--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-41squeeze2
Severity: normal
root@hsctb:/etc# mount /dev/sr0 /media/cdrom0
mount: /dev/sr0: unknown device
that is what returns when manually mounting. I don't see anything if I just
insert a cd...
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-41squeeze2) (da...@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Mar 22 17:26:33 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=5915530d-4e98-4979-86ae-72de126c51ab ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[350012.453280] usb 1-3.2: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[350012.460801] usb 1-3.1.1: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[350094.146126] usb 1-3.2: USB disconnect, address 8
[350094.146596] usblp0: removed
[350094.361323] usb 1-3.2: new high speed USB device using ehci_hcd and address
9
[350094.461551] usb 1-3.2: New USB device found, idVendor=03f0, idProduct=5c11
[350094.461556] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[350094.461560] usb 1-3.2: Product: Photosmart C4200 series
[350094.461562] usb 1-3.2: Manufacturer: HP
[350094.461565] usb 1-3.2: SerialNumber: CN78EJG16C04VP
[350094.461695] usb 1-3.2: configuration #1 chosen from 1 choice
[350094.462356] usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid
0x03F0 pid 0x5C11
[350094.466260] scsi318 : SCSI emulation for USB Mass Storage devices
[350094.466419] usb-storage: device found at 9
[350094.466423] usb-storage: waiting for device to settle before scanning
[350095.882865] usb 1-3.2: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[350095.898726] usb 1-3.1.1: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[350099.265581] usb 1-3.2: USB disconnect, address 9
[350099.266052] usblp0: removed
[350099.469041] usb 1-3.2: new high speed USB device using ehci_hcd and address
10
[350099.564881] usb 1-3.2: New USB device found, idVendor=03f0, idProduct=5c11
[350099.564892] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[350099.564901] usb 1-3.2: Product: Photosmart C4200 series
[350099.564907] usb 1-3.2: Manufacturer: HP
[350099.564912] usb 1-3.2: SerialNumber: CN78EJG16C04VP
[350099.565165] usb 1-3.2: configuration #1 chosen from 1 choice
[350099.566506] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid
0x03F0 pid 0x5C11
[350099.567081] scsi319 : SCSI emulation for USB Mass Storage devices
[350099.567480] usb-storage: device found at 10
[350099.567485] usb-storage: waiting for device to settle before scanning
[350104.565935] usb-storage: device scan complete
[350104.567267] scsi 319:0:0:0: Direct-Access HP Photosmart C4250
1.00 PQ: 0 ANSI: 5
[350104.568648] sd 319:0:0:0: Attached scsi generic sg3 type 0
[350104.576664] sd 319:0:0:0: [sdc] Attached SCSI removable disk
[350108.224737] usb 1-3.2: USB disconnect, address 10
[350108.225123] usblp0: removed
[350108.385727] hub 1-3:1.0: unable to enumerate USB device on port 2
[350108.680938] usb 1-3.2: new high speed USB device using ehci_hcd and address
12
[350108.698840] hub 1-3:1.0: unable to enumerate USB device on port 2
[350108.937406] usb 1-3.2: new high speed USB device using ehci_hcd and address
13
[350109.032680] usb 1-3.2: New USB device found, idVendor=03f0, idProduct=5c11
[350109.032691] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[350109.032699] usb 1-3.2: Product: Photosmart C4200 series
[350109.032705] usb 1-3.2: Manufacturer: HP
[350109.032710] usb 1-3.2: SerialNumber: CN78EJG16C04VP
[350109.032952] usb 1-3.2: configuration #1 chosen from 1 choice
[350109.035621] usblp0: USB Bidirectional printer dev 13 if 1 alt 0 proto 2 vid
0x03F0 pid 0x5C11
[350109.036068] scsi320 : SCSI emulation for USB Mass Storage devices
[350109.036370] usb-storage: device found at 13
[350109.036377] usb-storage: waiting for device to settle before scanning
[350112.320966] usb 1-3.2: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[350112.332703] usb 1-3.1.1: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[350114.037612] usb-storage: device scan complete
[350114.040371] scsi 320:0:0:0: Direct-Access HP Photosmart C4250
1.00 PQ: 0 ANSI: 5
[350114.043925] sd 320:0:0:0: Attached scsi generic sg3 type 0
[350114.052490] sd 320:0:0:0: [sdc] Attached SCSI removable disk
