [11ab:436c] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
06:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g
LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1508]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 006 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface
[Broadcom BCM2045]
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-30
Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros 0.35
pn firmware-bnx2 0.35
pn firmware-bnx2x 0.35
pn firmware-brcm80211 <none>
pn firmware-intelwimax 0.35
pn firmware-ipw2x00 0.35
pn firmware-ivtv 0.35
pn firmware-iwlwifi 0.35
pn firmware-libertas 0.35
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic 0.35
pn firmware-ralink 0.35
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