[350468.121781] usb 1-3.2: USB disconnect, address 13
[350468.122264] usblp0: removed
[350468.273867] hub 1-3:1.0: unable to enumerate USB device on port 2
[350468.589529] usb 1-3.2: new high speed USB device using ehci_hcd and address
15
[350468.606263] hub 1-3:1.0: unable to enumerate USB device on port 2
[350468.834206] usb 1-3.2: new high speed USB device using ehci_hcd and address
16
[350468.928413] usb 1-3.2: New USB device found, idVendor=03f0, idProduct=5c11
[350468.928424] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[350468.928432] usb 1-3.2: Product: Photosmart C4200 series
[350468.928438] usb 1-3.2: Manufacturer: HP
[350468.928443] usb 1-3.2: SerialNumber: CN78EJG16C04VP
[350468.928700] usb 1-3.2: configuration #1 chosen from 1 choice
[350468.931904] usblp0: USB Bidirectional printer dev 16 if 1 alt 0 proto 2 vid
0x03F0 pid 0x5C11
[350468.937776] scsi321 : SCSI emulation for USB Mass Storage devices
[350468.938164] usb-storage: device found at 16
[350468.938170] usb-storage: waiting for device to settle before scanning
[350470.357663] usb 1-3.2: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[350470.372872] usb 1-3.1.1: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[350473.936926] usb-storage: device scan complete
[350473.939310] scsi 321:0:0:0: Direct-Access HP Photosmart C4250
1.00 PQ: 0 ANSI: 5
[350473.942429] sd 321:0:0:0: Attached scsi generic sg3 type 0
[350473.949900] sd 321:0:0:0: [sdc] Attached SCSI removable disk
[350761.721838] usb 1-3.2: USB disconnect, address 16
[350761.722308] usblp0: removed
[350761.877172] hub 1-3:1.0: unable to enumerate USB device on port 2
[350762.185420] usb 1-3.2: new high speed USB device using ehci_hcd and address
18
[350762.277003] usb 1-3.2: New USB device found, idVendor=03f0, idProduct=5c11
[350762.277010] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[350762.277014] usb 1-3.2: Product: Photosmart C4200 series
[350762.277018] usb 1-3.2: Manufacturer: HP
[350762.277021] usb 1-3.2: SerialNumber: CN78EJG16C04VP
[350762.277168] usb 1-3.2: configuration #1 chosen from 1 choice
[350762.278695] usblp0: USB Bidirectional printer dev 18 if 1 alt 0 proto 2 vid
0x03F0 pid 0x5C11
[350762.281620] scsi322 : SCSI emulation for USB Mass Storage devices
[350762.282062] usb-storage: device found at 18
[350762.282067] usb-storage: waiting for device to settle before scanning
[350763.709306] usb 1-3.2: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[350763.715870] usb 1-3.1.1: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[350767.280983] usb-storage: device scan complete
[350767.283443] scsi 322:0:0:0: Direct-Access HP Photosmart C4250
1.00 PQ: 0 ANSI: 5
[350767.285344] sd 322:0:0:0: Attached scsi generic sg3 type 0
[350767.295238] sd 322:0:0:0: [sdc] Attached SCSI removable disk
[360813.700954] reportbug[3462] trap divide error ip:7faab0c26cf0
sp:7faaa9698f60 error:0 in libgtk-x11-2.0.so.0.2000.1[7faab0afa000+415000]
[360856.858675] reportbug[3499] trap divide error ip:7f3709219cf0
sp:7f3701c8bf60 error:0 in libgtk-x11-2.0.so.0.2000.1[7f37090ed000+415000]
** Model information
sys_vendor: ECS
product_name: IC780M-A
product_version: 1.0
chassis_vendor: ECS
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: ECS
board_name: IC780M-A
board_version: 1.0
** Loaded modules:
Module Size Used by
isofs 27480 0
udf 66692 0
crc_itu_t 1307 1 udf
powernow_k8 10978 1
cpufreq_userspace 1992 0
cpufreq_stats 2740 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7225 2
bridge 39678 0
stp 1440 1 bridge
bnep 9443 2
rfcomm 29645 0
l2cap 24752 6 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41843 6 sco,bnep,rfcomm,l2cap
rfkill 13060 2 bluetooth
binfmt_misc 6447 1
uinput 6376 1
fuse 50972 1
loop 11799 0
snd_hda_codec_realtek 235698 1
snd_hda_intel 20051 2
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 32607 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_usb_audio 64086 0
snd_usb_lib 13976 1 snd_usb_audio
snd_pcm 60487 4
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_usb_audio
snd_hwdep 5380 2 snd_hda_codec,snd_usb_audio
snd_seq_midi 4400 0
snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
pl2303 13992 1
snd_seq 42913 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15598 2 snd_pcm,snd_seq
uvcvideo 52127 0
videodev 30105 1 uvcvideo
psmouse 49937 0
pcspkr 1699 0
evdev 7352 11
serio_raw 3752 0
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
edac_core 29261 0
v4l1_compat 11442 2 uvcvideo,videodev
usbserial 27692 3 pl2303
nvidia 10670090 48
edac_mce_amd 6449 0
v4l2_compat_ioctl32 8474 1 videodev
snd 46542 16
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_hwdep,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
usblp 9571 0
i2c_piix4 8328 0
i2c_core 15835 3 videodev,nvidia,i2c_piix4
button 4650 0
k8temp 3283 0
soundcore 4598 1 snd
snd_page_alloc 6265 2 snd_hda_intel,snd_pcm
processor 29951 1 powernow_k8
usb_storage 40233 0
ext3 106806 8
jbd 37365 1 ext3
mbcache 5050 1 ext3
sg 24085 0
sr_mod 12602 0
cdrom 29351 1 sr_mod
sd_mod 29953 11
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
pata_atiixp 3505 9
ahci 32886 0
libata 133824 3 ata_generic,pata_atiixp,ahci
sundance 15792 0
tulip 41448 0
thermal 11674 0
thermal_sys 11942 2 processor,thermal
ohci_hcd 19375 0
ehci_hcd 32145 0
r8169 36872 0
mii 3210 2 sundance,r8169
scsi_mod 126789 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 123186 10
snd_usb_audio,snd_usb_lib,pl2303,uvcvideo,usbserial,usblp,usb_storage,ohci_hcd,ehci_hcd
nls_base 6377 3 isofs,udf,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host
Bridge [1002:5957]
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge
(external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd000000-fe9fffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fbf00000-00000000fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Elitegroup Computer Systems Device [1019:4390]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller
[1002:4398] (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fcffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller
[1002:4398] (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fcffb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fcfff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 3c)
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller
[1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383]
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fcff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller
[1002:439d]
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fcffa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce
8400GS] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:6158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at c800 [size=128]
[virtual] Expansion ROM at fe980000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio
Controller [10de:0be3] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:6158]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe97c000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:8111]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fbff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:05.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast
Ethernet 10/100 [1317:0985] (rev 11)
Subsystem: ADMtek Device [1317:0574]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 32000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: tulip
03:07.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IC
Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0200] (rev 31)
Subsystem: Sundance Technology Inc / IC Plus Corp Device [13f0:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at e400 [size=128]
Region 1: Memory at febff800 (32-bit, non-prefetchable) [size=512]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sundance
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 2478:2008 Tripp-Lite U209-000-R Serial Port
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 018: ID 03f0:5c11 Hewlett-Packard PhotoSmart C4200 Printer series
Bus 001 Device 032: ID 03f0:7804 Hewlett-Packard DeskJet D1360
Bus 001 Device 007: ID 0619:0105 Seiko Instruments, Inc. SLP-240 Driver
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 046d:09a1 Logitech, Inc. QuickCam Communicate MP/S5500
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-41squeeze2 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-41squeeze2 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---
